Top U Joint Puller Meritor Reviews

OTC Tools 5190A Heavy Duty U-Joint Puller for Use on Class 7 and 8 Trucks

  • Ideal tool for removing Heavy-Duty driveline U-Joints on Class 7 and 8 Trucks in conjunction with up to a 1 inch impact wrench (not included) - without the need for heat or hammering.
  • Large diameter threaded shaft can handle U-joints that are severly seized due to corrosion and require more force to disassemble.
  • Smooth, crisp threads allows for a lower, more consistent effort to rotate shaft.
  • will not damage the driveshaft, yoke, bearing cups, or joints.
  • Major tool components are heat treated for improved strength and durability, ensuring a long, productive service life.
  • Fits Spicer driveline 1610, 1710, 1760, 1810, 1880.
  • Spicer SPL 140, 170, and 250 'Life Series'.
  • Meritor RPL 20 and 25 'Permalube' series.
Check Stock

ABN Extra Large Ball Joint Press Kit Wheel Bearing Press Kit - Universal Ball Joint Separator Tool and Removal Adapters

  • [Easily Service Your Vehicle]: Keep your suspension system running smoothly by replacing worn or rusted ball joints with the ABN Ball Joint Removal Tool Set.
  • Use as ball joint puller kit, control arm bushing tools, U joint press kit, or tie rod and track pin press set.
  • [Fits Your Project]: Ball joint press kit heavy duty 4x4 U joint removal tool kit fits most 2 and 4 wheel-drive domestic and imported cars, pickup trucks, and SUVs with press-fit type ball joints.
  • Ball joint compressor control arm bushing press kit may even fit your tractor.
  • [Built To Last]: Professional-grade forged steel provides maximum strength and durability while the black oxide finish resists elemental damage and wear.
  • Ball joint kit will endure years of heavy use.
  • [Contents]: 11.5-inch (29.2cm) tall extra large ball joint press tool C-frame has 2 interchangeable pressure screws and a 3.5-inch (8.9cm) pressure screw head adapter.
  • Two 3-inch (7.6cm) wide stepped automotive press adapters fit the 10 and 6.5-inch (25.4 and 16.5cm) pressure screws.
  • [Convenient Storage]: 14.5 by 10.3-inch (36.8 x 26.2cm) plastic bl....
Check Stock

OEMTOOLS 25105 Extra Large Ball Joint Press, Heavy Duty Ball Joint Removal Tool, Extended C Frame For Use With Toyota, Chevrolet, Dodge, Ford

  • Extra Large C Frame Press: Essential ball joint tool kit staple for removing press fit parts from pick up trucks.
  • Specialized C clamp makes truck ball joint removal simple.
  • Truck Ball Joint Separator: Ball joint puller tool made for pick up trucks.
  • For use with Toyota Tacoma and Tundra, Chevrolet 2500-3500 and Tahoe, Dodge Ram 2500-3500, and Ford F350-F550.
  • Rugged Frame Strength: Build a stronger master ball joint service kit with this heavy duty forged steel C frame.
  • This extra large ball joint press even removes seized joints.
  • Extended Applications: This heavy duty ball and U joint removal tool features an extended C frame.
  • Compatible with larger ball joint adapters that standard C frame presses won’t fit.
  • Use with Compatible Adaptors: Universal ball joint press does not include ball joint adaptors.
  • Use with OEMTOOLS 37310, 25104, 27023, or 27089 adapters.
Check Stock

Strong Ball Joint,U-Joints and Brake Anchor Pins Press and Removal Tools丨Universal Installation Kit for Pre-pressed Upper or Lower Control Arms

  • This Dynofit U joint and brake anchor pins for Most 2WD and 4WD Cars and Light Trucks, Heat Treated C Clamp Puller is made of high quality material which can excellent press rusted parts effortlessly and it’s not easy to bent..
  • This Ball Joint Press Kits has a wide range of applications, it can not only be used to remove ball joints, but also U-joints and brake anchor pins, the operation is easy which won’t take a long time..
  • Package:10pcs as pic shown in box, 7/8" (22mm)socket recommended, and the exquisite plastic is through heat treated which make the surface more beautiful, you are not only got a set of tool, you also got a nice gift..
  • Well Made: better finish, more smooth screw, flat machined to keep sitting flush against the ball or u-joint, air damping new design thread for little accurate adjustment!.
  • Brand Promise: 1 year warranty, free return replacement or refund if missing parts, thread problems or anything else.
Check Stock

