Top Usb To Rs23ttl Converter Reviews

Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control

BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory..
When you use it for Raspberry Pi, there is no driver needed but you need to install software.
The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place..
Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click “Ask a question” to em-ail us.

Check Stock

DTECH USB to RS422 RS485 Serial Port Converter Adapter Cable with FTDI Chip Supports Windows 11 10 8 7 XP Mac -1.5 Feet

USB to RS485/RS422 converter It easily lets you connect RS485 or RS422 device directly to your Laptop PC computer USB port (built with LED....
USB to RS485 cable adapter is Ideal for industrial environment -provides 600w surge protection and 15KV ESD isolated protection on signal pins to....
rs485 serial to usb converter is with high performance quality processor chip (FTDI-chipset FT232) and I/O auto conversion circuitry which makes RS....
1.5 ft serial RS-422 RS-485 to USB adapter cable supports windows 11 10 8 7, Mac and more.
There are no IRQ and COM port conflicts, since the port do not require any additional IRQ, DMA, memory as resources on the system.

Check Stock

USB to TTL Adapter USB to Serial Converter for Development Projects - Featuring Genuine FTDI USB UART IC ‘FT232RL’

Built-in a new and original FTDI IC device ‘FT232RL’, which handles all the USB signalling and protocols. TTL levels of +5V and +3.3V adjustable....
Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND connections.
POW(power), RXD/TXD transceiver communication LED indicator....
Windows 8 and newer OS, Linux and Mac OS will install FTDI driver automatically, except Chrome OS. For details of OS compatibility and installation....
Typical applications: USB to RS232/RS422/RS485 converters, Support EEPROM, Vendor ID re-write, unbrick routers and Mprog3.5, interface to GPS modules,....
You will get: 1 x Moyina USB to TTL Module + 1 x Jumper + 10 x Dupont Cables (7.9”, female to female), which are packed by antistatic bag. We offer....

Check Stock

WITMOTION USB-UART 6-in-1 USB to Serial Converter Multifunctional USB to TTL/RS485/232 TTL-RS232/485 232 to 485 Universal Adapter Module with CP2102 Compatible with Windows 7/8/10,Linux Arduino

【 Multi-functional】6-in-1 Multifunctional Serial adapter supports USB-TTL, USB-RS232, USB-RS485, TTL-232, TTL-485, 232-485 converting function,....
【 Superior Compatibility】USB specification 2.0 is compatible with Windows XP/7/8/10 32bits/ 64bits, Linux, Wince, Mac, Vista, etc..
【 Robust Design 】Equipped with superior-quality mode switch(endurable), a status indicating LED(easy to connect), upgraded TO5 fuse (excellent....
【 Worry-free Support 】12-month warranty, lifetime friendly customer service by WitMotion team. Option 1. The tutorial link is printed on the....
【 What You Get 】1x WitMotion 6-in-1 serial adapter + 4x Dupont cables + 1x Welcome card, well-packed by an antistatic bag.

Check Stock

2Pack PL2303 PL2303HX USB to TTL Serial Adapter 3.3V Debug Cable USB to RS232 TTL Converter 4 Pin Female Socket Download Cable PL2303HX Cable

Specific Interface A: USB 2.0 type A Male Port.
Interface B: 4 pin Female Socket flying leads. Prolific chipset on the PCB board....
USB to TTL serial cable 3.3V (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND(ground), RX and TX at....
TTL to USB Converter Support Windows XP/Vista/7/8.
Ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash....
Application:PL2303 USB to TTL serial adapter is designed to be used for USB to TTL electronic projects, easy to connects devices with 3.3 V logic....
Note: 3.3V and 5.0V output is set (this is the power supply to the microcontroller, upgrade machines do not need the small plate) unplugged from the....

Check Stock

USB to RS232/RS485/TTL Industrial Isolated Converter with Original FT232RL Inside,ADI magnetical Isolation TVS diode,Industrial Equipment for high Communication Requirements or Applications

Support USB to RS232, USB to RS485, USB to TTL (UART) communication.
ADI board integrally coupled magnetically isolated, a signal can be isolated, high reliability, strong anti-interference, low power consumption.
High-quality USB-B and RS232 interface materials, smooth plugging and unplugging, firm and reliable.
Original FT232RL, high-speed communication is stable, reliable, and compatible.
Onboard TVS (transient voltage suppression tube), can effectively suppress the surge voltage and transient spike voltage in the circuit, lightning....

Check Stock

USB to TTL Serial 3.3V UART Converter Cable with FTDI Chip Terminated by 6 Way Header Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More

Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB....
Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5.
Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved.
Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in....
The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold....

