Top Voltage Tester With Auto Power off Function Reviews

PM2302 Digital Resistance Meter Ground Earth Tester 0-4K ohm Insulation Tester Multimeter with LCD Backlight Display

  • [Multi Functions] This PM2302 resistance tester can be used to measure maximum, minimum or average and measure relatively.
  • low battery indication and 2 Pole and 3 Pole Mode..
  • [Convenient] This insulation tester can store 100 group of test result, which will not be lost even in case of power cuts..
  • [Easy reading] This digital resistance tester is equipped with large digital LCD and backlights that allow users read the information on LCD easily. Digital Display & Analog Bars Display..
  • [Auto power-off function] It has auto power-off function that conserves battery life and increases the lifespan of your multimeter..
  • [Application] It is the ideal tool for electrical inspection and repair..
Check Stock

CMTOOL Power Circuit Probe Kit 9-30V Automotive Circuit Tester, Test Light Automotive Relay Tester Kit, Car Electrical Tester Digital Voltage Tester Continuity Tester Tool with 6m/20ft Extension Cable

  • ...Automotive Circuit Tester with Digital Multimeter Mode】Automotive circuit tester contains the common parameters of multimeters, and can quickly test the DC voltage, resistance, and diode in the circuit system, current, and frequency, bringing a lot of convenience to users..
  • 4.【Electrical Tester with Oscilloscope Function】Circuit probe tester with 6M extension test lead, can display the parameter curve diagram of the tested component, such as voltage, frequency, time, etc. Users also can observe the test results more directly by adjusting the displayed interval..
  • 5.【Power Circuit Tester Kit with Component Activation Function】There is 4 activation modes for the component activation function of the automotive probe tester, which can generate "activation" signals for components, such as lights, motors, and other in-vehicle electronic devices..
  • 6.【Power Circuit Probe Tester for Relay Test & Injector Test】Automotive relay tester function: able to test common automotive relays, such as 5-port relays and 4-port relays. Injector test function: 4 types of pulse models can be output to the injector to better detect the condition of the injector..
  • 7.【Circuit Tester with Voltage Prompt Function】 The output voltage can be set to 0-5V, which is used t....
Check Stock

HoldPeak Digital Smart SMD Tester 6000 Counts HP-990C DMM Handheld Resistance Capacitance Tester,Digital Multimeter Auto Scan with Spare Test Pins (Battery Included)

  • ✅【Non-rusting】The entire outer surface of the tester case has been with thermo plastic elastomer, and Spare Test Pin are included which has been gold-plated, so that can be reduce pin contact resistance and prevent it from rusting..
  • ✅【Wide Range of Application】With the function of the continuity and Diode Test,you can used it for many applications,such as components verification and sorting, production lines, laboratory and service center, in-field repair,battery power test and more..
  • ✅【Auto Power Off】If the tester is idle for more than 15 minutes, the tester will automatically turn off the power.HOLDPEAK 990 SMD tester is a handheld and battery operated small Tool, very convenient to operate and it is easy to measure SMD..
  • ✅【100% Warranty Guarantee】HOLDPEAK come with 2 years warranty and lifetime technical support,if you have any questions about our product,just feel free to contact us, your satisfactory purchase experience is our greatest hope! Looking forward to your consultation..
Check Stock

AUTOOL Power Probe Circuit Tester 9-30V Automotive Power Circuit Diagnostic Tool Car Fuse Relay Electrical System Tester Digital Voltage Short Finder Thermometer for Vehicle Cable Length 3.6Ft

  • ...te】 The circuit probe tester is easy to operate, and all operations can be completed with only two buttons. Briefly press the "M" key on the probe tester to switch five test modes. Briefly press the "Lighting" button on the probe tester to turn on or off the light beside the probe..
  • 【Five Modes Optional】 Multi-function Mode: digital display voltage measurement, on-off test, positive and negative pole test. Voltage Test: digital display voltage measurement. On-off Test: can detect open circuit, path, virtual circuit and real circuit. Positive and Negative Pole Test: determine the positive and negative poles. Temperature Test: the pointer is equipped with a temperature sensor to detect the temperature of the specified contact..
  • 【Excellent Design】 The design of this power short circuit probe is exquisite and compact, only 0.2 pounds, easy to carry and operate. The length of the wire is about 3.6 ft, which can cover the entire engine compartment and facilitate the inspection of the vehicle's electrical system. The high sensitivity probe with a tip makes it easier to touch small and difficult areas..
  • 【Safety Protection】The power short circuit probe has overload protection function. When the voltage or current is overloaded, the circuit tester p....
Check Stock

Signstek UNI-T UT681 Handheld HDMI Cable Tester with Fast Line Collocation for HDMI and Mini-HDMI Connections

