Top Voltage Current Meter Reviews

Automotive Electrical and Electronics Systems and Components: Testing and Repairs: Use of multimeter for Automotive Electrical Diagnostics

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

Power Supply AC Adapter OEM Replacement for Xbox One S Slim Model NP15-120P1A PA-1131-13MX

  • The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps.
  • The 117 multimeter features true RMS for accurate measurements on non-linear loads.
  • The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage.
  • The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on non linear signals.
  • The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Check Stock

CAMWAY Portable Clamp Meter Digital 6000 Counts AC/DC Current TRMS AMP OHM Tester Capacitance Multimeter with Alligator Clips

  • 【Auto/Manual Ranging & NCV】 The 6000counts Meter Automatically Select Appropriate Decimal Point Place.
  • NCV Detects Existence of AC voltage on....
  • 【Clamp Measuring】 Clamp Jaw up to 28mm, Clamp Meter Measures AC Current without Interrupting Circuit, Makes it Much Safer to Use on Mains Cables....
  • 【True RMS Multi-purpose Clamp Meter】 AC/DC Current, Accurate AC/DC Voltage , Frequency, Duty Cycle, Diode, Temperature Test,Capacitance and....
  • 【Continuity Test & Overload Protection Display】 Low Voltage Indication & Overload Protection Designed , Safely Accurately Confirm the Circuit....
  • 【Convenient to Use】 Meter size 210×110×45mm Portable . High Resolution , Low Battery Display. Large Backlit LCD Screen Improves Visibility.....
Check Stock

Charge-Discharge Monitor, DROK 0-90V 100A DC Ammeter Voltmeter, Battery Capacity Amp-Hour Watt-Hour Power Time Multimeter, LCD Display Digital Voltage Current AH WH Watt Meter Tester with Hall Sensor

  • 7-IN-1 MULTIMETER --- measure and display voltage (0-90V), current (0-100A), power, battery capacity, amp-hour, watt-hour and time simultaneously..
  • APPLICATION --- can be used as battery charge-discharge tester meter for automobile and car battery.
  • as battery capacity monitor for photovoltaic system.
  • as voltage meter, current meter, power meter, etc..
  • BIDIRECTIONAL AMMETER --- the multimeter can detect current in dual direction without changing the wiring direction when used for monitoring charging and discharging..
  • PROTECTION --- over-voltage protection, over-current protection, over-power protection, over-charged protection, time limitation, etc..
  • automatically/manually switch off LCD screen.
  • with output control button to enable/disable output (requires a relay)..
Check Stock

Milwaukee 2235-20 400 Amp Clamp Meter

  • 400A MAX AC/DC CURRENT RANGE: Reads both AC and DC current. With 9 functions it’s the perfect meter for the professional electrician.
  • MORE ACCURATE: Equipped with true RMS accuracy this clamp meter won’t leave you guessing weather your readings are correct.
  • HIGH SAFETY RATING: Feel safe on the job knowing Southwire’s clamp meter is CAT III 600V safety rated.
  • BUILT-IN NON-CONTACT VOLTAGE DETECTOR: Helps identify where live voltage may be present before working on electrical installations or troubleshooting.
  • CONVENIENT THIRD-HAND TEST PROBE HOLDER: The clip on the back of the clamp meter allows you to hold a test lead in one hand and the meter and the other test lead in your other hand making the testing process easier.
  • BUILT IN WORK LIGHT: The built-in work light is an extra convenience feature that allows visibility even in dimly lit areas.
  • WHAT’S INCLUDED: Carrying case, clamp meter, test leads, type K temperature probe with banana plug adapter, AAA batteries and instruction manual.
Check Stock

Dmyond 3pcs DC Panel Digital Dual Display Voltmeter Ammeter Current Meter 0-100V & 0-10A Amp Volt Multimeter 0.28 LED Voltmeter Ammeter Red&Blue

  • Working voltage of Meter itself:DC 4 - 30V(The maximum input voltage can not exceed 30V. Otherwise the meter will be burned).
Check Stock

