Top Vitrified Cbn Wheel Reviews

Sopko 100-1 L.H. 2-1/4\ Diam Grinding Wheel Adapter for 3/4\ Wheel Width

  • Series II wheels are made from an aluminum core, which is lighter in weight than steel and will run smoother on all grinders.
  • Ideal for sharpening woodturning tools (High Speed Steel only).
  • Designed for use with bench type grinders.
  • Wheel diameter does not change over time.
  • CBN material is on the face and sides (1/4") of the wheel.
  • Balanced in the manufacturing process and never need "Truing" or "Dressing".
Check Stock

Drill Bit Sharpening Tool Portable Diamond Drill Bit Grinder for Drill Polishing Wheel Drill Bit Sharp Sharpener Universal Fits 1/4” (6.35mm) with Extra Corundum Grinding Wheel Screwdriver Wrench

  • 【Grinding wheel is optional:】 CBN or SDC. The CBN model is used for High speed steel material.
  • while the SDC model is used to grind alloy tungsten steel material..
  • 【Angle adjustable:】 point angle 100° (90 ) ~ 135° , adjust the grinding angle by changing the positioning pin, and control accurately..
  • 【11-Standard collet:】 Grinding range: ф3-ф13 (ф3, ф4, ф5, ф6, ф7, ф8, ф9, ф10, ф11, ф12, ф13).
  • 【Upgrade:】Upgrade the knife seat for more accurate positioning.
  • upgrade the grinding seat for more convenient grinding, put it in the collet, and it can be completed once in 180 °.
  • 【Strong DC motor:】 electronic control DC motor is stable frequency, strong horsepower, prolonged use and low noise..
Check Stock

The Roman Spring of Mrs. Stone

  • Made of green silicon carbide in a vitrified bond.
  • Long service life because of hard silicon carbide.
  • HIGH PERFORMANCE: PFERD Bench grinding wheels offer a high dimensional stability and abrasive performance for working with a large variety of materials and for many different applications.
  • COMPATIBILITY: PFERD high-quality bench grinding wheels have been adapted to the standard bench grinders on market. Telescopic bushings for mounting on almost any bench grinder spindle are integrated.
  • CARBIDE TYPE: CARBIDE type bench grinding wheels are used on hard materials, such as for sharpening tungsten carbide tools. Materials that can be worked are also glass or hardened, heat treated steels.
  • LONG SERVICE LIFE: Dressing the disc on a regular basis exposes sharp grain and maintains an even grinding area. Constantly adjust the workpiece support to the wheel diameter, gap width max. 1/8''.
  • DELIVERY KIT: 1 x PFERD Bench grinding wheel | Vitrified bond | CARBIDE type | 6'' dia. | 3/4" thickness | 1'' bore | Flat (type 1) | Green silicon carbide | 120 Grit | Max. RPM: 4,140 | EDP 61787.
Check Stock

MRCM Drill bit Sharpener for High-Speed Steel, Masonry, Carbide, Cobalt, & TiN-Coated Drill Bits,with Adjustable Angles from 90° to 135°,Sharpens 3mm-20mm Drill Bits… (MR-20G)

  • Capable of sharpening drill bit from 90°to 135°point angle of either a standard or split point..
  • Sharpens Standard Drill Bits – from 3mm" to 20mm" standard twist bits.Capable of setting the trimming angle to adjust the amount of material taken off on the center point of the drill bit,which will allow production of various drill bits to accommodate different material.
  • Grinding wheel is optional: CBN or SDC. The CBN model is used for High speed steel material.
  • while the SDC model is used to grind alloy tungsten steel material..
  • Capable of sharpening the front rake,front tip angle and clearance angle of drill bits.
Check Stock

JET JBG-8W 8-Inch Bench Grinder with Wire Wheel 577128

  • HEAVY-DUTY CONSTRUCTION: For demanding environments..
  • MAINTENANCE-FREE GRINDING: Totally enclosed pre-lubricated ball bearings..
  • SAFETY: Cast iron wheel guards and dust ports, and adjustable eye shields and spark guards..
  • ROCK SOLID: Rubber mounts prevents movement..
  • VERSATILITY: Includes a 36-grit vitrified aluminum oxide wheel, and a crimped wire wheel..
Check Stock

JET JBG-6W, 6-Inch Shop Grinder with Wire Wheel (577126)

  • PLENTY OF POWER: Heavy-duty 1/2-HP motor spins wheels at 3,450 RPM..
  • VERSATILITY: Includes a 36-grit vitrified aluminum oxide wheel, and a crimped wire wheel..
  • ADAPTABLE: Pre-drilled base for mounting on a stand or workbench..
  • HEAVY-DUTY: Cast iron construction can handle demanding environments..
  • SAFETY: Cast iron wheel guards and dust ports, and adjustable eye shields and spark guards..
Check Stock

