Top Viscous Fan Reviews

Powerbuilt Fan Clutch Wrench Master Kit, 10 Piece, Remove, Wrenches Loosen Fan Clutches, Ford, Chrysler, GM, Imports, Storage Case - 648651

Made to be the most reliable tools in the market today.
Tool set for removing threaded-on viscous fan clutches.
Includes smaller spanner-type wrenches for engaging the hex nut on the fan clutch.

Check Stock

Yemtuls Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Work with Air Compressor Pump

Fan clutch wrench is designed to easily remove lock nuts on the temperature dependent thermo-viscous fans.
This fan clutch removal tool kit allows user to hold the water pump pulley in place while loosening the radiator fan.
Size: 32mm (1.26"),Wrench is 15" long, Holder is 15.75" long. Specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts, letting you service your timing or water pump quickly and easily.
Compatible for M4,M10,M20 ,M30, M40,M44,M50,M52,M52TU,M54,M56,M60, M70, M73, S14, S38, S54, S50B30, S50B32.
Constructed from high strength steel for durability and a long life.

Check Stock

EASYUSE 2-Piece Fan Clutch Wrench Set,Removal Tool for BMW, Mercedes, Ford and Other Engine Models,Fan Clutch Nut Wrench & Water Pump Holder

[DURABILITY]:Constructed from premium high strength steel, this fan clutch wrench set is built to last a lifetime, and the rubber grip helps to prevent hand fatigue during prolonged use..
[COMPATIBILITY]:Made for but not limited to the following engine models M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B3.
[INCLUED]:1 pc Wrench, 1pc Fan Clutch Holder.
[DESIGN CONSIDERATIONS]: Our 32mm 2-piece Fan Clutch Wrench Set is designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan. This tool allows the user to easily hold the water pump pulley in place while loosening the radiator fan..
[EASY TO USE]: Easily remove the lock nuts on temperature dependent viscosity drive fans.
easily hold the water pump pulley in place while loosening the radiator fan..

Check Stock

GMB 930-2360 Engine Cooling Fan Clutch

Designed with OE manufacturing technology.
Reduced warm up time and optimized engine performance.
Enhanced fin design for maximum heat dissipation, as well as, reduced fan noise and vibration during acceleration or cruising.
Thermal (viscous), Non-Thermal, Electric, Standard, Heavy Duty, and Severe Duty versions available.

Check Stock

YHB 32mm & 36mm Fan Clutch Nut Wrench and Water Pump Holder Tool Kit Removal for BMW Fan Clutch Tool Removal kit (3pcs) - Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit

【Item name】 Fan Clutch Nut Wrench, Clutch Removal Tool Kit, Fan Clutch Wrench Set, Water Pump Holder Removal Tool Kit, designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan..
【Compatible with】Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36.
【Applications】32mm Clutch Removal Tool Kit Made to be compatible with BMW engine models M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32.
【Features】FEXON Fan Clutch Wrench Set makes it easy to hold water pump pulleys in place while you loosen and service your radiator fan. The tools have been heat treated to improve product performance..
【Easy to Use】Quickly removes and installs fan clutch when repairing the water pump or fan clutch..

Check Stock

Prokomon 32mm Fan Clutch Nut Wrench Water Pump Holder Removal Tool Kit for BMW E34 E39 E36 E46 E90

DESIGN CONSIDERATIONS: Our 32mm 2-piece Fan Clutch Wrench Set is designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan. This tool allows the user to easily hold the water pump pulley in place while loosening the radiator fan..
DURABILITY: Constructed from premium high strength steel, this fan clutch wrench set is built to last a lifetime, and the rubber grip helps to prevent hand fatigue during prolonged use..
COMPATIBILITY: The ARES Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to, the following applications: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, and S50B32..
RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 2-Piece Fan Clutch Wrench Set, simply contact customer service for troubleshooting help, parts, replacement, or refund..
ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization..

Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
The holder bar keeps the water pump pulley in place while loosening the radiator fan.
FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
Also compatible with some Ford, GM, and Chevy models.
Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....

Check Stock

Powerbuilt Fan Clutch Wrench Kit, 4 Piece, Remove Fan Clutches, Ford, Chrysler, Jeep, Some Import Vehicles, Storage Case - 648746

Removes threaded-on viscous fan clutches on Ford, Chrysler, Jeep and some import vehicles.
Durable storage case with step-by-step instructions.
Precision-built to meet or exceed ANSI standards.
Strong and dependable enough to last a lifetime.
Kit includes usage instruction with photos.

Check Stock

ZKTOOL 32mm&36mm Fan Clutch Nut Wrench Set Fit for BMW Ford GM, Chevrolet,Nut Water Hub Removal, Removing Holding Holder Clutch Tool,Water Pump Holder Removal Tool.