Battery Monitor, DROK Amp Volt Power Watt Meter DC 0-300V 200A STN LCD Display Panel Meter, Current Voltage Energy Capacity Ammeter Voltmeter Multimeter Gauge with Hall Sensor, 2.5m Shielded Wire

  • Multifunctional Meter ---- DROK multimeter panel measures percentage and AH of remaining battery capacity, DC positive and negative bidirectional current, DC voltage, DC power and DC accumulated electric energy. Voltage measurement range is DC 0-300V, current measurement range is 0-200A..
  • Hall Sensor & Easy Mount ---- The voltage amperage meter is equipped with a Hall transformer for isolated measurement, which is more reliable and safer. Both two-wire and three-wire connection are available, two wires for testing 5-90V, three wires for monitoring 0-300V. Much more convenient with the long 2.5m shielded wire..
  • STN LCD Screen ---- The backlight of this battery capacity monitor can be controlled to be ON or OFF at user’s need.
  • Equipped with full view STN LCD screen, users could see the display clearly whenever at night and day, indoor or outside, even under the sunshine..
  • Alarming Function ---- The tester will alarm and flash when the real voltage or current is higher or lower than preset alarming ones, or the remaining capacity of battery is low..
  • Wide Applications ---- Can be used as dc amp meter, digital volt meter, power meter, battery capacity monitor. Suitable for all kinds of batteries, such as Lead-acid batteries, Lithium Polymer batteries, lithi....
Check Stock

ZOTEK ZT-QS9 Inrush Clamp Meter TRMS 6000 Counts NCV Detector，Auto-ranging Amp Voltage Tester with Backlight Measures AC/DC Current AC/DC Voltage Capacitance Resistance Diodes Continuity

  • True-RMS clamp meter:This multimeter can accurately measure 600 Amp AC/DC Current,600V AC/DC Voltage.It is the perfect troubleshooting tool for....
  • Inrush Current Meter: The value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting....
  • Advanced features:The clamp meter has a low input impedance (LoZ) mode,which can provide higher accuracy readings..
  • NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage.
  • Easy To Use:one-handed operation,With data hold and peak hold,Zero/Fire Wire Identification,Automatically shut down when the meter is not used for 15....
Check Stock

allsun em3085a 3 3/4 Digits Auto Ranging Pocket Digital Multimeter Mini Electrical Mete AC/DC Ohm Volt Amp Capacitance Frequency Diode Continuity LCD Home Measuring Tool

  • Digital multimeter measures alternating current (AC) voltage and direct current (DC) voltage to 600 volts (V), resistance to 6 megaohms, capacitance to 2,000 microfarads, frequency to 30 kilohertz (kHz), and AC and DC microcurrent to 2,000 microamp.
  • Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform.
  • Non-contact voltage detector senses AC voltage without making contact with the circuit.
  • Meter measures 4.4 x 2.1 x 0.4 inches (H x W x D) and can be carried in a shirt pocket when not in use.
  • Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category II installations up to 600V and category III installations up to 300V.
  • Safety: CAT II 600 V,CAT III 300 V,Pollution Degree 2, Class 2.
  • AutoTect feature directs the meter to know if it is measuring ac or dc volts or resistance with no user interface.
  • The AutoTect feature has lower input impedance which zeros out ghost voltages.
  • Voltect feature is a built-in, non-contact voltage detector.
Check Stock

KAIWEETS HT208D Inrush Clamp Meter 1000A True RMS AC/DC Current Amp Meter VFD LOZ Mode 6000 Counts Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle

  • True-RMS Clamp Meter: This multimeter can accurately measure 1000 Amp AC/DC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity, and Temperature. Easy to use for labs factories and households..
  • Inrush Current Meter: Knowing the value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting circuit. The measuring time of the inrush current is about 100ms. When the current is greater than 10A, the Inrush function works well. The inrush function is only available in AC current mode, DC current does not have the inrush function..
  • NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage. A convenient LED flashlight illuminates a dimly lit area..
  • Advanced Functions: The Clamp Meter has Variable Frequency Drive Filtering (VFD) and low Input Impedance (LoZ) modes, which can provide higher accuracy readings..
  • Safety Service: Safety standard IEC 61010-1, CAT IV 600V, CAT III 1000V. Double insulation. Use high-quality material, to prevent electric shock harm. 36-Month product service provided. 7/24 Customer Service..
Check Stock