Check Stock

TRENDnet USB to Serial 9-Pin Converter Cable, Connect a RS-232 Serial Device to a USB 2.0 Port, Supports Windows & Mac, USB 1.1, USB 2.0, USB 3.0, 21 Inch Cable Length, Plug & Play, White, TU-S9

USB: The USB to serial adapter supports USB 1.1 and it is compatible with USB 2.0 and USB 3.0 ports..
RS-232 SERIAL CONNECTOR: Connect RS-232 serial devices, such as modems or printers, using the widely supported USB standard found in most laptops and desktops today..
SUPPORTED OPERATING SYSTEMS: The USB to serial converter adapter is compatible with Windows and Mac operating systems. Windows 10, 8.1, 8, 7. Mac OS 10.11, 10.10, 10.9, 10.8, 10.7, 10.6.
FLEXIBLE CABLE: Integrated and flexible 540mm (21 in.) USB 2.0 cable accommodates most installation scenarios. Total cable length of 25 inches when including the RS-232 (9pin) and USB Type A..
EASY SETUP: Simple installation in seconds of the USB to Serial 9-Pin Converter Cable. Insert the your computer.

Check Stock

EVISWIY PL2303TA USB to TTL Serial Cable Debug Console Cable for Raspberry Pi 3 Pack

【Built-in PL2303TA Chipset】- this usb to ttl serial cable with built-in PL2303TA chip is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port..
【Wide OS Support】- this usb ttl serial cable is supported by most common OSes such as win XP/VISTA/7/8/8.1/10/ Mac OS X/Linux. (please refer to http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41, and then download the Prolific 2303 driver). If you are running Linux, drivers are already included in the kernel, no need to install anything..
【Power Output】- this usb debug cable can be configured for either v5 or v3.3 power output. Built-in PL2303 chipset has an on-board DC-DC converter..
【Wide Application】- this pl2303 usb ttl cable widely used for laboratories, product testing and low cost MCU communications etc..

Check Stock

DSD TECH SH-U09C5 USB to TTL UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL

Support 4 kinds of TTL levels:This is a versatile USB to TTL converter. It is powerful enough to handle almost all TTL level communications. It is....
FTDI FT232RL Chip:Built-in original FTDI FT232RL Chip.The DSD TECH brand never uses cheap fake chips..
Not only provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND pins,but also provides access to DSR,R1,DCD,DTR,RESET pins.
Protective case: Come with a protective case, this transparent protective case can effectively prevent static interference from the hand and prevent....
WARRANTY:DSD TECH back this FTDI FT232RL USB to TTL UART adapter with 12 months warranty.If you meet any question, please contact us, we will fix your....

Check Stock

HiLetgo 10pcs Mini RS232 to TTL MAX3232 to TTL Level Converter Board Serial Converter Board RS232 to TTL Serial

HiLetgo Level Converter Board Mini TTL Rs232.

Check Stock

StarTech.com 4 Port Serial Hub USB to RS232/RS485/RS422 Adapter - Industrial USB 2.0 to DB9 Serial Converter Hub - IP30 Rated - Din Rail Mountable Metal Serial Hub - 15kV ESD Protection (ICUSB234854I)

RUGGED & RELIABLE: This industrial metal USB to serial adapter hub adds 4 RS-232/422/485 ports & 1 USB 2.0 port w/ 15kV ESD surge protection (level 4), IP30 rating & locking connectors on all ports.
4 SERIAL PORTS: The ports on this USB to serial converter can be individually configured to RS232, RS422 or RS485 (2wire/4wire) at baud rates up to 921.6Kbps for devices like barcode scanners/printers.
MOUNTING OPTIONS: This metal mountable 4-port serial hub w/ 6ft (1.8 m) screw-lock USB cable incl. installs securely to a desk, wall or DIN rail using the built-in mounting ears & incl. DIN brackets.
FLEXIBLE POWER: This serial hub can be powered with either the 12V screw-locking power adapter or the 5V USB input, while each serial port (pin 9) can be set to 5V, 12V (power adapter required), or 0V.
WIDELY COMPATIBLE: To connect industrial grade equipment to any terminal, the USB to multiple DB9 male serial converter supports current and legacy Windows, Linux, macOS, as well as embedded platforms.

Check Stock

DTECH USB to TTL Serial 3.3V Adapter Cable TX RX Signal 4 Pin 0.1 inch Pitch Female Socket PL2303 Prolific Chip Windows 10 8 7 XP Vista (6ft, Black)

6 ft USB to TTL serial adapter (with 4 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port.
A genuine PL2303TA chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
6 feet USB to TTL serial cable 3V3 (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND.
PL2303 Prolific chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
4 pin 3.3V USB to TTL converter cord Compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE.
ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc..

Check Stock