Top Usb Z Wave Controller Reviews

GoControl WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

  • Z-wave & Manual Control For Connected Lights.
  • White.This device requires a neutral connection.
  • Easily replace existing standard switch to add a Z-Wave controlled lighting dimmer. Compatible with any Z-Wave certified gateway.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Compatible with incandescent and most dimmable fluorescent, halogen, Xenon and LED fixtures and The wires are pre-cut for easy stripping..
Check Stock

Nortek GoControl WD500Z5-1: Z-Wave Wall Dimmer Switch 500W 908.42 MHz 120VAC 15A

  • ...able Trim Ring The WD500Z5-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory. Auto-Sense: Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status..
  • Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles) Signal (Frequency): 908.42 MHz Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Input: 120v 15A 60Hz.
  • Network wide inclusion Scene: Command class Security beaming Requires a Neutral Auto-Sense feature built-in Replaceable trim ring design.
  • Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Nortek Security & Control products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices. Please refer to the linked Technical Bulletin on Z-Wave 3-Way Light Switch Setup for more information..
Check Stock

EATON RF9642-ZDRB Z-Wave Plus Accessory Dimmer, Oil-Rubbed Bronze

  • Wireless accessory for Eaton’s Z-Wave Plus Universal Smart Dimmer (RF9640-N).
  • Ideal for applications where no traveler wires exist for 3-Way & multi-location control.
  • Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
  • Can be associated with (5) other Z-Wave Plus devices when used with a compatible Z-Wave controller.
Check Stock

Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More

  • ...t your whole Z-Wave network while keeping it protected with AES signal encryption..
  • POWERFUL CONTROL: Monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports (your Z-Wave hub needs to support this feature). NOTE: It is NOT a power outage monitor! Quick status reports to the controller and on/off state recovery after power failure..
  • POWERFUL HARDWARE: Made from high-quality components that will last, even when it's very cold or very hot (14 - 104F, indoor use only). ETL certified: complies with North American electrical safety standards. Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle..
  • COMPATIBILITY: Use the Power Switch with any certified Z-Wave gateway for simple on/off control (Wink, Z-Wave alarm panels). Advanced settings and energy monitoring available for open systems only, including Vera, SmartThings (custom device handler required, contact seller first), HomeSeer, and Fibaro Home Center Lite..
Check Stock

Honeywell YTH8320ZW1007/U Z-Wave Enabled Programmable Thermostat

  • Please refer Page 18 and 19 of User manual for troubleshooting steps.
  • Z-Wave delivered messages allows the thermostat to be added to or removed from a Z-Wave controller.Wire saver allows for use without a common wire..
  • Intuitive adjustment for precise comfort control, easy to use touch screen display and extra large backlit display with natural language.
  • Menu Driven programming guides the user through the programming process only showing necessary information and choices on each screen.
  • Thermostat operating message feature sends a message containing the status of the HVAC equipment.
  • The YTH8320ZW1007 includes the TH8320ZW1000 thermostat plus the THP9045A1023 wiresaver module..
  • This thermostat only connects to a z-wave communicating system (not Wi-Fi). Z-Wave delivered messages allows the thermostat to be added to or removed from a Z-Wave controller. The THP9045A1023 wiresaver module must be used when there is no “C” or common wire. A common wire is required to power the thermostat.
  • Menu Driven programming guides the user through the programming ....
Check Stock

Honeywell Ademco TUXWIFIW Tuxedo Touch Controller w/ Wi-Fi, White (6280i) 7" Screen

  • 7″ color widescreen display, 800 x 480 resolution TFT display with 16 million colors.
  • Centralized control of security system, video cameras, Z-Wave enabled thermostats, lights, locks and more from your Tuxedo Touch. Use either Wi-Fi or Ethernet to connect to the premises LAN. View up to four IP cameras at once on the Tuxedo Touch display..
  • Z-Wave controller built-in Supports up to 232 Z-Wave devicesMost Z-Wave enabled thermostats, locks, lights and shades are compatible (see compatibility charts).
Check Stock

EATON RF9617DW Z-Wave Plus Accessory Switch, White

  • Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
  • Must be used with Z-Wave Plus Master Switch (RF9601).
  • 3-Way control when used with Master Switch (RF9601).
Check Stock

