Top Upper Cylinder Lubricant Reviews

Red Line 60103 Complete SI-1 Fuel System Cleaner, 15 Ounce, (15 Ounce, (Pack of 2))

  • Cleans to nearly 100 percent efficiency in one treatment.
  • Reduces need for octane by up to two points.
  • Contains synthetic upper cylinder lubricant.
  • Use one bottle per tank for most effective treatment of neglected vehicle.
Check Stock

Gunk 7.8 Oz Liquid Fire Starting Fluid M3911 [Set of 12]

  • Designed for all gasoline engines and diesel engines without glow plugs.
  • Fits injector bracket on most diesel trucks and heavy equipment.
  • Produce quick, smooth starting of gasoline and diesel engines under extreme cold conditions down to -65 deg F.
  • Saves battery and ignition during cold weather.
  • Contains upper cylinder lubricant and corrosion inhibitors.
Check Stock

EDSRDUS Brake Grease Anti Seize Lubricant Waterproof Anti-Rust Anti-Corrosion Wear Resistance Grease Tube for Lubricating The Brake System 0.5 Oz.x3 Tube Pack

  • APPLICATION: The wheel cylinder maintenance grease lubricates the movable shaft and piston surface of the brake system's sub-cylinder, extending the....
  • FUNCTION: Resistance to abrasion, water, rust, and aging, as well as resistance to corrosion. Additionally, the service life of our greases is....
  • PACKAGE INCLUDE: The set includes three tubes of grease: one with a red shell for wheel cylinder maintenance grease, one with a gray shell for....
  • TEMPERATURE RANGE: -4°F~302°F (-20°C~150°C) for wheel cylinder maintenance grease.
  • -4°F~1112°F (-20°C~600°C) for anti-seize lubricant.
  • EASY TO USE: These greases are used in the same way as traditional grease, but please use brake lubricant on the back and sides of the brake pads....
Check Stock

Rislone Hy-per Fuel Complete Fuel System Cleaner Gas

  • Six in one: equal to a bottle of regular injector & complete fuel system cleaner, upper cylinder lubricant, fuel stabilizer and conditioner, dry gas, gas treatment and octane booster.
  • Increase power and performance: boosts octane, power, performance and mileage, stabilizes gas, lubricates and protects.
  • Save gas: cleans and lubricates the complete fuel system.
  • engine dynamometer tests show improved fuel economy.
  • Run smoother: helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation.
  • regular use provides reduced fuel system and emission control repairs..
  • EPA registered: will not void manufacturer’s new vehicle warranty and safe to use on vehicles with oxygen sensors and catalytic converters.
  • exceeds epa compliance performance criteria and is epa registered.
Check Stock

Champion 80% Ether Professional-Grade Starting Fluid with Cylinder Lube Unique High-Potency Formula for Gas and Diesel Engines 11 oz 12 Pack

  • PREMIUM FORMULATION: Professional Grade for Faster Starts and Better Protection..
  • COMPATIBLE WITH GAS AND DIESEL: Works great on gas and diesel engines..
  • FASTER, MORE DEPENDABLE STARTS: Allows faster starts and reduces wear on batteries..
  • MAXIMUM PROTECTION: Contains upper cylinder lubricant for added protection..
  • Observe ALL product WARNINGS, Use PPE. WARNING – NO SMOKING!.
Check Stock

STA-BIL Starting Fluid - Prolongs Starter Life - Upper Cylinder Lube - for Gasoline and Diesel Engines - Guaranteed Faster Starts Down to -65°F 11 oz 22004

  • Faster starts, even in temperatures as low as -65°F.
  • Formula contains upper cylinder lubricant as well as corrosion inhibitors.
  • For gasoline and diesel engines - Including: cars, trucks, motorcycles, tractors, buses, marine engines, lawnmowers, snowmobiles, snow blowers, construction equipment, etc..
  • Will not harm catalytic convertors or oxygen sensors.
Check Stock

Schaeffer Manufacturing Co 0700CK4-006 SynShield Durability Advantage Diesel Engine Oil 15W-40 1-Gallon Bottle Pack of 6

  • Directions: Add full 5 ounce to 25 gallon Fuel Tank every fill-up, maintain the ratio of 1 ounce per 5 gallon of fuel.
  • Compatible in both fuel and diesel engines and more concentrated fuel cleaning capability then the brand leader.
  • Motorkote upper cylinder lubricant is safe for use in all catalytic converters, carburetors, and fuel injection systems and will not void warranties.
  • Can be used with Motorkote fuel optimizer or Motorkote low sulfur lube in diesel engines, alternate products between fill-ups.
  • Cleans injectors to reduce: Power loss, hesitations, pinging/dieseling, loss of fuel economy.
Check Stock

