Top Valve For Gas Reviews

HZR Copper Ball Valve Internal Water Pipe Equipment Accessory

  • Hand tightening provides reducing the risk of leakage and self-locking type design, more convenient for you to use..
  • Brass for corrosion resistance, ductility at high temperatures, and low permeability and valve requires no special tools ..
  • Working medium: natural gas, liquefied petroleum gas, and each valve individually tested for maximum safety..
  • It was widely used in irrigation systems, pipeline systems, oil and gas supply systems with different size and colours..
  • Copper ball valve thick brass inner wire for tap water switch, water valve and water pipe valve..
Check Stock

Robertshaw 710-502 Low Profile mV Gas Valve

  • Gas Valve Replacement: When you need to replace your B-67 gas valve, this compact, low-profile control designed for low capacity space heater applications fills the void where room is limited.
  • Versatility: With an electrical rating range from 250 mV to 750 mV, this gas valve suits various gas types, including natural, manufactured, mixed, liquefied petroleum and LP gas/air mixtures.
  • Features: RoHS-compliant 710-502 unit is equipped with three-position 1/2-inch outlets, 1/4-inch pilot outlet tubing, standard NEMA terminals, gas cock dial with off-pilot-on markings and an inlet filtered screen.
  • Quality Warmth: Robertshaw makes reliable controls and replacement parts for furnaces, water heaters, burners and boilers, including thermostats, switches, ignitor and heat pump controls, gas valves, and more.
  • Capability Sets Us Apart: Robertshaw is a global design, engineering and manufacturing company that sells product solutions and makes more than 10,000 sophisticated controls for commercial and home appliances.
Check Stock

700-506 Gas Valve, Fast Opening, 200000 BTU\\/H, Combination Gas Valve, Widely used in natural, manufactured, mixed, LPG and LPG\\/air mixtures

  • The 700-506 series gas valve is designed for intermittent pilot, direct spark and hot surface applications.Small size, large flow，Contains a manual valve, pilot valve and a main air pressure regulator..
  • Just make sure the valve you use has the btu rating range within 5% of the original. Also some are labeled at different water column but as long as it is very close range the 700-506 gas valve will work..
  • Compatible with various gas types: natural, manufactured, blends, LPG and LPG/air mixtures..
  • The 700-506 thermostat gas valve is suitable for many residential and commercial places, and is widely used in wall-mounted heaters, boilers, portable domestic stoves and central heating equipment..
  • Thank you for purchasing our products, we provide the best service while providing quality products, if you have any questions, please feel free to contact us and give us valuable suggestions..
Check Stock

Hearth Products Controls Dexin 6003 Series Replacement Millivolt Valve (200-D), Natural Gas

  • Replacement millivolt gas valve for gas appliance.
Check Stock

Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit, with Thermocouple Knob Switch with 5/8''-18UNF Flare Inlet & Outlet Replacement for Gas Grill Heater Fire Pit

  • WIDE COMPATIBILITY --- The propane lpg gas fire pit control safety valve kit is suitable for gas grill, heater, fire pit, fireplace if same connections. IT'S LOW PRESSURE PROPANE ONLY..
  • EASY INSTALLATION --- This low pressure LPG propane gas fireplace fire pit flame failure safety control valve kit is easy to install, install vertically at the opening of the device container..
  • PREMIUM QUALITY --- The fire pit gas control valve kit are made of high quality brass material with heavy-duty construction for durable use..
  • DEMENSION --- Flame failure valve with inlet and outlet with Flare thread 5/8’’-18UNF, 750mm thermocouple with M8*1 threaded head..
  • 1 YEAR WARRANTY --- This gas fire pit control valve replacement parts complete with 1-Year limited warranty, should be there any question, please feel free to contact us..
Check Stock

K Thermocouple Terminal block Ceramic Insulator Kiln Temperature Sensor

  • ➤ 【SIZE】— Thermal coupler total length 900mm, with five nuts gas parts thermocouple gas valve for gas..
  • ➤ 【SAFETY】— Works with solenoid valve to prevent accidents happening, once gas leakage and gas burn out appears, it can put out..
  • ➤ 【APPICATION】— The fireplace thermocouple suitable for induction cooker, gas stove, heating device and other burning appliances..
  • ➤ 【FUNCTION】— Very simple and convenient to use. The gas fireplace thermocouple is designed for temperature sensing and measurement..
  • ➤ 【SERVICE】—If you have any questions about quality and instructions during use, we will be happy to assist you..
Check Stock

