Top Uncoated Cutters Reviews

KEO 63030 High-Speed Steel Woodruff Keyseat Cutter, Uncoated (Bright) Finish, Round Shank, 1/2\ Shank Diameter, 3/8\ Cutter Diameter, 8 Straight Teeth, 3/32\ Face Width

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • KEO woodruff keyseat cutters are extremely versatile profile milling cutters.
Check Stock

KEO 64040 High-Speed Steel Woodruff Keyseat Cutter, Uncoated (Bright) Finish, Round Shank, 1/2\ Shank Diameter, 1/2\ Cutter Diameter, 10 Straight Teeth, 1/8\ Face Width

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • KEO woodruff keyseat cutters are extremely versatile profile milling cutters.
Check Stock

KEO 68060 High-Speed Steel Woodruff Keyseat Cutter, Uncoated (Bright) Finish, Round Shank, 1/2\ Shank Diameter, 3/4\ Cutter Diameter, 10 Straight Teeth, 1/4\ Face Width

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • KEO woodruff keyseat cutters are extremely versatile profile milling cutters.
Check Stock

KEO 66065 High-Speed Steel Woodruff Keyseat Cutter, Uncoated (Bright) Finish, Round Shank, 1/2\ Shank Diameter, 3/4\ Cutter Diameter, 8 Stagger Teeth, 3/16\ Face Width

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • KEO woodruff keyseat cutters are extremely versatile profile milling cutters.
Check Stock

KEO 66060 High-Speed Steel Woodruff Keyseat Cutter Uncoated Bright Finish Round Shank 1/2 Shank Diameter 3/4 Cutter Diameter 10 Straight Teeth 3/16 Face Width

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • KEO woodruff keyseat cutters are extremely versatile profile milling cutters.
Check Stock

KEO 68120 High-Speed Steel Woodruff Keyseat Cutter, Uncoated (Bright) Finish, Round Shank, 1/2\ Shank Diameter, 1-1/2\ Cutter Diameter, 16 Straight Teeth, 1/4\ Face Width

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Round shanks allow use with a wide variety of toolholding systems.
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
  • KEO woodruff keyseat cutters are extremely versatile profile milling cutters.
Check Stock

Wkstool 6Pcs/Lot,6.3 8 10 12.4 20.5 25mm Blade,90 Degree,Industry Chamfering Chamfer Metal Countersink End Mill Cutter Drill Bit,High Speed Steel,Deburring Tool Set 6.3/8/10/12.4/20.5/25mm 3Flute

  • Includes ,6.3 8 10 12.4 20.5 25mm blade diameter cutters,6pcs bits,Material:Uncoated HSS M2AI,Round Handle.
  • 3Flute chamfering with 90° Countersink Angle on the point for sharp and precise countersinking.
  • Can be use both at home or industry.Suitable for Aluminum,Brass, Bronze, Iron, Plastic,Stainless,thin iron plate,wood,carbon steel,insulation board,or PVC board etc.
  • High-precision,Manufactured to exacting tolerances,Full grinded,high abrasion resistance,best obtain accuracy and fine finish..
Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

  • Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
  • Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chip breake.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

Quilter’s Cut 60mm Rotary Blades, 10 Pack, Fits Olfa, Fiskars, Martelli, Truecut

  • ULTRA DURABLE Titanium coated SKS-7 tungsten steel blades which give greater life span with a razor sharp cutting edge which will last a lot longer than uncoated steel blades.No Rust..
  • Perfect Blades for quilting, sewing, scrapbooking supplies ,art and crafts: Rotary cutter blades can be used to cut fabric, paper,fleece, felt, vinyl, leather, cardboard, wallpaper, and more..
  • Designed to fit 60mm rotary cutters.COMPATIBLE, these replacement blades are compatible to for all type 28mm rotary cutter.If they don’t fit yours, return them for a full refund.
  • Package include 10pcs titanium rotary cutter blades 60mm, and 1 piece storage case.
Check Stock

Skulls Pattern Grunge Heat Transfer Vinyl Sheet for Silhouette 12 x 18 - High Quality HTV for Clothing - Free Bonus Transfer Mask Included Premium Heat Transfer Vinyl

  • Printed size is 12"W x 18"H - Premium Quality Print Guaranteed Heat Transfer Vinyl HTV.
  • Free Bonus Transfer Mask Included to get you started with your HTV!.
  • Heat Press is recommended but can be done with an Iron - Instructions are included for easy application..
  • Simply cut out any designs with our HTV patterns and press them to your garment : 100% cotton, 100% uncoated polyester, and poly/cotton blends..
  • Compatible with all vinyl cutters/plotters - Custom Orders are Welcome Please email us.
Check Stock

USA Flag Heat Transfer Vinyl for T-Shirt Sleeve Silhouette - High Quality HTV for Clothing - Free Bonus Transfer Mask Included Premium Heat Transfer Vinyl

  • USA flag size is 3"W x 1.5"H / Total Printed sheet is 12"W x 18"H - Premium Quality HTV Guaranteed.
  • Free Bonus Transfer Mask Included to get you started!.
  • Heat Press is recommended but can be done with an Iron - Instructions are included for easy application..
  • Simply cut out any designs with our HTV patterns and press them to your garment : 100% cotton, 100% uncoated polyester and poly/cotton blends..
  • Compatible with all vinyl cutters/plotters - Custom Orders are Welcome Please email us.
Check Stock

HEADLEY TOOLS 45mm Rotary Cutter Blades 15 Pack Fits Olfa, Fiskars, Replacement Rotary Blade for Arts Crafts Quilting Scrapbooking Sewing, Sharp and Durable

  • ULTRA DURABLE Titanium coated SKS-7 tungsten steel blades which give greater life span with a razor sharp cutting edge which will last a lot longer than uncoated steel blades.No Rust..
  • Perfect Blades for quilting, sewing, scrapbooking supplies ,art and crafts: Rotary cutter blades can be used to cut fabric, paper,fleece, felt, vinyl, leather, cardboard, wallpaper, and more..
  • Designed to fit 45mm rotary cutters.COMPATIBLE, these replacement blades are compatible to for all type 45mm rotary cutter.If they don’t fit yours, return them for a full refund.
  • Package include 10pcs titanium rotary cutter blades 45mm, and 1 piece storage case.
Check Stock

Titanium Coated Rotary Cutter Blades 45mm 10 Pack Fits Fiskars 45mm Rotary Cutter, Replacement Blades Quilting Scrapbooking Sewing Arts Crafts

  • ULTRA DURABLE TITANIUM coated Japanese Steel SKS-7 tungsten steel blades which give greater life span with a razor sharp cutting edge which will last a lot longer than uncoated steel blades.No Rust..
  • COMPATIBLE, these replacement blades are compatible to for all type 45mm rotary cutters such as Fiskars rotary cutter,Olfa rotary cutter etc....
  • VERY SHARP, Cleanly slices through multi-layer cutting of card, fabric, fleece, vinyl, leather, cloth, felt, etc of up to about 8-16mm at once..
  • Perfect Blades for sewing,quilting, art and crafts,The ideal cutting paper, fabric, leather, plastic, cloth, etc.For cutting at home, office, school, shop, especially the use of technology..
  • Package include 10pcs rotary blades and 1pc storage case.
Check Stock