ProVision PV2 Flexible Fiberscope / Inspection Scope w/ 36 In Non-Obedient Cable

  • ... ergonomics design, which can be comfortably held, effortless to use, easy to operate, labor-saving, and high-efficiency, bringing you a lot of convenience. Flexible shaft, easy to use, and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole..
  • 【Use steps】Spray lubricant on the stone or cylinder hole. Set the whetstone on the drill bit, insert the engine whetstone into the cylinder, and then run the drill bit at a low speed of 300-700 RPM. Move the bone left and right every second, and never push the stone more than 3/4 inch away from the cylinder. The engine hone time should not exceed 3 minutes, after honing, wipe the inside of the drum with a paper towel..
Check Stock

Run-Rite G.D.I Preventative Maintenance Kit - Fuel System Cleaner for Gasoline Direct Injection Engine, Valves, Induction Components & Fuel Injector Cleaner Kit - Clean Carbon & Fuel Deposits - 2 Kits

  • Six in one: equal to a bottle of regular injector & complete fuel system cleaner, upper cylinder lubricant, fuel stabilizer and conditioner, dry gas, gas treatment and octane booster.
  • Increase power and performance: boosts octane, power, performance and mileage, stabilizes gas, lubricates and protects.
  • Save gas: cleans and lubricates the complete fuel system.
  • engine dynamometer tests show improved fuel economy.
  • Run smoother: helps eliminate noisy injectors and fuel pumps, rough idle, hard starting and hesitation.
  • regular use provides reduced fuel system and emission control repairs..
  • EPA registered: will not void manufacturer’s new vehicle warranty and safe to use on vehicles with oxygen sensors and catalytic converters.
  • exceeds epa compliance performance criteria and is epa registered.
Check Stock

SUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red

  • Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
  • The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
  • Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
  • Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
  • Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
  • Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
  • The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check Stock

Universal Cylinder Liner Puller Assembly - Heavy Duty Diesel Engine Cylinder Liner Puller Used for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” bore, Alternative to PT-6400-C M50010-B 3376015

  • 【Application】Compatible with Mack Cummins Volvo Detroit International and other Cat Engines 3176, 3196, 3300 Series, 3400 Series, 3500 Series, C10, C12, C15, C16 Maxxforce DT, DT360, DTA360, DTA466, DT466, DT530 (PLN),DT466E, DT530E, DT570, HT570..
  • 【Direct Replacement】Our universal cylinder liner puller direct replacement for OEM #PT-6400-C, M50010-B and 3376015..
  • 【Function】This universal liner puller works on wet liners of from 3-7/8” to 6-1/4” bore, up to 15” deep, with a minimum wall thickness of .148. Used to safely & correctly remove the cylinder liners avoiding damage to the cylinder block..
  • 【Important】Threads must be lubricated with J23444-A or equivalent high pressure lubricant for heavy duty truck applications. (Package Includes 1 x Grease AND 1 x Cylinder Liner Puller Tools Kit PT-6400-C.).
  • 【Superior Material】Crafted from quality carbon steel, high strength, anti-wear, rust resistance, anti-oxidation, sturdy and durable..
Check Stock

Head Stud Replacement Kit for 7.3L 1993-2002 Ford Power Stroke Diesel CP879

  • ...drawn diagrams to ease the installation process. Head studs are designed to retain cylinder seal even with today's extreme high pressure turbo systems. These studs far exceed clamping forces provided by standard head bolts..
  • KIT INCLUDES - 36x Heads Studs, 36x Nuts, 36x Hardened Parallel Washer, 1x Fastener Assembly Lubricant & Instructions Manual. Black oxide finish protects from wear and tear. Hardened parallel washers allow for uniform load distribution and accurate torque readings..
  • WORRY-FREE PURCHASE - Xotic Performance is dedicated to offering LIFETIME WARRANTY and full money back guarantee if you aren’t satisfied. Rigorous quality inspections are undertaken to ensure premium product standards..
Check Stock

Permatex 81343 Anti-Seize Lubricant, 1 oz. Tube , White

  • Highly refined blend of aluminum, copper and graphite lubricants.
  • Salt, corrosion and moisture resistant, this lubricant is ideal for marine use.
  • Prevents galling, corrosion and seizing and to assure easier disassembly.
  • Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts.
Check Stock