CITCO Tools Aluminum Oxide Dressing Sticks, 150 grit, 1" x1" x 6", Made in The U.S.A. - 5 Pack

  • Diamond & CBN wheel dressing applications.
Check Stock

Lincoln Electric KH236 Bench Grinding Wheel, Aluminum Oxide, 4000 rpm, 6\ Diameter, 1-1/4\ Arbor, 60 Grit (Pack of 3)

  • Precision Made Solid Aluminum body 8" dia by 1/4" with CBN on the face and 1/4" sides of the wheel. For 5/8 inch shaft..
  • Designed for use with slow speed 8 inch bench type grinders.
  • Will never need dressing, or truing. Wheel Diameter stays the same, so you will not need to be keep adjusting your jig. Now includes two precision ground, parallel surface washers..
  • Use with High Speed Steel (HSS)Tools Only.
  • Note: These wheels are made with very tight tolerance's. The arbor hole is precisely cut to .6254 inches. The shaft on many grinding motors are not as precise, and may be slightly larger then .625 inch. This will cause an interference fit. A little bit of emery cloth on the shaft will help get the wheel on..
Check Stock

CITCO Tools Aluminum Oxide Dressing Sticks, 150 grit, 3/8" x 3/4" x 4", Made in The U.S.A. - 5 Pack

  • Diamond & CBN wheel dressing applications.
Check Stock

Kaka Industrial TX-X3 Φ4-Φ14 mm Drill Bits Sharpener and Grinder 6 Collects End Mill Re-Sharpener Portable Grinding Sharpening Machine CNC Router Bit Sharpener with Adjustable Angle

  • Portable idiot end mill sharpener can grind 2-flute, 3-flute, 4-flute end mill..
  • Grinding is accurate and rapid, easy operation with no skill to grind..
  • It can be equipped directly with an accurate angle and long service life. Standard with SDC grinding wheel for the Carbide material, Optional CBN grinding wheel for the HSS material..
Check Stock

Norton Grinding Wheel 7 Inch Grinding Wheel for General Purpose Grinding and Stock Removal Pack of 1

  • This grinder wheel is a Type 01 grinding wheel made with aluminum oxide that is an ideal choice for general purpose grinder jobs as it provides a consistent performance at an economical price.
  • Developed with the most versatile vitrified bond, this grinding wheel is recommended for CNC cutting tool machines up to 3600 RPM.
  • Made from aluminum oxide to ensure longevity, this grinder wheel provides consistent balance and dimensional accuracy, ideal for toolroom applications with a light to moderate feed rate.
  • Made in the USA in ISO certified facility.
  • Wheel type is Type 01 with a 1/2 inch thickness, Dimensions: 7 x 1/2 x 1-1/4 Inches. Comes as a pack of 1 grinder wheels.
Check Stock

POWERTEC 15505 White Aluminum Oxide Grinding Wheel 8-Inch by 1-Inch 5/8-Inch Arbor 120 Grit

  • INCLUDES: (1) Bench Grinder Grinding Wheel w/ vitrified bond.
  • APPLICATIONS: Medium 120 Grit grinding wheel works exceptionally well on steel, and can be used for stock removal or as a drill bit sharpening tool or part of a lathe tool sharpening system.
  • COMPATIBILITY: 8” bench grinder wheel is designed to fit and work with most pedestal and bench grinder machines.
  • FEATURES: Maximum cut rate and cool cutting action on hardened or high-speed tool steels.
  • QUALITY SPECS: Premium white aluminum oxide wheel measures 8 inches in diameter, 1” in thickness, comes with a 5/8” arbor hole size, and possesses a 3600 maximum RPM.
Check Stock

Dremel Max Life EZ506HP 1-12“ (38.1mm) High Performance Premium Metal Cutting Wheel , Blue

  • Dremel's line of Max Life high-performance rotary tool accessories provide long-lasting performance and impressive durability. Built to give you longer lasting, stronger performing, versatile accessories..
  • The Max Life EZ506HP Premium Metal Cutting Wheel is coated with super abrasive grit called cubic boron nitride (CBN) which provides maximum durability allowing the wheel to remain sharp longer, stay cool, and won’t shrink..
  • Lasts 20X longer than our Fiberglass Reinforced cutting wheels..
  • Ideal for cutting a variety of metals including stainless steel, nails, rebar, metal studs, threaded rod, copper, conduit, metal HVAC ducts, metal door jambs, and galvanized strut..
  • The Dremel EZ-Lock is the first patented system of its kind making accessories changes 6X faster compared to using a standard mandrel. Accessory changes are quick and easy by eliminating the need for a screw and a screwdriver..
Check Stock