  • Application of UT681: UT681 HDMI is a professional tester for HD cable (HDMI 1.2V/1.3V/1.4V/2.0V) test.
  • Function of UT681: It can quickly scan and test up to 19 wires and decide which one is short circuit, open circuit, or in wrong order.
  • Double testing mode: At the power on state, short press the ON/OFF/Option key to switch between scan mode and full display mode. The state indicator flashing style is to identify which mode is chosen.
  • Battery low voltage test: In order to make sure the HD cable tester’s performance, when the battery voltage is lower than about 7.2V, the blue light flashes, prompting to replace the battery.
  • Auto shut down function: when not operation during the last 10 minutes, the instrument will automatically shut down..
Check Stock

HDMI Tester Portable High Definition Network Cable Tester Checker NF-622 LED Indicator to Check Disorder Short Open and Cross Status of HDMI Cables and Hd Wire Test Ideal for Troubleshooting

  • 【Application of UT681】UT681 Handheld HDMI Cable Tester is a professional tester for testing HDMI cable (HDMI 1.2V/1.3V/1.4V/2.0V).It supports two test modes, fast scan mode and full display mode..
  • 【Function of UT681】This Cable Tester Checker can quickly scan and test up to 19 wires and decide which one is short circuit, open circuit, or in wrong order.Support Continuity Test,Short Circuit Test,Crossover Test,Network Cable Test..
  • 【Double testing mode】At the power on state, short press the ON/OFF/Option key to switch between scan mode and full display mode. The state indicator flashing style is to identify which mode is chosen..
  • 【Cable Type That Can Be Measured】Three types of HD cables can be tested: a.Both ends are standard HDMI connectors (Type A - Type A).
  • b.Both ends are HDMI Mini connectors (Type C - Type C).
  • c.One end is HDMI connector, one end is HDMI Mini connector (Type A - Type C).
  • 【Safe Tester】HDMI tester support battery low voltage Test.In order to make sure the HD cable tester’s performance, when the battery voltage is lower than about 7.2V, the blue light flashes, prompting to replace the battery.Auto shut down function, when no operation during the last 10 minutes, the instrument will automatically shut down..
Check Stock

allsun Digital Insulation Resistance Meters Earth Audio Impedance Tester Handheld Megohmmeter Speaker Voice Resistor Ohmmeter LCD Backlight, Yellow(EM480B)

  • 【MEASURING THE ESSENTIAL INFORMATIONS】 Digital Insulation resistance tester has data hold, auto power off feature. Protection circuit provided, avoid damage caused by discharge voltage. True measurement of speaker systems actual impedance at 1kHz..
  • 【LARGE LCD DISPLAY& TIMER FUNCTION】 Digital Ohmmeter with backlight, max display "1999". It has full function protection, anti high voltage circuit design. Convenient protable battery operation. Low battery indication. Timer function for easier operation. The timer can last about 30 seconds minutes after users press TEST button..
  • 【WIDE MEASUREMENT RANGE】The Digital Megohmmeter has high stability and reliability,test voltage among 250V, 500V and 1000V. Measure Range up to 2000MΩ 1000V with Accuracy of ±(2% of reading +2 digits)..
  • 【EASY TO USE】The Megohmmeter tests voltage can be changed by the rotary switch. LED used as normally working indicator under high voltage condition. High ability to withstand high load. Unit symbol display, easy to use..
  • 【WIDELY APPLICATION】Handheld megohmmeter includes carrying case and belt. Most suitable for the needs of insulation resistance check, such as measuring the impedance of loud speaker,a set of soundssystem,home theater and commercial audio system.Po....
Check Stock

Aidetek Electrician Kit Mastech Ms5902 Ms8233b Ms2008a Ms6906 Clamp Multimeter Tester + Screwdriver + flashlight + Wrench + 3 pliers + tool bag

  • MS8233B:The Mastech MS8233B is a manual 19-range fully featured digital multimeter..
  • MS2008A:ACV DCV AC clamp meter auto-manual range resitance diode data hold auto power off backlight.
  • MS5902: disconnect switch detector Breaker convenient search function to quickly find.
  • Test function tripod socket socket connection status LED display.
  • MS6906: MS6906 LCDSCANNER TESTER METER Metal stud pipe Wooden pillar AC voltage detector Wooden.
Check Stock

Digital Pen Type Multimeter INFURIDER YF-38B Handheld Auto-ranging Voltmeter Ohmmeter for DC AC Voltage,Resistance,Ohm Volt Test Meter with Diode Continuity

  • 【High Accurately】Display with 2000 Counts,Volt meter can accurate autoranging measurement for AC DC voltage to 600V:+/-0.5% of reading.Resistance to 20MΩ. Features with data hold,Diode test and Continuity Buzzer..
  • 【Save your Battery】Pen type digital volt tester with auto power off function and low battery indication, it will automatically shut down if you do not further operation after 20 mins..
  • 【Backlight+Flashlight】Press “☀” button on the pen multimeter to turn on bright flashlight and LCD screen backlit, Then you can accurately testing and reading in the darkness..
  • 【Overload Protection】YF-38B pen type digital multi tester features double insulation protection, CE 600V CAT Ⅲ. This volt tester is portable and stable performance, and works well as a voltage pen type and a necessity for a daily usage.  .
  • 【After-Sales Warranty】INFURIDER provide lifetime technical support, if you have any questions with our products. Do not hesitate to contact us! we will respond to you within 24hours..
Check Stock

