Top Viscosity Index Improver Reviews

Machinery's Handbook Guide: A Guide to Tables, Formulas, & More in the 31st Edition

Linear Algebra, Signal Processing, and Wavelets – A Unified Approach: Python Version (Springer Undergraduate Texts in Mathematics and Technology)

Mobil 1 0W-40, Engine Oil, 1 qt.

• Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C.
• Flash Point: 230 Degrees C Country of Origin (subject to change): United States.

Valvoline, All Fleet Plus, 15W40, 1 Qt

• Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Series: All-Fleet(R) Plus Item: Diesel Engine Oil Dropping Point: Not Specified Size: 1 qt. ISO Viscosity Grade: Not Specified Application: For Automotive Engines Including Turbo Charged, Lighttruck Gasoline Engines Requiring API Service Standards: All Products Meet API And SAE Standards Container Type: Bottle.
• Base: Conventional Temp. Range: - SAE Grade: 15W-40 Color: Clear/Bright Viscosity @ 100C: 15.3 Viscosity @ 40C: 114.9 Pour Point: -30 Degrees C Flash Point: 230 Degrees C Viscosity Index: 139 Country of Origin (subject to change): United States.

AmScope ML-A-1 Microscope Immersion Oil 1 Oz Type A

• Ultra-low viscosity immersion oil for all microscopes, Type A (150 cSt).

Motul 107972 Set of 2 6100 SYN-nergy 5W-30 Motor Oil 5-Liter Bottles

• Advanced Technosynthese lubricant for High Performance/Protection.
• Specifically designed for powerful & recent cars fitted with Gasoline/Diesel engines/naturally aspirated/turbocharged/indirect/direct injection..
• Suitable for all types of fuel: leaded/unleaded Gasoline/Ethanol/LPG/Diesel/Biofuel. // Compatible with catalytic converters..
• Can be mixed with synthetic/mineral oils..
• Viscosity Grade: SAE J 300/5W-30. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/71.2 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/11.8 mm²/s. // Viscosity HTHS at 150°C (302°F): ASTM D4741/3.5 mPa.s. // Viscosity Index: ASTM D2270. // Pour Point: ASTM D97/-38°C/-36°F. // Flash Point: ASTM D92/224°C/435°F. // Sulfated Ash: ASTM D874/1.1% Weight. // TBN: ASTM D2896/10.2 mg KOH/g..

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

• For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
• MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
• Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
• Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
• Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..

Epoxy Adhesive Optically Clear High Impact,Two Part Low Viscosity AA-Bond F113 5gm Pouch

• Spec. Gravity 1.23 g/cc Mixed Viscosity 175 cP At 25°C, Thixotropic Index 1.0.
• Mechanical Properties Hardness, Shore D 86, Pot Life 1.5 hours, Refractive Index 1.51.
• Glass Transition Temp (Tg), ultimate 102°C.
• cure time 24 hrs At 25°C, 1-2 hrs At 65°C.

OEMTOOLS 24399 Vacuum Pump Oil, 8 oz, Hydrotreated, 8oz Vacuum Oil Change Tool Accessory, Widely Compatible for Fluid Pump, Automotive, Electrical, and Mechanical Systems

• Premium: Extremely high quality, hydrotreated vacuum pump oil.
• Engineered to maintain viscosity even in extreme temperatures.
• Essential: Don't damage your equipment with substitute oils.
• Your vacuum extractor depends on regular service and the quality and purity of your vacuum pump oil.
• Clean: Used oil contains contaminants like moisture, acids, vapors, and dirt.
• Vacuum pump oil should be changed after each use to improve performance and the life of the pump.
• Universal: This mechanical lubricant is compatible with pumps made by most manufacturers.
• Specifications: 225 Viscosity SUS at 100 degrees Fahrenheit.

AA-Bond FDA22 FDA Medical Grade Epoxy Adhesive Two Part Room Temp Cure 5gm kit

• Spec. Gravity 1.44 g/cc Mixed Viscosity 27,000 cP After mixing Pot Life 3 hrs solids contents % 100.
• Hardness Shore D 78 Adhesive Bond Strength 2100 psi At 25°C Elong at Yield 5 % Color Light Tan.
• Volume Resistivity 1.50e+14 ohm-cmDielectric Constant 3.5 At 1000 Hz Thixotropic Index 1.4.
• Maxi Service Temp Air 293 °F Min Service Temp Air -76.0 °F CTE linear 26.1 µin/in -°F At Temp 68 °F.
• Thixotropic Index 1.2 Cure Time 1.00 - 4.00 hour At 65°C 24.0 hour At 25°C Pot Life 180 min.

Duragard Arctic Blue Hydraulic Fluid - 5 Gallon Pail

• FULL SYNTHETIC - No compromise formulation, full synthetic with extremely high-performance metrics. EXTREMELY ECONOMICAL - Lowest cost per hour of operation. Period. MULTI-VISC FORMULATION for wide viscosity range applications..
• TRUE ALL-SEASON - Extreme temperature range for arctic cold (-54 F) to hot desert summers. Trouble-free, long duration, flawless hydraulic response, and power transfer..
• 7,000 -10,000 Hour RATING - Minimum 7,000 hour rating and up to 10,000 operational hours in severe service. ZERO FOAMING - Virtually zero foaming in high-stress environments and extremely rapid air release & air separation. Prevents hydraulic cavitation..
• EXTREME THERMAL STABILITY - Highest viscosity index (194) of any commercially available hydraulic oil. Outstanding temperature tolerances and shear stability under high loads. Prevents overheating, blown hoses, over-pressure, and facilitates excellent heat transfer to keep hydraulic systems cool..
• CONTAINS 300% ANTI WEAR BOOST - Exceptionally high ZINC levels and corrosion inhibitors to protect expensive pistons and all types of hydraulic pumps..

Vallejo 71562 Airbrush Flow Improver (200ml)

• READY TO USE AIR BRUSH PAINTS - This Air Brush Paint kit comes with 126 airbrush paints.
• TRANSFORM YOUR WARPAINTS FOR AIRBRUSH – This airbrush flow improver effectively dilutes your paint thinner.
• INNOVATIVE COLOR TRIADS – Choose your triad of airbrush colors for shadow, midtones and highlights.
• ACRYLIC MEDIUM FLOW IMPROVER OF CHOICE- Get maximum coats for Warhammer, Star Wars, and D&D models.
• NON-TOXIC AND ECO FRIENDLY – This paint airbrush paint kit is non-toxic and safe to use.

TRIAX Synthetic OEM Grade Power Steering Fluid, Universal, Arctic Grade -50 Cold Flow, Fits Most Asian, US, and European Cars, Full Synthetic with Esters, Widest Spec Application (1 Quart)

• Meets or exceeds the specifications requirements for most European, Asian, and US vehicles power steering / servo hydraulic steering systems in modern vehicles.
• compatible with all types of seals materials in virtually all power steering systems.
• universal top off and complete fill formula.
• the green color mixes with any color power steering fluid.
• Extremely high viscosity index assures superior control in both exceedingly hot and very cold climates (-50F).
• Exceptional oxidation stability assures the fluid will not thicken or foul up with time.
• very high heat tolerances without losing viscosity and properties.
• contains high-quality elastomers and seal conditioners to maintain seal integrity for at least 150,000 miles.
• contains top tier custom built optimized additive pack.
• protects all metals including servo/power steering pumps from corrosion and rust.
• ultra-rapid aeration and water separation.