【WIDE APPLICATION】 This SCITOO 2pc Water Pump Tool Suitable for various engines: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32..
【EASY TO USE】 SCITOO Fan Clutch Nut Wrench Water Pump Holder Tool are manufactured to the OE specification for exactly fitment to lock nuts on the thermo-Viscous fans and hold the water pump pulley in place while loosening the radiator fan. Direct replacement, which can work smoothly, can help you save a lot of money..
【QUALITY ASSURANCE】 Construct from high quality steel and have went through vehicle try-on testing to ensure the quality is qualified and durable, ensure long service life. Suitable for home use and professional mechanics..
【PACKAGE INCLUDED】 Come with 1pc Fan Clutch Wrench, 1pc Fan Clutch Holder, plug and play..
【IMPORTANT NOTE】 We provide 1 year warranty for you. When doing automotive maintenance always make sure all the tools are correctly used . Any question or problem, feel free to contact us..

Check Stock

OMT Fan Clutch Removal Tool Kit, 32mm and 36mm Fan Clutch Wrench Set Compatible with BMW Ford Mercedes-Benz More, 2pc Water Pump Holder Tool 15' Water Pump Pulley Holder for German Engine Maintenance

CUSTOM PURPOSE SET: This 2 piece fan clutch removal tool kit includes an extra-long 32mm & 36mm fan clutch wrench and a water pump holder tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines.
HIGHLY VERSATITLE: This fan clutch nut wrench set precisely fits a wide range of engines, including the M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32 and more.
GALVANIZED CARBON STEEL: This fan clutch wrench set is made from heavy duty structural steel for reliable strength along the entire shaft.
each one is further galvanized to resist wear, tear, and corrosion under even punishing use.
EASE OF USE: The wrench and water pump pulley holder tool are specially lengthened to provide extra leverage with sure grip when working on fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly.
SERVICE & SUPPORT: OMT backs this water pump removal tool with a 1 year strong warranty and its usual friendly 24/7 customer service, ensuring that you'll enjoy easier checks, maintenance, and repair on your import cars for years to come.

Check Stock

Fuji Industrial Spray Equipment PLATINUM-T75G Fuji 2895-T75G Q5 Platinum Quiet HVLP Spray System Blue

The extra power allows for less thinning of viscous paints and achieves finer atomization5-Stage Turbine produces 9 5psi featuring Variable Speed....
Quiet turbine - Patented noise reduction feature + Heat Dissipation Chamber (HDC).
Professional Spray Gun features convenient side Pattern Control Knob to adjust size of fan pattern from small to large.
25ft hose includes air control valve to reduce overspray and bounce back.

Check Stock

BISupply Brass Drum Faucet 3/4 Inch - 55 Gallon Drum Spigot Drum Nozzle 55 Gal Drum Spout for 2000 SSU Viscous Liquid

[Dispense Viscous Liquids]: The BISupply 3/4 Inch Brass Drum Tap 55 Gallon Barrel Spout allows for easy dispensing of viscous noncorrosive flammable liquid such as automotive coolant, adhesive, paint, or heavy oil above 2000 SSU (approximately 30W oil).
[Use Your Drum]: 3/4-Inch NPT thread size fits most barrels and is compatible with 2-inch viscous liquids valve (sold separately by BISupply).
[Built to Last]: Barrel faucet kit constructed from brass for maximum strength and longevity.
Polytetrafluoroethylene O-ring (PTFE) seal.
[Prevent Fire Flashback]: Internal flame arrester prevents flashback of fire into your drum.
[No More Leaks]: Screw tightly into drum and can be adjusted to dispensing position (with spout downward) without damaging threads or causing leakage.

Check Stock

WATERWICH Fan Clutch Compatible with Ford 2003 2004 2005 2006 2007 F250 F350 F450 F550 Super Duty, Excursion, E-350 E-450 E-550 6L V8 Powerstroke Diesel Engines Replace# 3261 YB632

1.Made of high quality material ,Can effective anti-oxidation and anti-corrosion,Manufactured with the best finish craft for Direct Replace,Built to meet or exceed original equipment performance..
2.Replace Number# Replacement OEM ( Original Equipment Part) Number: YB632, 3261, 46030, 4C3Z8A616AA, 77717, 922504, 925-2320, G5010-213026-MTR, MOFYB 632, SK46030 , Commonly compatible with the popular 6L V8 Powerstroke Diesel Engines..
3.Perfect match to the original equipment: Compatible with E-350 Club Wagon 2004-2005 / Compatible with E-350 Super Duty 2004-2010 / Compatible with E-450 Super Duty 2004-2007 / Compatible with Excursion 2003-2005 / Compatible with F-250 Super Duty 2003-2007 / Compatible with F-350 Super Duty 2003-2007 / Compatible with F-450 Super Duty 2003-2007 / Compatible with F-550 Super Duty 2003-2007 /.
4.Reduce noice, lower power consumption and adjust engine cooling intensity efficiently,Thermostatically controlled viscous fan clutch,Special fluid enhances the fan to turn faster..
5.ATTENTION:Please verify the year/make/model of your vehicle and refer to our detailed fitment information on product description page below, if you do not sure, please kindly contact us..

Check Stock