IDEAL INDUSTRIES INC. 61-744 Clamp Meter 600 Amp AC with NCV, Voltage Indicator, CATIII for 600v

  • [Auto-Ranging Clamp Meter]: The meter measures AC Current to 600 amp, AC and DC Voltage to 600 V, Resistance to 40MΩ and Capacitance to 4MF. Does not measure DC Current..
  • [True-RMS Amp Meter]: The sensing meter accurately measures distorted waveforms and provides true readings when measuring linear or non-linear loads..
  • [Advanced Functions]: Auto-off of inactivity after 15 minutes, Data Hold, MAX/MIN Reading, Low Battery Indicator and Continuity Loud Buzzer..
  • [Two-Color Backlight and Work Light]: Two-color backlit LCD Display - When the voltage 003e 80V, the current 003e 3A, the LCD backlit screen turns orange to warn you, The LCD Backlit Screen and Work Light make it easy to use in a dark working area..
  • [Suprior Safety and Service]: Standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service..
Check Stock

AstroAI Digital Clamp Meter Multimeter 2000 Counts Amp Voltage Tester Auto-ranging with AC/DC Voltage, AC Current, Resistance, Capacitance, Continuity, Live Wire Test, Non-contact Voltage Detection

  • Versatile Digital Clamp Meter: Accurately measures AC Current (DO NOT MEASURE DC CURRENT)! AC/DC Voltage, Capacitance, Resistance, Diode Continuity and Live Wire Tests. This clamp meter is a really useful tool for solving industrial and household electrical issues.
  • Large Jaw Opening: The jaw opening measures AC current in a conductor without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces.
  • Thoughtful Design: Support Data Hold, Max/Min, Auto Shut-off, low battery indicator and continuity buzzer. Includes Convenient features like Audial and Visual Alarm, LCD Backlit Screen and Flashlight make it easy to use. Two 1.5V AAA batteries are included in the package.
  • Non-contact Voltage Testing: This Clamp Meter features non-contact voltage testing with sound and light alarm. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a quick beep.
  • Additional Tips: The clamp meter has passed the environmental pollution degree 2 and overvoltage category III 600V safety standards. Combined with Amazon's excellent delivery, we provide lifetime....
Check Stock

INFURIDER Digital AC/DC Volt Amp Clamp Meter,Wireless Bluetooth Auto Ranging 1000A Ammeter Clamp Multimeter for Voltage,Current,Ohm,Cap,Temperature Tester

  • ⚡【AC/DC Clamp Meter】: The highly sensitive AC DC volt amp clamp multimeter feature with TRMS 6000 counts auto-ranging, be able to accurately measure AC/DC voltage,AC/DC current to 1000A,resistance,capacitance,diode,temperature(℃/℉),Hz,continuity buzzer test,etc..
  • ⚡【Remote Display Via Bluetooth】：Scan the QR code and download the APP first.The wireless Bluetooth digital clamp multi-tester will auto connect with your smart phone in the AILink app(within 15m).Which convenient for you to monitor,log and analyze the max/min/current of volt amp ohm in real time..
  • ⚡【Safety & Protection】：The amperage meter with rubber sheeve to protect your volt meter from being broken by fallen. Overload protection is up to standard of CATⅡ1000V or CATⅢ600V in all range.Non-contact voltage(NCV) function can detect voltage without touching any wires and avoid electric shock ..
  • ⚡【Easy to Operation】：The True-RMS voltmeter ammeter with large backlight display,you can read and record the value easily in darkness.Feature with data hold,low battery indication,auto range function.Press “REL” will show the relative testing and zeroing the clamp tester to obtain more accurate measurement..
  • ⚡【Accurate Current Meter】The AC DC Current measureme....
Check Stock