GoControl Z-Wave Wall Dimmer Switch, 1000W - WD1000Z-1

  • Wireless 1,000W z-wave wall dimmer switch offers both z-wave & manual control for connected lights.
  • Linear-only Auto sense feature allows for Local lamp activation Independent of the z-wave controller status.
Check Stock

Qubino Z-Wave Plus Smart On/Off Thermostat 2 ZMNKID3 (Z-Wave Hub Required)

  • UNIQUE Z-WAVE: The Stelpro KI is the first Z-Wave thermostat in North America to work with line voltage, with a 2-wire connection to the heater..
  • EFFICIENT HEATING: Remotely control your baseboard and convector heaters from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately)..
  • SAVE SMART: Set your own temperature schedules to reduce energy bills with minimal effort.
  • take advantage of the device's ECO mode, designed to be as energy-efficient as possible..
  • ELEVATED CLIMATE CONTROL: Create advanced automations by pairing the Stelpro KI with other Z-Wave devices. Trigger the heating on/off with a door/window sensor, temperature sensor, motion sensor, etc..
  • CERTIFIED QUALITY: This thermostat is Z-Wave Plus and UL certified. Made in Canada. Works with SmartThings, Vera, HomeSeer, Nexia and Wink..
Check Stock

EATON RF9601DW Z-Wave Plus Wireless Switch, White

  • Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
  • 3-Way control when used with Accessory Switch (RF9642).
  • Can be associated with up to 5 other Z-Wave Plus devices.
  • Dimmable blue LED at center right of paddle illuminates to indicate ON/OFF status.
Check Stock

EATON RF9640-NWS Z-Wave Plus Universal Dimmer, White Satin

  • Replaces standard switch to add local and wireless control.
  • Compatible with most common residential lighting loads including LED, CFL, INC, MLV, ELV, HAL.
  • Single pole and 3-Way control: Use with Z-Wave Plus Accessory dimmer RF9642-Z.
  • Features 7 step blue load indicating LED light that can be dimmed in ON or OFF state.
  • Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
  • Voice and app-based control when used with compatible Z-Wave controller.
Check Stock

Zwave Door Sensor Aeotec Recessed Door Sensor 7, Z-Wave Plus Enabled Smart Door Sensor Battery Powered, SmartStart S2, Zwave Hub Required SmartThings Fibaro Home Centre 3 Hubitat

  • ...xity of installation, with a quick app scan of its QR code, drastically shortening and simplifying the product setup process for you. Smart door open sensor.
  • Safer than the previous z-wave recessed sensor. Come with z wave security 2 (S2) framework which is the most advanced security for smart home zwave devices and controllers, z-wave gateway and zwave hub in the market today, it’s better to protect your family.
  • Anytime and anywhere, it’s great wireless door sensors for security. Smart hubs compatible with z-wave hub Samsung SmartThings, Wink, HomeSeer HS3, Hubitat, ISY994i, Open Z-Wave, Domoticz and more. Frequency: 908.40 MHz, 916.00 MHz.
  • Take your home under zwave controller. Open close sensor zwave Optimized to use up to 66% less battery power to communicate than previous generations. 3 year+ battery life powered by 1 x 1/2 AA battery. Battery included. Never worry about missing any important moment or running out of battery.
Check Stock

Aeotec TriSensor, Z-Wave Plus S2 Enabled Zwave Motion Sensor, Temperature, Light Sensor, Work with Zwave Hub Smartthings 3-in 1 Security System, Battery Powered

  • 3-in 1 Motion, Temperature, Light sensor. Motion sensor accurate to 23 feet, TriSensor also detects temperature -10~50°C / 14~122°C with accracy of ±1°C, 0~30000 LUX with ±3% accracy..
  • Wireless and Cordless. Powered by 1 x CR123A battery, estimated battery life: 1 Year. Battery not packed with the box..
  • Adjustable calibration. Craft your own smart home with 3 levels of detecting calibration..
  • Compatible with certified Z-Wave gateways including: Samsung SmartThings, Vera, Zipabox, Open Z-Wave, Homeseer HS3, Domoticz, Isy994i ZW universal controller and more..
  • Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-18056128..
Check Stock