Top Vertical Pump Manufacturers Reviews

Superior Pump 92911 1/2 HP Cast Iron Primary Sump Pump and Backup Pump Kit , Black

  • Primary pump-pumps up to 4200 gallons per hour, pumps water up to 25 vertical feet.
  • Pre-assembled kit: Primary pump model 92511 cast iron sump pump and 12V DC backup pump.
  • Kit includes 87 decibel alarm, electronic control panel with indicator lights, battery box, mounting hardware, 2 AMP DC charger (12 volt deep cycle battery not included).
  • Vertical float switch on primary and backup pumps.
Check Stock

Chapin International 1979 Industrial Concrete Open Head Sprayer with Filter, 3.5-Gallon, Silver

  • 3.5-Gallon Tri-Poxy tank for durability and a 4-inch wide mouth opening for easy filling and cleaning.
  • Compatible for most professional concrete applications, suitable for homeowners too (check chemical manufacturers instructions).
  • Brass pump, wand, 2 female brass fan nozzles and shut off with lock on feature. Poly holster keeps wand and nozzles secure.
  • Chemical resistant seals and gaskets designed to handle a variety of chemicals (check chemical manufacturers instructions).
  • Unique Tri-Lock seal feature that locks the pump cap tight.
Check Stock

Comet ZWD 4040G Pressure Washer Pump 4 GPM 4000 PSI For 1\ Hollow Shaft Engines (Fully Plumbed with Unloader External Bypass)

  • 2800 psi 2.5 gpm Universal Power Pressure Washer Water Pump 308653052 for Homelite.
  • Specs - Maximum Pressure: 2800 PSI. Maximum Flow: 2.3 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Shaft. 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
  • Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube.
  • This pump mounts vertical and is a rear facing (water inlets/outlets come out of the rear of the engine). Pump needs at least 5.5HP to handle PSI. Pump head can be flipped.
  • This pump may require 1/2" spacers when installed, depending on motor configuration. Spacers are used in the case that the pump arm(s) hits the engine or can't reach the under side of frame such as the engine has a longer shaft. If spacers aren't used when installing, the pump legs will break from stress.
Check Stock

Superior Pump 92572 1/2 HP Thermoplastic Submersible Sump Pump with Vertical Float Switch

  • 1/2 HP Sump pump moves up to 3,300 gallons per hour.
  • pump will lift water up to 25' of vertical height.
  • Vertical float switch to automatically turn the pump on/off.
  • 1-1/2 inch NPT discharge for high capacity pumping.
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested.
Check Stock

Superior Pump 92372 1/3 HP Thermoplastic Submersible Sump Pump with Vertical Float Switch

  • 1/3 HP Sump pump moves up to 2,880 gallons per hour.
  • pump will lift water up to 25' of vertical height.
  • Vertical float switch to automatically turn the pump on/off.
  • 1-1/2 inch NPT discharge for high capacity pumping.
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested.
Check Stock

Superior Pump 92910 12V Battery Back Up Submersible Sump Pump with Vertical Switch

  • 12 Volt Sump pump moves up to 1,380 gallons per hour.
  • pump will lift water up to 25' of vertical height.
  • Vertical float switch to automatically turn the pump on/off.
  • 1-1/4 inch or 1-1/2 inch NPT discharge for high capacity pumping.
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested.
Check Stock

Superior Pump 92341 1/3 HP Cast Iron Submersible Sump Pump with Vertical Float Switch

  • 1/3 HP Sump pump moves up to 2,760 gallons per hour.
  • pump will lift water up to 25' of vertical height.
  • Vertical float switch to automatically turn the pump on/off. Switch on and off point is 6 and 2 inches.
  • 1-1/2 inch NPT discharge for high capacity pumping.
  • Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested.
Check Stock

YAMATIC 7/8\ Shaft Vertical Pressure Washer Pump - Max 3100 PSI @ 2.5 GPM OEM & Replacement Pump for Power Washer Compatible with Honda, Ryobi, Simpson, Craftsman Homelite and More

  • OEM replacement pump for your pressure washer: Fit most 7/8" shaft vertical gas pressure washer engines. Compatible for Craftsman, Subaru, Homelite, Ryobi, Honda, Husky and more. This easy-to-install kit is great for power washers that can support up to 3000 PSI at 2.5 GPM to wash cars, sidewalks, fences, vehicles, and more..
  • Easy start & maintenance-free: This pump pre-fill oil for lifetime, so you never have to change the oil. It is also manufactured from fully die-cast aluminum for good against corrosion. If the pressure washer is not used for a long time, we recommend that you uses a anti-freeze and lubricant formula, for use before extended storage and prior to startup the following season to keep your pump running on full blast..
  • Easy installation: This replacement pump features a threaded M22 connection pressure washer hose outlet, 3/4'' NH garden hose inlet. The standard bolt pattern fits most 7/8'' vertical shaft gas-powered pressure washers. Packet includes a chemical hose with filter, mounting bolts, shaft key, and instruction booklet to get your pressure washer back in life within 10 minutes. (*Fit 7/8'' vertical shaft engines ONLY).
  • A high-quality thermal relief valve is matters: It protects the pump from overheating while in bypa....
Check Stock

