Top Usb To Rs232 Converter Driver Reviews

DTECH USB to RS422 RS485 Serial Port Converter Adapter Cable with FTDI Chip Supports Windows 11 10 8 7 XP Mac -1.5 Feet

  • USB to RS485/RS422 converter It easily lets you connect RS485 or RS422 device directly to your Laptop PC computer USB port (built with LED....
  • USB to RS485 cable adapter is Ideal for industrial environment -provides 600w surge protection and 15KV ESD isolated protection on signal pins to....
  • rs485 serial to usb converter is with high performance quality processor chip (FTDI-chipset FT232) and I/O auto conversion circuitry which makes RS....
  • 1.5 ft serial RS-422 RS-485 to USB adapter cable supports windows 11 10 8 7, Mac and more.
  • There are no IRQ and COM port conflicts, since the port do not require any additional IRQ, DMA, memory as resources on the system.
Check Stock

Waveshare USB to RS232 / RS485 / TTL Industrial Isolated Converter with Original FT232RL Embedded Protection Circuits and Aluminium Alloy Enclosure for Industrial Control Equipments

  • This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power....
  • The USB TO RS232/485/TTL is very easy to use fully automatic transceiving without delay. Due to its fast communication stability reliability and....
  • Fully automatic transceiver circuit with no delay ensures the USB port communicates with different interfaces fastly and stably without interfering....
  • Onboard unibody power supply isolation provides stable isolated voltage needs no extra power supply for the isolated terminal.
  • High quality USB-B and RS232 connectors smoothly plug/pull.
Check Stock

DTECH 10 Feet USB 2.0 to RS232 DB9 Serial Port Adapter Cable with FTDI Chipset Supports Windows 11 10 8 7 and Mac Linux

  • (NOT USB to VGA adapter) USB to serial adapter FT232 cable allows your computer to make communication with serial devices equipped with 9 pin female....
  • USB to male serial port adapter cord is designed for connecting Serial devices such as DB9 equipped PC, router, GPS, Programming machine, barcode....
  • (FT232 chip) Long FTDI serial cable to USB adapter for Windows 11,10, 8, 7, Mac OS 8 or higher, Linux 2.4.0 and later (9 wire pinout 1-9: DCD, RXD,....
  • COM port serial to usb converter is designed with a high performance quality processor chip (FT232RL), which makes this USB RS232 adapter one of the....
  • 10ft DB9 RS232 to USB adapter with 9 pin male to USB-A male gold plated connector uses crystal clear blue enrich injection, strong and beautiful.
Check Stock

StarTech.com USB to Serial RS232 Adapter - DB9 Serial DCE Adapter Cable with FTDI – Null Modem - USB 1.1 / 2.0 – Bus-Powered (ICUSB232FTN)

  • MAXIMIZED PORTABILITY: This USB to serial RS232 adapter with FTDI features a single cable design removing the need for additional adapters and cables.
  • CORRECT DTE/DCE CONFLICTS: Convert your available USB port into a null modem RS232 DB9 serial port, resolving any DTE/DCE conflicts.
  • BROAD COMPATIBILITY: Compatible with your USB 1.0 or 2.0 ports, this RS232 converter works with your Windows, Mac or Linux systems.
  • FAST TRANSFER SPEEDS: Experience fast speeds with this serial adapter, supporting a Baud Rate up to 921.6Kbps.
Check Stock

DTECH FTDI USB to Serial Adapter Cable RS232 DB9 Male Port FT232RL Chipset Supports Windows 11 10 8 7 and Mac Linux 1.5 Feet

  • It's Male Serial to USB cable (9 pin com port to USB A male) that allows your PC to connect RS-232 serial devices and programs that communicate....
  • FT232RL USB to serial adapter is designed for connecting serial devices such as DB9 equipped PC, router, GPS, Programming machine, barcode scanner,....
  • 1.5ft short USB to RS 232 cord for Windows 11, 10, 8.1, 8, 7, Mac OS 8 or higher, Linux 2.4.0 and later.
  • FTDI USB to serial cable adapter is built with a high performance quality processor chip (FT232 Chipset), which makes it one of the most reliable com....
  • DB9 serial to USB converter with LED light helps you check the connection status easily.
Check Stock

DSD TECH SH-RJ12A USB to RJ12 6P4C RS232 Serial Cable with FTDI Chip

  • USB to RJ12 6P6C RS232 FTDI Serial Converter APC PDU Cable for APC UPS 940-0144.
  • USB to RJ-12 PDU is a fully compatible replacement cable for APC 940-0144 and 940-0144a in a USB version.
  • Durable molded cable on both ends. Tested to perform as the original PDU 940-0144 Cable.
  • Compatible with APC metered and switched PDU AP78xx, AP79xx, AP86xx, AP88xx, AP89xx, etc.
  • FTDI chipset allows for easy installation on Windows, MacOS, and Linux. Linux has driver installed by default. Windows automatically downloads the driver from windows update Drivers are available for download if needed.
Check Stock

