Top Uart Support Reviews

XISAOK UART Serial MP3 Music Player Module with Speaker Monaural Amplifier Board for Arduino MP3 Music Player Module

㊥ Our product design is unique, not only beautiful but also practical..
㊥ The module is a kind of simple MP3 player device which is based on a high-quality MP3 audio chip. It can support 8k Hz ~ 48k Hz sampling frequency....
㊥ There is a TF card socket on board, so you can plug the micro SD card that stores audio files. MCU can control the MP3 playback state by sending....
㊥ UART port, such as switch songs, change the volume and play mode and so on. You can also debug the module via USB to UART module. It is compatible....
㊥ Our Brand is dedicated to provide high standard products，we have confidence in our products and provide after sale support,if you have products....

Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.

Check Stock

USB to TTL Serial 3.3V UART Converter Cable with FTDI Chip Terminated by 6 Way Header Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More

Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB....
Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5.
Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved.
Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in....
The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold....

Check Stock

FYSETC 3D Printer Parts Stepstick Mute TMC2209 V3.1 Stepper Motor Driver UART Mode with Heatsink for Reprap Ram1.4 MKS Gen/SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 Control Motherboard-5Pcs

TMC2209 V3.1: ultra-silent motor driver, 2020 New Version, compatible to a number of legacy drivers as well as to the TMC2208, Support UART mode, compatible with popular motherboards such as FYSETC S6/F6, MKS SGENL, MKS GENL v2.0, MKS Robin E3D, SKRv1.3/1.4. Heat sink color is random: Blue or Black..
Upgrade Tips: add CLK pin, not connect in default, tie to GND via 0R.
SPREAD pin is floating. Reserve pull-up and pull-down resistors. Move TX from 3 to 5..
Advantage 1: StallGuard for sensorless homing. The integrated power MOSFETs handle motor currents up to 2A RMS with protection and diagnostic features for robust and reliable operation. A simple to use UART interface opens up tuning and control options. Store application tuning to OTP memory..
Advantage 2: Industries’ most advanced STEP/DIR stepper motor driver family upgrades designs to noiseless and most precise operation for cost-effective and highly competitive solutions..
Advantage 3: Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A peak –StealthChop for Quiet Movement – UART Interface Option –Sensorless Stall Detection StallGuard4..

Check Stock

DALY Smart BMS 24V L-ion 7S 60A with Bluetooth Module Resetting Program Common Port for DIY Lithium Battery Pack

【Parameter Real Time View】---With Smart Communication Function UART Protocol ,All Parameters can be check Via Bluetooth App or UART USB Connection with PC Monitoring Program..
【Parameters Programmable】 Charge And Discharge Protection Current ,Voltage,Temperature Can Be Reset in Certain Range.
【Alarm Reminder:】When Factors Like Temperature, Voltage , Current Cause Negative Affection to Battery , There Will be Alarm Display on Bluetooth Smart BMS APP/ PC Monitoring Program..
【Quality Guarantee】 ISO/ FCC/ RoHS/ PSE/ CE APPROVED.Shipping time within 9-14 days from China Dalyelec Manufacturing base normally. Delivery will be postponed as per National Holidays Regulation. Tracking information available..
【What you will get: 】Rated 3.7V Li-ion Smart BMS (With Smart Communication Function UART)+Bluetooth Module +UART USB +Matching Balance Wire+Temperature Sensor+ Instruction Manual.

Check Stock

Geniatech XPI-3128 Single Board Computer,Embedded Computer Module,Development Board ,Rockchip RK3128 Quad Core Cortex-A7 8GB WiFi ,Card-Sized High Performance Board

85mm*56mm, Credit-card-sized High Performance Board.
4*USB HOST, 1*HDMI Out, 1*Micro USB, 1*UART, 1*GPIO interface, WiFi and 100M LAN interface,Support Micro SD card.
Rockchip RK3128 with Quad-core Cortex-A7 up to 1.2GHz.
40 Pin header enables hardware re-use by maintaining compatible alternate pin functions like I2S, I2C, PWM, UART, and GPIO. Form-factor compatible with Raspberry Pi 3 for easy migration..
Form Factor & GPIO Compatibility with Raspberry Pi for Maximum Re-usability.

