Top Via Motherboard Reviews

Thermaltake Level 20 RS Motherboard Sync ARGB ATX Mid Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1P8-00M1WN-00

  • [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans + ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
  • [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
  • [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off.
  • [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
  • [WINDOW PSU COVER] – Special ventilated design enhances airflow and hides unsightly cables.
  • [2+2+1 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Rack + 2 5" x 2 with HDD Bracket + 2 5"/3 5" x 1 behind MB Tray.
  • Supports Mini ITX Micro ATX ATX Motherboard.
  • I/O Port - USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
  • OUTSTANDING EXPANSION - Max CPU Cooler Height 172mm / Max VGA Length 282mm (With Reservoir) 400mm (Without Reservoir) / Max PSU Length 220mm.
  • DIMENSION - 21 8" x 9 5" x 20 6" 27 lbs 3 Year.
Check Stock

Intel Chipset Q270 Socket LGA1151 Desktop Motherboard NW6H5 0NW6H5 CN-0NW6H5 for Dell OptiPlex 7050 Small Form Factor Series

  • **Note: The Dell Motherboard Part Number G3HR7 and the T568R both fit the Dell XPS 8100. They are the same in every aspect with the exception of one thing. The mounting design for the heatsink are different. On the G3HR7 Motherboard the Heatsink mounts via threaded screws, on the T568R the mounting is via plastic tabs that press into the motherboard. One with not fit the other. We have found the correct heatsink for the G3HR7, that is being sold here, is the Dell F2K99..
  • Chipset: Intel H57, Known Supported Processors (and Similar): Socket Type: LGA1156, Intel Core i7-870, Intel Core i7-860, Intel Core i7-750, Intel Core i5-670, Intel Core i5-661, Intel Core i5-660, Intel Core i5-650, Intel Core i3-540, Intel Core i3-530.
  • Supported Memory: Connectors four internally-accessible DDR3 DIMM sockets Capacities 1 GB, 2 GB, and 4 GB Memory type 1066-MHz or 1333-MHz DDR3 DIMM.
  • non-ECC memory only Memory configurations possible 4 GB, 6 GB, 8 GB, 12 GB, and 16 GB (64-bit operating system), Audio: Integrated 7.1 channel, High Definition audio with S/PDIF support.
  • Video: Intel Graphics Media Accelerator HD, Expansion Capabilities: PCI one 124-pin connector, PCI Express x1 two 36-Pin Connectors, PCI Express x16 one 164-Pin Connector.
Check Stock

EZDIY-FAB RGB Dual Ring 120mm Case Fans,5V Motherboard Sync,Speed Adjustable,RGB Sync Fan with 10-Port Fan Hub X and Remote-5 Pack

  • 16 Leds with true RGB with 16.8 million colors to light up your build with nearly endless customizable combinations.
  • 9-fan blade, support speed regulation, adjust brightness, intelligent color matching by wireless remote control..
  • 8 shockproof pads ensure that the fan will not vibrate when it is running..
  • Sync RGB lighting via motherboard:- MUST BE work with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller(Please check the ARGB motherboard of your motherboard before purchase!).
  • With EZDIY-FAB Fan Hub X and 21-key remote:You can instantly adjusting LED back-light effects, colors, brightness and Fan speed.
Check Stock

EZDIY-FAB RGB Dual Ring 120mm Case Fans,5V Motherboard Sync,Speed Adjustable,RGB Sync Fan with 10-Port Fan Hub X and Remote-3 Pack

  • 16 Leds with true RGB with 16.8 million colors to light up your build with nearly endless customizable combinations.
  • 9-fan blade, support speed regulation, adjust brightness, intelligent color matching by wireless remote control..
  • 8 shockproof pads ensure that the fan will not vibrate when it is running..
  • Sync RGB lighting via motherboard:- MUST BE work with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller(Please check the ARGB motherboard of your motherboard before purchase!).
  • With EZDIY-FAB Fan Hub X and 21-key remote:You can instantly adjusting LED back-light effects, colors, brightness and Fan speed.
Check Stock

Gaming PC Case Computer Cases with 6 PCS RGB Fans Mid-Tower Open Computer Tower Case ATX Gaming Case USB2.0 USB3.0 Cooling SystemTempered Glass Panels PC Case

  • [LIGHT UP THE SYSTEM] - 3 Pre-installed 120 millimeter 5V Motherboard Sync ARGB fans (Sync with ASUS, Gigabyte, MSI, ASRock, Biostar that has 5V....
  • [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via the I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
  • [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color) / Radar mode (Red, yellow green Cyan blue White Purple) / Breath mode....
  • [CLEAR VIEW OF PC GAMING] - 4 millimeter thick Tempered Glass Side panel with standard mounting.
  • [FULL LENGTH PSU COVER] – Providing plenty of space to tuck away cables, while keeping airflow clear for your hard drives and PSU.
Check Stock

Thermaltake Toughpower PF1 ARGB 1050W 80+ Platinum 16.8 Million Colors 18 Addressable LEDs 5V Motherboard Sync/Analog Controlled SLI Full Modular Power Supply PS-TPD-1050F3FAPU-1

  • [2-Way RGB control] - Control light via "color" "Mode" Button (7 light modes/8 Colors) or via 5V ARGB Sync motherboard.
  • [15 light modes via color mode button] - Wave/ spiral/ flow/ heartbeat/ ripple/ full lighted (Red, orange, yellow, green, blue, purple, pink, and....
  • [Sync with motherboard RGB software] - controlling lights with as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync and ASROCK polychrome....
  • [Ring Duo 140mm fan] - 16.8 million color 18 addressable LEDs Dual lighting Zones self-lubricated hydraulic Bearing pwn fan for maximizing airflow....
  • [Ultra quiet smart zero fan] - fan works only when PSU working load goes over 40%. a switch At the back of the PSU can be turned off to have the fan....
Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • 【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....
Check Stock

