Top Variable Attenuators Reviews

Anaren Attenuators 3.0GHz Attn 30dB 10 Watts VSWR 1.25:1 - Pack of 10 (D10AA30Z4)

- Use in coaxial cable feeds to reduce signal levels..
- Fixes the problem of having too much signal strength..
- Combinations of attenuators may be used together to create the exact signal loss needed.

Have a filter (can be turn on/off ) to suit the output of sine and pulse wave..
Due to the high precision and stable frequency of the DDS, it is also very suitable for the oscilloscope's scan time calibration factor..
The main output waveform are sine and square‑wave, triangular wave, sawtooth wave..
Small size, multiple functions, simple operation, easy to carry..
The square output is also suitable for oscilloscope attenuators and probe pulse adjustment..

Due to the high precision and stable frequency of the DDS, it is also very suitable for the oscilloscope's scan time calibration factor..
The square wave output is also suitable for oscilloscope attenuators and probe pulse adjustment..
The main output waveform are sine wave and squarewave, triangular wave, sawtooth wave..
Have a filter (can be turn on/off ) to suit the output of sine wave and pulse wave..
Small size, multiple functions, simple operation, easy to carry..

Battery-Free Passive 2-Channel Micro-Mixer for Powered Microphones, Wireless Microphone Receivers and other Audio Sources.
Two 3.5mm TRS Inputs to a single 3.5mm TRS Output with selectable Mono/Stereo output and two input level attenuators to control the audio mix.
Includes both TRS and TRRS Output Cables for use with Cameras, Smartphones, Tablets, Computers, Recorders and much more.
Incredibly Compact and Lightweight, it easily fits into even the tightest set-ups and smallest rigs and has a standard 1/4″-20 mount.
Ideal Mixer for Micro Wireless Systems and Battery-Powered shotgun mics like the Blink 500, Blink 500 Pro, CamMic+, Vmic mkII series and more.

A convenient package of 6 different 50Ω SMA in-line attenuators.
Includes values of 1dB, 2dB, 3dB, 6dB, 10dB and 20dB, which allows for selective attenuation of anywhere between 1dB-42dB in 1dB increments!.
Fantastic accuracy of / - 0.1dB through to 3GHz.
The values are laser-etched to ensure longevity of the labeling for the life of the devices.
Full 2 year warranty direct through Nooelec.

Front / Rear / Sub Input, Front / Rear / Sub Outputs, Remote Subwoofer Control.
Front High Pass Filter 65Hz to 4.5 kHz, Rear High Pass Filter 65Hz to 4.5 kHz.
Variable Subwoofer Filter 40 Hz – 4200 Hz, Variable High Pass Filter 65 Hz – 4.5 kHz.
Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees.
Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz.

Front / Rear / Sub Input, Front / Rear / Sub Outputs.
Front High Pass Filter 65 Hz to 4.5 kHz, Rear High Pass Filter 45 Hz to 1.6 kHz.
Variable Subwoofer Filter 40 Hz – 250 Hz, Variable High Pass Filter 45 Hz – 5 kHz.
Crossover Slope 12 dB / Octave, Variable Subwoofer Phase 0 – 180 Degrees.
Variable Bass Boost 0 – 18 dB, Variable Bass Boost Frequency 25 Hz – 250 Hz.

Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.

65 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms) | 200 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode).
Front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) | Variable low-pass filter (50-5,000 Hz, 24 dB/octave) | Bandpass filter engages both.
Variable bass boost (0-18 dB at 45 Hz) on front and rear channels.
Dimensions: 10-15/16″W x 2-1/4″H x 8-1/4″D.

【Preuime Material】Made by TPU material , stain resistant not easy to stain, easily for carrying and cleaning..
【Convenient】Directly install on filter , no need to screw on it, take off it fast, protecting lens filter from all round..
【Scratch Resistant & Anti-Fall 】Soft TPU materail, more professional on anti-fall, harmless for filter frame and filter glass..
【Application】This filter lens cap only fit K&F Concept variable nd filter, couldn't compatible other brands variable nd filter..
【Note】This filter cap ONLY suitable for variable nd filter , couldn't be used on cpl+nd multifuctional filter, uv filter, cpl filter, fixed nd filter, black diffusion filter, magnetic filter and lens directly, before order the filter cap , please confirm your variable nd fitler size, 82mm filter cap only fit 82mm variable nd..

Variable 2-speed 1/2" Hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque.
Variable speed Impact Driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of Max Torque.
Variable speed Recipro Saw delivers 0-2,800 strokes per minute with a 1-1/4" stroke.
Makita XT505 18V LXT Lithium-Ion Cordless 5-Pc. Combo Kit (3.0Ah).