8MILELAKE 6pc Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller

  • [APPLICATION] : This front end service tool allows for easy removal of most popular types of pitman arms, Tie Rods and Ball Joints.
  • [FEATURES] : Press type ball joint separator allows for ball joint removal without damage to boots and other part.
  • [ALL IN ONE] : This Ball Joint Separator, Pitman Arm Puller Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x plastic carry case..
  • [DURABLE MATERIAL] : Durable heavy duty forged front end service tools constructed from heat-treated alloy steel with anti rust plating finish. the jaws are shaped to ensure a positive grip, which leaves your hands free for the pulling job..
  • [PORTABLE CASE] : A plastic carry case is included, keep your tool parts well organized, easy for storage and carry out.
Check Stock

YSTOOL Front End Service Tool Set with Automotive Ball Joint Separator Tie Rod End Puller Pitman Arm Remover 5 PCS Removal Splitter Kit for Car SUV Light Truck Pickup

  • ...h-strength and deformation resistance features, can stand high intensity extrusion. The stout forcing bolts surface adopts black oxidation treatment to prevent rust, grease the bolts up before using for smooth operation and protect the bolt thread, grease them up after using for better preservation..
  • This ball joint puller kit includes 1x ball joint separator, 1x tie rod end and ball joint remover, 1x conical pitman arm puller, 1x pitman arm and tie rod end puller, 1x pitman arm puller, and all the 5 tools are organized in a red blow molding case for easy storage and transportation. The 5PCS remove tools use C-shape, jaw shape and teardrop shape design, very simple, but can seat on the ball joint position tightly and provide very effective grip to fix the pullers..
  • According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts..
  • Ball joints require regular maintenance ....
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

OMT Inner CV Axle Puller Tool Set with 5/8"-18 Slide Hammer & Adapter | Inner CV Joint Removal Tool Kit | Front Wheel Drive Axle Puller Set Compatible with Taurus Sable FWDs from 1986 to 2021

  • PULL CV JOINTS & AXLES: This CV joint puller tool set by Orion Motor Tech is compatible with Ford Taurus and Mercury Sable models from 1986 to present, loosening and removing their front wheel drive axles and hidden retaining rings in minutes.
  • MULTIPURPOSE SLIDE HAMMER: Our slide hammer weighs 7 pounds for extra strength to give you a straight and even pull for damage-free removal of the axle assembly.
  • its threading also lets you use it with other 5/8"-18 adapters to deal with other makes and models or to handle other work around your engine.
  • DURABLE PULLER ADAPTER: The U-shaped CV joint fork has a 2-inch opening and 2.4-inch depth to firmly lock onto your Sable or Taurus axle assembly, making removal of stuck CV joints a cinch.
  • QUICK & EASY OPERATION: These automotive tools work together to provide straight and even force so your constant velocity axle pops out smoothly, leaving the roller bearing inside the joint and the rest of your vehicle untouched.
  • BUILT TO LAST: Made of premium AISI 1045 medium carbon steel, our CV joint removal set provides strong and dependabl....
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ...emove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use lubricating flui....
Check Stock

BTSHUB 5 in 1 Ball Joint Separator Pitman Arm Puller Tie Rod End Front End Service Splitter Removal Tool Set

  • This ball joint separator tool set is designed for removal of most of popular types of pitman arms, tie rods, and ball joints on most compact cars, mid-size cars and light pickup trucks.
  • Press type ball joint separator allows for ball joint removal without damage to boots and other part.
  • Allows for easy removal of most popular types of pitman arms, tie rods and ball joints.
  • Durable heavy duty forged tools constructed from heat-treated alloy steel with anti-rust plating finish.
  • You will get 1x Ball joint separator, 1x Tie rod and ball joint remover, 1x Conical pitman arm puller, 1x Pitman arm and tie rod end puller, 1x Pitman arm puller, 1x Well-organized plastic carry case.
Check Stock

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

DASBET 5pc Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller

  • This ball joint separator tool is made if heavy duty forged alloy steel, with high strength and durability..
  • The tie rod removal tool is designed to easily remove Pitman arms, tie rods, and ball joints..
  • The ball joint separator tool is packed in a plastic carrying case for easy storage and transportation..
  • The 5pcs front end service tool kit is suitable for a wide range of domestic and imported vehicles..
  • Package Includes: 1x Pitman Arm/Tie Rod End Puller 1x Ball Joint Separator. 1x Pitman Arm Puller 1x Ball Joint/Tie Rod End Remover 1x Tie Rod/Inner Bearing Race Puller. All products are 100% brand new. If you think the item you received is used, please contact us for a replacement..
Check Stock

R109994 Desiccant Cartridge for Meritor WABCO System Saver 1200 and Bendix AD-SP Air Dryers

  • Fits all Meritor Style System Saver 2000 or Bendix ADSP Air Dryers.
  • Direct replacement for Meritor R109994 and R950011 desiccant cartridge.
  • Fits all Meritor WABCO 1200 System Saver style air brake air dryers.
Check Stock