KAIWEETS Digital Multimeter TRMS 6000 Counts Ohmmeter with 5PCS Alligator Clips Electrical Test Leads Set, Multimeter Measures Voltage Current Amp Resistance Diodes Continuity Duty-Cycle Capacitance T

  • EASY OPERATION - Switch the dial and the LED lights on the jacks will shine accordingly. To plug in the leads is a real ease. Large 2.9” LCD backlight display. Dual Display with bar graph. Flashlight on the back ensures easy use in dimly lit places. Stable Kickstand, pen slot on the back..
  • MULTI-FUNCTION - Non-contact voltage testing and Live function with sound and light alarm. The Sceen changes to red while detecting live wire. Low battery prompt, Data retention, Max/Min data, Auto Power-Off, Auto-Ranging..
  • SAFETY FIRST - IEC Rated CAT III 1000V, CAT IV 600V, CE, RoHS certified. Anti-Burn with double ceramic fuse and thermistor protection circuit. High Voltage Protection is active on all ranges. Double insulated unit. Silicone protective case prevents it from falling damage.
  • AFTERSALES--Combined with Amazon's excellent delivery service, we provide 36-Month after sale service, lifetime technical support. Please feel free to contact us if you have any concerns..
Check Stock

KAIWEETS Digital Multimeter TRMS 6000 Counts Ohmmeter and 23PCS Soft Silicone Test Leads Kit for Multimeter with Electrical Alligator Clips Replaceable Probes Tips Accessories Kit for DMM & Clamp Mete

  • EASY OPERATION - Switch the dial and the LED lights on the jacks will shine accordingly. To plug in the leads is a real ease. Large 2.9” LCD backlight display. Dual Display with bar graph. Flashlight on the back ensures easy use in dimly lit places. Stable Kickstand, pen slot on the back..
  • MULTI-FUNCTION - Non-contact voltage testing and Live function with sound and light alarm. The Sceen changes to red while detecting live wire. Low battery prompt, Data retention, Max/Min data, Auto Power-Off, Auto-Ranging..
  • SAFETY FIRST - IEC Rated CAT III 1000V, CAT IV 600V, CE, RoHS certified. Anti-Burn with double ceramic fuse and thermistor protection circuit. High Voltage Protection is active on all ranges. Double insulated unit. Silicone protective case prevents it from falling damage.
  • AFTERSALES--Combined with Amazon's excellent delivery service, we provide 36-Month after sale service, lifetime technical support. Please feel free to contact us if you have any concerns..
Check Stock

CLHPT VC1018 Non-Contact Voltage Tester,AC 12V-1000V/48V-1000V Electrical Tester Pen Voltage Detector with LED Flashlight Buzzer Alarm Wire Breakpoint Finder (Yellow)

  • ... The safety level of the whole machine conforms to CE CAT.III 1000V CAT.IV 600V, and the body is made of high-quality ABS material, with anti-drop insulation. The electrical tester is safe and double insulated, and the body is equipped with a high-performance sensor chip for accurate detection..
  • Flashlight lighting function: The voltage pen tester with flashlight allows you in the dark environment, no longer afraid of not being able to see the location of the measurement, to eliminate the risk of electric shock..
  • Smart shutdown and low power consumption mode:The automatic power-off function can save and extend the battery life. It will automatically shut down without any operation when not in use within 3 minutes..
Check Stock

BETAFPV BT2.0 1S Battery Charger Voltage Tester Type-C Charger V2 4.35V/5V 1A/2A for 1S Lipo RC Battery Like 300mAh 1S 450mAh 1S 260mAh 1S with BT2.0 Connector

  • 【Updated】Compared with the original BT2.0 battery charger voltage tester, BT2.0 battery charger voltage tester V2 comes with the hidden design of the electric display and charging instructions, which is simple and beautiful.
  • 【Type-C Input Port】BT2.0 battery charger voltage tester designed with Type-C input port to replace the USB port. The charging is no longer limited by the socket, provides pilots more charging options.
  • 【BT2.0 Battery Charger&Voltage Tester】This BT2.0 battery charger voltage tester is customised for RC battery with BT2.0 connector, can also be charged PH2.0 connector battery when you use PH2.0-BT2.0 adapter cable.
  • 【High efficiency】It supports charging 2 lipo batteries with BT2.0 connector at the same time. The charging current is up to 2A, which improves its efficiency and shorten the charging time. Lightweight and easy to carry.
  • 【How to Use】When power-off, the test port can be used as a battery tester while another port does not possess any function. When power-on, the red LED means charging while the green LED is fully charged.
Check Stock