Check Stock

DSD TECH SH-U09C5 USB to TTL UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL

Support 4 kinds of TTL levels:This is a versatile USB to TTL converter. It is powerful enough to handle almost all TTL level communications. It is....
FTDI FT232RL Chip:Built-in original FTDI FT232RL Chip.The DSD TECH brand never uses cheap fake chips..
Not only provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND pins,but also provides access to DSR,R1,DCD,DTR,RESET pins.
Protective case: Come with a protective case, this transparent protective case can effectively prevent static interference from the hand and prevent....
WARRANTY:DSD TECH back this FTDI FT232RL USB to TTL UART adapter with 12 months warranty.If you meet any question, please contact us, we will fix your....

Check Stock

FTDI USB-RS485-WE-1800-BT Cable, USB to RS485 Serial, 1.8M, Wire END

Price For: Each Accessory Type: CABLE, SERIAL CONVERSION For Use With: USB to RS485, SERIAL CONVERSION RoHS Compliant: Yes.
The USB-RS485-WE-1800-BT from FTDI is an USB to UART cable with RS485 level UART signals..
It corporate FTDI's FT232RQ USB to serial UART interface IC which handles all USB signalling and protocols.
The integrated electronics also include RS485 transceiver, Tx and Rx LEDs which give a visual indication of traffic on cable..

Check Stock

Orange Pi R1 Plus LTS 1GB RAM, Rockchip RK3328, Open Source Single Board PC Functional Computer Running Android 9/Ubuntu/Debian/Open WRT OS (R1 Plus LTS+Black Metal Shell Panel+Type-C Power Supply)

【HIGH PERFORMANCE DESIGN】: Rockchip RK3328 quad-core ARM cortex-A53 64-bit processor, main frequency speeds up to 1.5GHz.RK805 of power management chip.Mali-450MP2 supports openGL ES 1.0/2.0 and 1GB LPDDR3(shared with GPU)..
【COMPATIBILITY】: 1 *USB 2.0 host, 2*USB 2.0 (not supported) and 1 GPIO port.Iintegrated 3.5mm audio port, TF card storage, HDMI2.0a output, power management, infrared reception, USB2.0 interface, LED indicator, 1*cooling fan interface (5V), double gigabit ethernet interface ..
【EXTENSIBILITY】: 13pin connector with UART, I2C, IR pin, Tv-out, AUDIO (no MIC), 2*USB2.0 (not supported) and 1 GPIO port. Note: 13pin headers will not be welded. UART-TX、UART-RX&GND of debug serial port..
【SUPPORT OPEN-SOURCE】: The Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch Pretty much anything else. Popular Linux-based distributions like Ubuntu、Debian ect operating system..
【NOTICE!!!】: Packeage includ:1✖ Orange Pi R1 Plus LTS 1GB RAM, 1✖Type-C Power Supply, 1✖ Black Metal Shell Panel.By default, we won't responsible for customs clearance fee charged by your local. Our shipping time generally takes 15 days, Not as long as Amazon suggest....

Check Stock

Ingcool GSM/GPRS/GNSS Bluetooth HAT Expansion Board for Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero W/ Zero, Based on SIM868 Module Supports SMS, Phone Call, Global Position, Transfer Data, etc.

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc. Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning. Bluetooth 3.0, supports data transferring through Bluetooth.
SIM card slot for 1.8V/3V SIM card, Supports SIM application toolkit: GSM 11.14 Release 99.
Baudrate auto detection (1200bps ~115200bps). Onboard USB TO UART converter for UART debugging. 6x LEDs for indicating the module working status. RTC with backup battery holder.
Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands). Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).

Check Stock

BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3 with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts

【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
Upgrade the firmware by SD card. It is easy and convenient to....
【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....

Check Stock

sb components Raspberry Pi Serial Expansion HAT, Provides I2C Interface & 2-Channel UART HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero and Zero W | Serial HAT for Raspberry Pi

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards..
Onboard SC16IS752, expands 2-ch UART and 8 programmable GPIO through I2C, no extra pin required..
It is stackable up to 16 this modules by setting the address jumper, that means up to 32-ch UART..
Onboard multi LEDs for indicating the UART working status..
Reserved I2C control pins, allows to work with other control boards.

Check Stock

seeed studio Ethernet Shield

High-speed Ethernet controller W5200 with integrated Ethernet MAC & PHY.
Supply voltage: min: 4.75VDC, typical: 5VDC.
microSD card socket supports SD card in FAT16 or FA.

Check Stock