Top V6 Pulley Reviews

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

SCITOO Alternator 13639 fit for Infiniti I30 1998-2000 for I35 2002-2004 For Nissan Maxima Murano 1995-2003 For Murano 2003-2007 AHI0104 IR/IF 110A

  • BENIFIT - Alternators with longer life,resist heat and moisture, protect alternators from excessive charging or failure due to shorts in your cars wiring that can cause spikes or open circuits.
  • REPLACEMENT - AHI0104 LR1110-710C LR1110-710F 400-44021 13826 23100-2Y900 ALT-3212 A204-4032R ALT-3212 1-2382-01HI.
  • COMPABILITY WITH - Alternator for Infiniti I30 1998-2000 V6 3.0L I35 2002-2004 V6 3.5L Nissan Maxima 1995-2000 V6 3.0L 2002-2003 V6 3.5L Murano 2003-2007 V6 3.5L.
  • SPECIFICATION - Part Type: UNIT, Voltage: 12, Rotation: CW, Amperage: 110, Pulley Class:S6, Regulator: IR.
  • Brief: For MAXIMA INFINITI I30 2000, 6-GROOVE PULLEY, 63mm OD.
  • CYCLING - New Alternator high Output are computer for voltage stability, terminal function, and circuit board integrity.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

NICHEFLAG 532173436 Pulley Compatible with Husqvarna AYP Craftsman Poulan 129861 173436 177865 532129861 532173436 532153535 21546127 539112171 583681201, 153535 Craftsman Pulley

  • Fits: RANGE SPORT 5.0L SC V8 & 3.0L SC V6 3.0L V6 DIESEL RANGE 5.0L SC & NA V8 3.0L SC V6 3.0L V6 DIESEL.
Check Stock

A-Premium Alternator Compatible with Nissan Altima 2007-2010, Murano 2009-2014, Maxima 2009-2010, Quest 2011-2017, V6 3.5L, 12V 130Amp CW 7-Groove Pulley, Replace# A003TJ1791, 23100-1AA1A

  • [Vehicle Fitment]: Compatible with Nissan Altima 2007-2010 V6 3.5L, Murano 2009-2014 V6 3.5L, Maxima 2009-2010 V6 3.5L, Quest 2011-2017 V6 3.5L, DOHC.
  • [Reference Number]: 11341N, 11341, A3TJ1791, A003TJ1791, A003TJ1791A, A003TJ1791B, 23100-1AA1A, 23100-1AA1B, 23100-JA11B, 231001AA1A, 231001AA1B, 23100JA11B.
  • [Quality Construction]: A-Premium Alternator is made from 100% new components, which can withstand the harshest environments for maximum performance and longevity and provide electricity to the car and recharge the battery..
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this alternator is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • FITMENT: Harmonic Damper Pulley Holder works on Toyota 3.4L V6 Tacoma 1996-2004, 4 Runner 1996-2002, Tundra 2000-2004, T100 pickup 1996-1998.
  • Cam Pulley Holder fits many Camry, Toyota, Nissan, Mazda, OHC and many others ( please kindly check the size before purchase ).
  • HIGH QUALITY: This tool kit is constructed from high quality 40Cr steel to provide enough strength and durability.
  • and the powder coating is resistant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pull....
Check Stock

SCITOO Alternator 9764219-124 Fit for Honda Pilot 2012 2013 2014 2015 For Honda Odyssey 2011 2012 2013

  • COMPABILITY - Alternator for Honda Pilot V6 3.5L 2012-2015 for Honda Ridgeline V6 3.5L 2012-2014 for Honda Odyssey V6 3.5L 2011-2013.
  • SPECIFICATION - 130 Amp/12 Volt, CW, 6-Groove Decoupler Pulley, DENSO IR/IF.
  • REPLACEMENT - 104210-1240, 9764219-124, 31100-RV0-A01, CSJ24, 11573, 290-5582.
  • COMPONENTS - Longer life of the alternator through the use of premium brushes and other critical.
  • TEST - Rigorous and accelerated cycling tests to ensure product service, quality and durability.
Check Stock

Lisle 54810 Master Harmonic Balancer Puller Kit

  • The kit Includes a standard Harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a Harmonic damper pulley puller for Chrysler, GM, Mitsubishi, and Dodge.
  • Includes new interchangeable puller jaws for 3.6L V6 Chevrolet Camaro and Dodge 5.7L Hemi.
Check Stock

INEEDUP Car Alternator Fit for Nissan Murano 2004-2007 V6 3.5L 3498cc AHI0104 LR1110-710C 13826

  • APPLICABLE VEHICLES --- For Infiniti I30 1998-1999 V6 3.0L, For Infiniti I30 2000 V6 3.0L, For Infiniti I35 2002-2004 V6 3.5L, For Nissan Maxima....
  • PART NUMBER --- AHI0104, LR1110-710C, LR1110-710F, 400-44021, 13826, 23100-2Y900, ALT-3212, A204-4032R, ALT-3212, 1-2382-01HI.
  • PRODUCT INFORMATION --- 110 Amp/12 Volt, CW, 6-Groove Pulley,Hitachi IR/IF,INEEDUP supplies the automotive aftermarket with high-quality products.
  • SUPERIOR PERFORMANCE --- Good-quality, high-amp INEEDUP alternator can help you gain horsepower.
  • NOTE --- Make sure your vehicle matches the accessory description and compare your part to the listed image to see that our image is actual.
Check Stock

LE-JX Harmonic Damper Pulley Holding Tool Crankshaft Crank Holder Removal Wrench Tool Compatible with Toyota and Lexus

  • Fitment - Compatible with engine model: (Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8) or (4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004....
  • Function - Easy to install or remove crank bolts on Lexus and Toyota engines..
  • How to Use - Used with an inch drive impact wrench and a 22 mm impact sleeve to unscrew the crank bolt. When installing the pulley, you need to bolt....
  • Material - Made of steel with high quality,resisting rust and impact..
  • Great Service Support - Our offer comprehensive pre-sales and after-sales service for this tools.If you have any questions,please contact us right....
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Power Steering Pump Assembly Compatible with Ford Edge 2007-2010 Fusion 2010-2012 Lincoln MKZ 2007-2012

  • YHTAUTO Affordable and Prime Power Steering Pump, Directly Fit.
  • Fits Ford Fusion 2010-2012 Sedan, Edge 2007-2010 Sport Utility.
  • Power Steering Pump Outlet Attachment Type: Threaded.
  • Reference Number: 7H6Z3A696A, 7T4Z3A696A, 8T433A696AA, 9T433A696AA, 9T4Z3A696A, 20-1401.
Check Stock