Top Underground Fittings Reviews

Pipe Décor 1½ in. x 6 in. Black Steel Pipe, Pre-Cut, Industrial Steel Grey Fits Standard 1½ Inch Black Threaded Pipes, Nipples and Fittings, 6 Pack

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

Genova Products 30190 PVC Slip Coupling, 2-1/2"

  • Ideal for cold water pressure applications.
  • Used in irrigation, underground residential sprinkler system, water service pipe, deionized water lines, swimming pool installations and some chemical drainage systems.
  • INSIDE MEASUREMENT – 2-1/2″ slip x 2-1/2″ slip.
Check Stock

SharkBite SBDC35 De-Mount Clip, 1-1/4-Inch , Orange

  • Instant Push-Fit connection for increased ease-of-use..
  • No soldering, clamps, unions, or glue required..
  • Fittings certified to 200 PSI and 200°F (93°C)..
  • Fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination..
  • Approved to be used underground and behind walls without access panels.
Check Stock

Gas Flex 1/2 Tubing Pipe KIT 33ft with 2 MALE Fittings Gasflex

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • Comes with a 1/2" MALE NPT fittings on both ends.
  • Running gas lines to remote areas in the yard (BBQ -Jacuzzi - FIRE PIT).
  • ½" Nominal Pipe size: 12mm ID x 16mmOD (0.48" ID x 0.63" OD)..
Check Stock

Rain Bird T63-100S Drip Irrigation 1/2' (.630' OD) Blank Distribution Tubing, 100' Roll, Black

  • Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas.
  • Connects easily to your faucet, garden hose, or existing underground sprinkler head (with Rain Bird conversion kits).
  • Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage.
  • Self-dispensing coil reduces layout time and speeds installation.
  • Unique Micro-Porous design creates an ultra-tight connection to fittings.
  • Connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes (sold separately).
  • Tubing specifications: 0.634" outside diameter, 0.536" inside diameter, 0.049” wall thickness.
  • Operating pressure: 0 to 70 psi. Tap into side with barbed drip emitters and 1/4 in. tubing to run water directly to plants.
Check Stock

uxcell PVC Pipe Fitting Hex Nipple G1-1/2 X G1-1/2 Male Thread Adapter Connector 2pcs

  • Adapts pressure pipe to standard female pipe threads.
  • Will not crack, change color or degrade over time like other sub-par PVC fittings..
  • good for irrigation and underground residential sprinkler systems.
  • Before ordering, please confirm the right size!.
Check Stock

CARPATHEN 1/4 Drip Irrigation Tubing - 60 ft Black Drip Irrigation Hose Perfect for DIY Garden Irrigation System, Hydroponics, Misting Tubing, or as Blank Distribution Tubing for Any Garden Project

  • Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas.
  • Connects easily to your faucet, garden hose, or existing underground sprinkler head (with Rain Bird conversion kits).
  • Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage.
  • Self-dispensing coil reduces layout time and speeds installation.
  • Unique Micro-Porous design creates an ultra-tight connection to fittings.
  • Connect in any arrangement using Rain Bird 1/2" universal barbed or Easy Fit compression fittings and stakes (sold separately).
  • Tubing specifications: outside diameter 0.700.
Check Stock

SharkBite 1 Inch Tee, Pack of 3, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U374LF

  • SHARKBITE BRASS PUSH TEE: This push-to-connect fitting can be used when joining pipes of the same sizes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this push tee can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

  • SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
  • remove using a disconnect clip or disconnect tongs.
  • COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
  • gray collar end works with polybutylene pipe.
  • tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.
Check Stock

SharkBite 3/4 Inch x 1/2 Inch Reducing Coupling, Pack of 12, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U058LF

  • SHARKBITE BRASS PUSH REDUCING COUPLING: This push-to-connect fitting allows you to make a connection between two different-sized pipes in any combination.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The SharkBite brass reducing couplers allow for easy installation, with no tools, crimping, glue, or soldering required.
  • can be installed in wet lines and approved for underground and behind-the-wall applications with no access panels.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • SPECS: Made with DZR forged brass, this brass reducing coupling can withstand 200 degrees F and 200 PSI.
Check Stock

MIXC 1/4 inch Blank Distribution Tubing Drip Irrigation Hose, 50ft Roll

  • MIXC drip hose made by high quality. It can be left out year-round, buried or on the surface, in any weather..
  • Flexible: Industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation in garden, flower bed, ground cover or other landscaped areas..
  • Function:Use as the main line in a small Drip irrigation system or to branch off from larger 1/2" Drip tubing to micro-watering system..
  • Compatible with most brands of 1/4" Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays..
  • Perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks. Designed for underground or above-ground installation..
Check Stock

Rain Bird T22-250S Drip Irrigation 1/4\ Blank Distribution Tubing, 250' Roll, Black

  • Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas.
  • Use as the main line in a small Drip irrigation system or to branch off from larger 1/2" Drip tubing to micro-watering devices.
  • Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage.
  • Unique Micro-Porous design creates an ultra-tight connection.
  • Compatible with most brands of 1/4" Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays.
  • Designed for underground or above-ground installation.
  • Tubing specifications: outside diameter 0.25.
Check Stock

SharkBite 3/4 Inch x 3/4 Inch x 1/2 Inch Reducing Tee, Pack of 6, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U412LF

  • SHARKBITE BRASS PUSH REDUCING TEE: This push-to-connect fitting can be used when joining two different-sized pipes quickly and easily.
  • remove using a disconnect clip or disconnect tongs.
  • VERSATILE: Pushfit reducing tees work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass reducing tees allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use.
  • suitable for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing tee can withstand 200 degrees F and 200 PSI.
Check Stock