StarTech.com 4 Port Serial Hub USB to RS232/RS485/RS422 Adapter - Industrial USB 2.0 to DB9 Serial Converter Hub - IP30 Rated - Din Rail Mountable Metal Serial Hub - 15kV ESD Protection (ICUSB234854I)

  • RUGGED & RELIABLE: This industrial metal USB to serial adapter hub adds 4 RS-232/422/485 ports & 1 USB 2.0 port w/ 15kV ESD surge protection (level 4), IP30 rating & locking connectors on all ports.
  • 4 SERIAL PORTS: The ports on this USB to serial converter can be individually configured to RS232, RS422 or RS485 (2wire/4wire) at baud rates up to 921.6Kbps for devices like barcode scanners/printers.
  • MOUNTING OPTIONS: This metal mountable 4-port serial hub w/ 6ft (1.8 m) screw-lock USB cable incl. installs securely to a desk, wall or DIN rail using the built-in mounting ears & incl. DIN brackets.
  • FLEXIBLE POWER: This serial hub can be powered with either the 12V screw-locking power adapter or the 5V USB input, while each serial port (pin 9) can be set to 5V, 12V (power adapter required), or 0V.
  • WIDELY COMPATIBLE: To connect industrial grade equipment to any terminal, the USB to multiple DB9 male serial converter supports current and legacy Windows, Linux, macOS, as well as embedded platforms.
Check Stock

Geekstory BN-880 GPS Module U8 with Flash HMC5883L Compass + GPS Active Antenna Support GPS Glonass Beidou Car Navigation for Arduino Raspberry Pi Aircraft Pixhawk APM Flight Controller

  • BN-880 is suitable for Open source flight controller, not for flight control with SCM.
  • Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L.
  • Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it.
  • DIts data Level is TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software.
Check Stock

DTECH USB to Serial Adapter Cable with RS232 DB9 Male Port FTDI Chipset Supports Windows 10 8 7 and Mac Linux - 4 Feet

  • (It's NOT 15 pin VGA Monitor Cable) The Male Serial to USB cable (9 pin to USB A male) allows your PC to connect RS-232 serial devices and programs that communicate through COM ports.
  • USB to serial adapter is designed for connecting serial devices such as DB9 equipped PC, router, GPS, Programming machine, barcode scanner, label writer, serial modem, digital camera, card reader, palm PC and digital organizer, etc.
  • USB to RS232 cord for Windows 10, 8.1, 8, 7, Mac OS 8 or higher, Linux 2.4.0 and later.
  • FTDI USB to serial cable is built with a high performance quality processor chip (FT232 Chipset), which makes it one of the most reliable com port to usb adapter on the market.
  • 4ft DB9 serial port to USB converter with LED light helps you check the connection status easily.
Check Stock

DIYmalls BN-180 GPS Module TTL Dual Glonass GPS + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk Aircraft CC3D Betaflight Flight Control

  • BN180 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to....
  • When you power up bn 180 GPS module the first time in a new location, it always takes longer to find satillites. This is referred to as “cold....
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • BN 180 gps doesn't have flash and compass. If you need it, please buy bn-880 gps module via "Visit the DIYmalls Store".
  • If you have any problem, please contact seller as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page,....
Check Stock

Industrial USB to RS485 Converter Adapter Original FT232RL Fast Communication Embedded Protection Circuits Resettable Fuse ESD Protection TVS Diode etc Automatic Transceiving

  • This is an industrial USB to RS485 converter with original FT232RL inside. It features embedded protection circuits such as lightning-proof,....
  • The USB TO RS485 is very easy to use, allows automatic transceiving. Due to its fast communication, stability, reliability, and safety, it is an ideal....
  • USB to RS485 communication. Adopt original FT232RL, fast communicating, stable and reliable, better compatibility..
  • Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof &....
  • 3 LEDs for indicating the power and transceiver status.Operating system: Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XP.
Check Stock

DTECH RS232 to RS485 Serial Converter Adapter with 4 Position Terminal Block for Industrial Long Haul Communication Data Supports 600W Anti-Surge

  • Commercial Grade Bi-Direction RS232 to RS485 Converter used in Industrial Long-haul Communication up to 4000ft (1200 meters).
  • Mini RS 232 to 485 serial adapter enables the connections of multiple bus nodes and 32 devices can be joined in RS-485 network.
  • RS-232 to RS-485 Converter controls the “Receive” and “Transmit” modes automatically.
  • Up to 115.2kbps baud rate (auto-detect) can be applied to point to point two wire half duplex and point to multi-point two wire half duplex....
  • A built-in Transient Voltage Suppressor (TVS) supports 600W anti-surge protection on each line of RS485 link which effectively guard devices from....
Check Stock

Geekstory BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control

  • BN-220 gps module has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory..
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software.
  • The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place..
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.
  • BN 220 gps module documentation link cannot be displayed. If you need technical documentation, please click “Ask a question” to em-ail us.
Check Stock