4/10 HP Sewage Pump and Basin System

  • New 3/4 HP cast iron submersible sewage grinder pump with vertical float switch.
  • New grinding technology for sewage applications to eliminate solids.
  • High lift capacity of 35 feet with automatic vertical float switch.
  • Recommended for a residential sewage pump application.
  • Reduces clogging of impeller and jamming situations.
Check Stock

PEGGAS New - Premium - Cold Water - Gasoline - Pressure Washer - Power Washer - Replacement - Axial Horizontal Pump 3/4“ Shaft - 2600-2700 PSI 2.3 GPM Aluminum Head -Simpson -Briggs & Stratton- Ryobi

  • ✦ GASOLINE PRESSURE WASHER VERTICAL PUMP ✦✦ PW25/2.3 ✦✦ High quality replacement pump for your pump. These are OEM replacement pumps for many models of pressure washers. If your old one stopped working, is corroded etc. don’t hesitate!.
  • ✦ 2600-2700 PSI 2.3 GPM RATING ✦ This pumps is rated at 2600-2700 PSI and 2.3 GPM which is great for any and all small house cleaning projects. Very safe pressure even for washing your car or other things without being afraid to damage the paint!.
  • ✦ UNIVERSAL FITMENT ✦ This pump comes with a standard 3/4” shaft which is universal for all small pressure washers. Hose connecters are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!.
  • ✦ MOUNTING BOLT MEASUREMENT ✦ Hole Distance to hole – 2 5/8” Outer Holes – 1 7/8″.
  • ✦ PARTS COMPATIBILITY ✦ ✦ THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE, NOT A 7/8″ SHAFT & NOT VERTICAL ENGINE ✦ Models stated in the listing are potential matches only and NOT a guarantee of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)*** Fits Honda Excell units with 3/4″ shaft....
Check Stock

Blue Torrent NWS15DNSBGU 1.5 HP Hurricane 110V Single Speed Dual Port Replacement Pump for Above Ground Swimming Pools

  • REPLACEMENT POOL PUMP: Blue Torrent Hurricane Pool Pump is compatible with sand, DE, or cartridge filters.
  • ABOVE GROUND POOLS: Replacement pump for above ground pools features a quiet motor.
  • POWERFUL MOTOR: 1.50 HP motor provides efficient filtration and features a dual-port on-off switch.
  • EASY INSTALLATION PROCESS: Wire with standard 110V plug for an easy installation process.
  • HORIZONTAL OR VERTICAL: Features standard plug or twist-lock plug for horizontal or vertical orientation.
Check Stock

Chapin 19149 Concrete Sprayer, Red

  • 3.5-Gallon Tri-Poxy tank for durability and a 4-inch wide mouth opening for easy filling and cleaning.
  • Compatible for most professional concrete applications, suitable for homeowners too (check chemical manufacturers instructions).
  • Professional dripless shut off with Comfort Grip lock on/off feature, brass wand and nozzle.
  • Chemical Resistant seals and gaskets designed to handle a variety of chemicals (check chemical manufacturers instructions).
  • Unique Tri-Lock seal feature that locks the pump cap tight.
Check Stock

Engine Oil Pump

  • Melling has added this oil pump that address oiling issues frequently found in Ford 4-valve engines. The M360HV high volume oil pump provides 20% additional oil flow to assist in increasing the engines oil pressure by filling the additional clearances created by wear. As a result the pumps exceed original equipment manufacturers specifications to meet the demanding lubrication needs of those engines..
  • The pump has been designed by Melling engineering as drop-in replacement to the original equipment oil pump. No modifications to the engine, pickup tube assembly or other components are required. All the features that make our stock replacement M360 oil pumps perform so well have been utilized in the new high volume pumps this includes the coated cast iron cover plates..
  • In comparison the M360HV is a 20% higher volume version of the M360 stock replacement oil pump. In addition, the M360HV pumps have a 20 psi higher pressure relief setting/.
  • Every pump is performance tested after it is machined, cleaned, and assembled at our Jackson, MI facility. Melling is global supplier of engine parts and is ISO/TS 16949 and ISO 14001 certified..
Check Stock