Top Vertical Type Check Valve Reviews

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

BURCAM 401460Z 3/4HP Grinder Pump System With 24 x 24 Sewage Tank

  • COMPLETE SEWAGE GRINDER SYSTEM: Easy to install. Includes 24’’ x 24’’ heavy duty polyethylene basin with top and bottom anti-float collars and non-corrosive cover that is recessed in to protect the lid and bolts during masonry work. 3/4 HP submersible sewage grinder pump (model 400416TZ), 2’’ sewage check valve and aqua-flex seals and gaskets..
  • CONTRACTOR GRADE SEWAGE GRINDER PUMP: High performance for residential sewage applications. Reduces clogging of impeller and jamming situations..
  • HEAVY DUTY CONSTRUCTION: Solid cast iron base and stainless steel motor construction equipped with solid grinder type impeller made of cast iron..
  • GRINDER PUMP PERFORMANCE: Moves up to 4200 gph with a maximum vertical lift of 25 feet..
Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

  • . 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
  • This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.
  • This has the outlet facing the front. Some specific pressure washers may require longer bolts and spacers to mount the pump to your engine. These bolts and spacers are NOT included, but may be purchased at your local hardware store. Common bolt sizes: Two - 5/16" 18 x 2 1/2", ....
Check Stock

SAFELIFE Bike Straight Presta Valve Tire Air Chuck 1 PC, L-Type Schrader Tire Chuck 1 PC for Bicycles, Motorcycles, Medium & Small Cars - 1/4" NPT Open Flow

  • Ready to use tire chuck air tool(2 pack), compatible with any gauge or air compressor using 1/4" NPT threading. L-type：1.34*0.63*1.77 inch.
  • Built to last from solid brass, corrosion-resistant. Presta Valve bicycle air chuck features straight angle to get in between spokes of tires to access valve stem with ease. Schrader Valve car air chuck with 90 degree body easy access to hard-to reach tire valve stems..
  • Straight air chuck engineered for bicycle tires that use Presta valve stem systems - including mountain bikes (MTB) and road bikes. L-type air chuck suitable Schrader valve tires for bicycles, motorcycles, and small and medium-sized vehicles..
  • Open flow technology air flow freely through chuck, no check valve. Perfect for inflating tires by using an attached air compressor, or simply checking pressure and deflating by using a compatible tire pressure gauge..
  • Package includes： 1 PC Presta Valve Tire Air Chuck.
  • 1PC L-type Schrader Valve Tire Air Chuck.
  • A reasonable combination meets your different needs..
Check Stock

Inflatable Boat Air Valve,2PCS Inflatable Boat Spiral Air Plugs One-Way Inflation Replacement Screw for Inflatable Boat

  • 【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable. Please allow a slight deviation for measurement. It is not a general-purpose type. Please check your required size..
  • 【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation..
  • 【Anti-leakage Design】The marine valve has a perfect design, and the valve cover ensures air leakage..
  • 【Fine Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 16mm .Please check size to make sure whether your valve bung fit this plug before purchase..
  • 【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation of your inflatable product by the valve, DO NOT use the product immediately! Leave your inflatable product inflated for 2 hours at least, to test if there is any tiny air leakage. especially for inflatable boats..
  • 【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit for netted ship .Putting an alternate inflatable boat valv....
Check Stock

Hydro Master Plastic Sump Pump Check Valve with Stainless Steel Clamps for 1-1/2 inch or 1-1/4 inch

  • 1-1/2" or 1-1/4" Slip-on check valve for most sump pumps.
  • Made of strong ABS body and EPDM rubber on both ends to prolong service life.
  • Stainless steel 301 clamps and fasteners for corrasion and rust resistance.
  • Can be installed vertical or horizontal, but vertical would be best.
Check Stock

Zoeller 284-0004 Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

  • Pumps up to 4800 gallons per hour,, pumps water up to 25 vertical feet.
  • 1/2 HP Cast Iron Sewage Pump with Vertical Float Switch.
  • 19 in. x 30 in. 30 gallon structural foam basin, 4 In. rubber inlet hub fits DWV schedule 40/80 pip, 2 In. discharge and vent, built-in torque stops.
  • Premium structural foam cover with 8 bolt configuration, air tight molded reusable PVC seal.
  • Check valve features, heavy duty rubber boots, stainless steel clamps, full flow design, 2 in. connections.
Check Stock

SÜA - Oxygen and Acetylene Regulators Welding Gas Gauges -Pair - Rear Entry - LDP series

  • PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators.
  • Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses..
  • READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI.
  • READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI.
  • READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI.
  • READ THIS****: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors..
Check Stock

Watts Tankless Water Heater Service Valve Kit

  • TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
  • SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
  • MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
  • LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
  • WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check Stock

Wilkins 115-975XL2 1.5-Inch Lead Free Reduced Pressure Backflow Preventer

  • Reduced pressure principle backflow preventer consisting of a pressure differential relief valve located between twoindependently operated spring-loaded center guided check valves, “Y” pattern body.
  • Complete with two full port resilient seated ball valves for shut-off and four resilient seated ball valve test cocks.
  • Pre-plumbed backflow station. Assembly can be of the reduced pressure principle or of the double check type.
Check Stock

Little Giant VCMX-20ULS-C 115 Volt, 1/30 HP, 84 GPH, Automatic Condensate Removal Pump, 6-Ft. Power Cord, Safety Switch, Anti-Sweat Sleeve, Blue, 554542

  • APPLICATIONS: ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment.
  • COMES EQUIPPED WITH: external test/run level.
  • galvanized steel "quick install" wall mount bracket.
  • INCLUDES OVERFLOW DETECTION SWITCH: dual function NO and NC operation.
  • shuts off equipment or can be attached to audible or visual alarm or security system.
  • AUTOMATIC OPERATION: vertical centrifugal pump design activates when condensate reaches 2.2 inches.
  • shuts off when condensate falls to 1.6 inches.
  • SPECIFICATIONS: 1/30 HP, 115 Volts, 60 Hz., 1.5 Amps, 93 Watts, 3/8-inch discharge, check valve included, 84 GPH at 1-ft. lift, 21 ft. shut-off, maximum 9.1 PSI.
Check Stock

Leader_Pneumatic Valve Box Cover Lid 6” Round Sprinkler System Irrigation Circular Valve Box Grn,2 Pack

  • 1. 6” valve box cover lid, Green, 2 Packs.
  • 2. The 6" round valve box overlapping covers are made of qulaity plastic.
  • 4. Durable, and easy to install and move from 6" round valve box.
  • 5. Superior strength for commercial and utility applications Warning: Please double check size and type before purchasing.
Check Stock

AIR JORDAN 1 Retro High Og Royal Toe 9

  • Self-Priming up to 12 Vertical Feet [3.7M].
  • Built-In Check Valve (May Vary by Model) to Prevent Back Flow of Fluid.
Check Stock