Top Vortex Cantilever Mount Reviews

Vortex Optics Sport Cantilever 30mm Mount - 3-Inch Offset

  • Use this cantilever mount for mounting 30 mm telescopic sights..
  • The 3-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces..
Check Stock

Vortex Optics Sport Cantilever 30mm Mount - 2-Inch Offset

  • Use this cantilever mount for mounting 30 mm telescopic sights..
  • The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.
Check Stock

Vortex Optics Sport Cantilever 1-Inch Mount - 2-Inch Offset (CM-102),Black

  • Use this cantilever mount for mounting 1-inch telescopic sights onto flattop style rifles..
  • The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle..
  • The cantilever ring mount positions thecenterof the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces..
Check Stock

Vortex Optics Sport Cantilever 30mm Ring - Absolute Co-Witness | 1-inch Offset Black

  • Provides extra rail room for rear Back Up Iron Sights (BUIS) when using the StrikeFire red dot along with the VMX-3T magnifier. The cantilever ring....
  • Use this cantilever mount in conjunction with the Tactical 30mm Ring to mount the Viper XBR crossbow scope. The 1-inch offset of this cantilever mount....
  • Provides absolute co-witness mounting height of 37 mm. Will work with most 30 mm red dot sights..
Check Stock

Spend an Evening With Saddle Creek, Bright Eyes, The Faint, Cursive et al [DVD]

  • The Strikefire II Red/Green Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions..
  • Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition..
  • The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance..
  • allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail..
  • With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery. Vortex Optics hat included, hat color may vary..
Check Stock

Vortex Optics Strikefire II Red Dot Sight - 4 MOA Red/Green Dot with Vortex Hat

  • The Strikefire II Red/Green Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions..
  • Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition..
  • The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance..
  • allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail..
  • With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery. Vortex Optics hat included, hat color may vary..
Check Stock

Oakley mens Oo9154 Half Jacket 2.0 Xl Sunglasses, Polished Black/Black Iridium Polarized, 62 mm US

  • The Strikefire II Red/Green Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions..
  • Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition..
  • The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance..
  • allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail..
  • With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery. Vortex Optics hat included, hat color may vary..
Check Stock

HIRAM Dual Ring Offset Cantilever Scope Mount with Quick Release and Integrated Recoil Dampeners for Picatinny Rail, 30mm

  • QUICK MOUNT: Hiram's lightweight 5.96-ounce scope mount comes with pre-set ring spacing and quick release screws to allow for fast and simple installation and swapping of your scopes.
  • DURABLE CONSTRUCTION: Our cantilever mounts are constructed from lightweight and sturdy aircraft-grade 6061-T6 aluminum alloy.
  • the torx screws are also heat-treated for added stability and strip prevention.
  • LONG RANGE: Hit your target from hundreds of yards away since our scope mount's tilt angle allows you to zero in your gun at a greater distance for precision long-range shooting.
  • CANTILEVER DESIGN: Our monolithic scope mount's cantilever design allows you to position your scope up to 2 inches forward for optimal eye relief and increased field-of-view.
  • SATISFACTION GUARANTEED: Our scope mount has been rigorously tested to improve effectiveness and provide the highest-quality firearm accessory on the market.
  • we back these rifle attachments with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come.
Check Stock

RD004T TACFIRE Rd004-T 1x30 Ill Red/grn Dot Sight Tan

  • TacFire Official Product, 1x30mm Tactical Dual-Illuminated Red/Green Dot Rifle Scope Sight in Dark Earth Tan with Cantilever Weaver Base Mount with Lens Covers and Battery Included..
  • Specifications of the Red Dot Sight: Magnification: 1x, Obj. Aperture: 30mm, Field of View: 50 degrees, Eye Relief: Unlimited, Illumination: Red & Green , Reticle Type: Dot, Dot Size: 4 MOA, Material: Lightweight 6061 T6 Aircraft Grade Aluminum.
  • Dimensions of Red Dot: Length: 5.25", Width: 2.56"/65mm, Height: 2.75"/70mm, Net Weight: 9.7 oz..
  • Included in the package: Dual-Illuminated Red/Green Dot Sight x1, Flip-Up lens covers, Cantilever Weaver Base Mount x1, CR2032 Battery x1, Hex Wrench x1, Cleaning Cloth x1.
  • Features of the Red Dot Sight: Durable Cantilever PEPR mount for any 20mm Picatinny or Weaver rail with Quick Attachment Rail Design Allowing Precision Fit, Adjustable Windage and Elevation, Intensity brightness Control Settings Per Color, Fog Proof, Weather Proof, and Shock Resistant, Removable Spring loaded flip-up lens covers..
Check Stock

Vortex Optics Precision Extended Cantilever Mount - 34mm

  • Use this cantilever mount for mounting 34mm tubes..
  • These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base..
Check Stock

Vortex Optics Precision Extended Cantilever Mount – 30mm – 20 MOA

  • Use this cantilever mount for mounting 30mm tubes. Built-in 20 MOA cant..
  • These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base..
Check Stock

Vortex Optics Precision Extended Cantilever Mount for 30MM Riflescopes, Black (CM-530)

  • Use this cantilever mount for mounting 30mm tubes..
  • These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base..
Check Stock

ohhunt 30mm Scope Mount Cantilever Scope Mounts for 30mm Tube Rifle scopes (Tan)

  • 30mm scope mounts with Torx Screws and Square-shaped Integral,Recoil Stops for a Secure and Repeatable Zero Hold..
  • Square-shaped Integral Recoil Stops Perfect fit Picatinny Rail,Slots(Not suitable for Weaver Slots)..
  • The 2.6-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief..
  • Scope mount with a base of 3 inches and 2.36 inches of spacing between the rings..
  • The cantilever ring mount positions the center of the riflescope tube at a height of 1.57 inches (40 mm) from the base..
Check Stock