Welding Torch Fueled By 20 lb Propane With Type 1 Valve, OPD Valve

  • HEIGH TEMPERATURE RESISTANCE| Stainless steel head has a heigher melting point than brass, it is more reliable.
  • MONEY-SAVER | It use propane tank with OPD valve, this gas is cheaper than MAPP gas..
Check Stock

Honeywell International VR8200A2132 Valve

  • Includes: One 1/2″ x 3/8″ straight busing, one 3/4″ straighr flange, one hex wrench, one pilot compressing fitting for 1/4″ O.D. tubing, 393691 Natural to LP gas conversion kit.
  • Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
  • Solenoid-operated first automatic valve opens on thermostat call for heat.
  • Diaphragm-operated second automatic valve opens under control of regulator.
  • closes if gas or power supply is interrupted.
Check Stock

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • INCLUDES EVERYTHING FOR INSTALLATION - This Gas Appliances Installation Kit Includes 22” flexible gas line (with 1/2" Female Flare on both end) , 3 different adapters (1/2" Male Flare x 1/2" Male Pipe, 1/2" Male Flare x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
  • HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
Check Stock

Mr. Heater F271239 One-Stop Universal Gas-Appliance Hook-Up Kit,Small

  • 5-piece universal gas-appliance hook-up kit.
  • Comes with everything needed for installing most gas appliances.
  • Includes 18-inch flexible gas line, 3 different couplings and on/off valve.
  • On/off valve provides easy servicing of appliances or summer shutdown.
  • Solid brass fittings. One Stop Universal Gas Appliance Hook Up Kit has everything needed for installation and can be used with gas logs, unvented wall mount heaters, gas stoves, and garage heaters.
Check Stock

Kenmore 9007884 Water Heater Gas Valve and Temperature Control Assembly Genuine Original Equipment Manufacturer OEM Part

  • This part is compatible with models including.
  • 153331620,153331840,153331830,153331651,153331882,153332421,153331630,153579510,153331682,153331661.
  • Gas valve and temperature control assembly 9007884 supplies the burner with fuel to heat the water.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Kenmore.
  • This gas valve and temperature control assembly (part number 9007884) is for water heaters.
  • The temperature control thermostat controls the gas valve.
Check Stock

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

  • ...heat roofing materials, and preheat metals for welding and soldering.
  • The lengthy torch and hose allow you to work safely and easily in hard to reach areas.
  • [Easy to Use]: Connect the blow torch and hose to the other end of the hose to a gas tank.
  • After ensuring all connections are sealed, slowly loosen the gas tank valve and check for leaks.
  • Slightly loosen the blow torch flow valve and ignite directly at the nozzle, adjust the blow torch flow valve to reach the desired temperature.
  • Fire will extinguish naturally to remove gases from torch and hose.
  • [Built to Last]: Constructed of stainless steel, these weed burners are resistant to rust and corrosion.
  • The torch features a steel jet nozzle and a durable adjusting valve to control the flame size and temperature.
  • This kit also includes a natural rubber 5-meter hose that has a 300 PSI rating and is explosion proof.
  • Designed for use with 20 lb. propane tanks.
  • [Contents]: This propane torch weed burner kit includes (1) 33.5-inch (85.1 cm) Heat Gun with turbo blast trigger handle, flow valve knob, and jet nozzle torch tip, and (1) 15-foot (5 meters) gas torch hose.
  • The natural rubber hose weighs 1.8 lbs. (.8 kg) and is classified as “Cla....
Check Stock

Kenmore 9007885 Water Heater Gas Control Valve Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including.
  • 1533311402,153331861,153331150,153579500,153579410.
  • Gas control valve 9007885 controls gas flow to the burner and is controlled by the thermostat.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Kenmore.
  • This gas control valve (part number 9007885) is for water heaters.
  • A service technician is recommended for this repair because the gas supply line connections must be checked for leaks after the repair.
Check Stock