Thermaltake Toughpower PF1 ARGB 1200W 80+ Platinum 16.8 Million Colors 18 Addressable LEDs 5V Motherboard Sync/Analog Controlled SLI Full Modular Power Supply PS-TPD-1200F3FAPU-1

  • [2-Way RGB control] - Control light via "color" "Mode" Button (7 light modes/8 Colors) or via 5V ARGB Sync motherboard.
  • [15 light modes via color mode button] - Wave/ spiral/ flow/ heartbeat/ ripple/ full lighted (Red, orange, yellow, green, blue, purple, pink, and white)/ spectrum mode/ light off.
  • [Sync with motherboard RGB software] - controlling lights with as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync and ASROCK polychrome through motherboards that have a 5V addressable RGB header.
  • [Ring Duo 140mm fan] - 16.8 million color 18 addressable LEDs Dual lighting Zones self-lubricated hydraulic Bearing pwn fan for maximizing airflow while minimizing noise.
  • [Ultra quiet smart zero fan] - fan works only when PSU working load goes over 40%. a switch At the back of the PSU can be turned off to have the fan spun constantly.
  • [Zero cable platform] - daughterboards are directly soldered to the Motherboard for better heat dissipation and impressive output power quality.
  • [Japanese capacitors] - 100% High quality 105°C (221°F) Japanese capacitors offer the highest stability, durability, and reliability.
  • [80+ platinum and Intel C6/C7 States ready] - deliver up to 92% efficiency, PF1 ARGB Series optimized to work with all generations of Intel's processors t....
Check Stock

Thermaltake View 51 Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1Q6-00M1WN-00

  • [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
  • [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via the I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
  • [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color) / Radar mode (Red, yellow green Cyan blue White Purple) / Breath mode (8 Colors) / Full Lighted mode/ Single Color mode (7 Colors) / Light Off.
  • [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
  • [SMART SPACE] – Sophisticated space design at the right side of the case provides a neat area for PSU placement and cable management.
  • [2 plus 2 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Cage plus 2 5" x 2 with HDD Bracket.
  • Supports Mini ITX Micro ATX ATX E-ATX (up to 10 5") Motherboard.
  • I/O Port - Type C x 1 USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
  • OUTSTANDING EXPANSION - Max CPU Cooler Height 175mm / Max VGA Length 300mm (With Reservoir) 440mm (Without Reservoir) / Max PSU Length 200mm.
  • DIMENSION - 21 65" x 12 4" x 20 67" 32 96 l....
Check Stock

Thermaltake View 51 Snow Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1Q6-00M6WN-00, White

  • [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
  • [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
  • [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color)/ Radar mode (Red yellow green Cyan blue White Purple)/ Breath mode (8 Colors)/ Full Lighted mode/ Single Color mode (7 Colors)/ Light Off.
  • [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
  • [SMART SPACE] – Sophisticated space design at the right side of the case provides a neat area for PSU placement and cable management.
  • [2 plus 2 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Cage plus 2 5" x 2 with HDD Bracket.
  • Supports Mini ITX Micro ATX ATX E-ATX (up to 10 5") Motherboard.
  • I/O Port - Type C x 1 USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
  • OUTSTANDING EXPANSION - Max CPU Cooler Height 175mm / Max VGA Length 300mm (With Reservoir) 440mm (Without Reservoir) / Max PSU Length 200mm.
  • DIMENSION - 21 65" x 12 4" x 20 67" 32 96 lbs 3 Year....
Check Stock

Thermaltake V250 Motherboard Sync ARGB ATX Mid-Tower Chassis with 3 120mm 5V Addressable RGB Fan + 1 Black 120mm Rear Fan Pre-Installed CA-1Q5-00M1WN-00

  • [LIGHT UP THE SYSTEM] – 3 Pre-installed 120 millimeter 5V Motherboard Sync ARGB fans (Sync with ASUS, Gigabyte, MSI, ASRock, Biostar that has 5V addressable RGB header).
  • [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] – Control light via the I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
  • [27 LED MODES via I/O PORT] – Wave mode/ Flow mode/ RGB lighting (single color) / Radar mode (Red, yellow green Cyan blue White Purple) / Breath mode (8 Colors) / Full Lighted mode/ Single Color mode (7 Colors) / Light Off.
  • [CLEAR VIEW OF PC GAMING] – 4 millimeter thick Tempered Glass Side panel with standard mounting.
  • [FULL LENGTH PSU COVER] – Providing plenty of space to tuck away cables, while keeping airflow clear for your hard drives and PSU.
Check Stock

Thermaltake View 71 Motherboard Sync ARGB 4-Sided Tempered Glass Vertical GPU Modular E-ATX Gaming Full Tower Computer Case with 3 140mm 5V Motherboard Sync ARGB Fans Pre-installed CA-1I7-00F1WN-03

  • [Light up the system] - 3 pre installed 140 millimeter 5V MB Sync ARGB fans (Sync with Asus, Gigabyte, MSI).
  • [Built-in dual mode 5V ARGB switch board] - Control light via I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard.Material:SPCC.
  • [27 LED modes via I/O port] - Wave mode/ flow mode/ RGB lighting (single color)/ Radar mode (Red, yellow, green, cyan, blue, White, Purple)/ breath....
  • [Sync with motherboard RGB software] - Controlling lights with as US aura Sync, Gigabyte RGB FUSION, MSI Mystic Light Sync and ASROCK polychrome....
  • [Psu cover] – Special ventilated design enhances airflow and hides unsightly cables.
Check Stock