Top Type B Rotary Slips Reviews

HiLetgo 10pcs TTP223B Capacitive Touch Switch Module Touch Sensor Switch Digital Capacitive Touch Sensor Switch DC 2~5.5V

  • Model: incremental rotary encoders, AB two phases.
  • Connection: white = A phase, Green = B phase, red = power +, black = 0V Note: AB two -phase outputs must not be connected directly to VCC, otherwise, they will burn the output transistor..
  • Output: AB two -phase quadrature output rectangular pulse, the circuit output is NPN open collector output type ,the output of this type can and with additonal added pull-up resistor(not included) is directly connected MCU or PLC.
  • Encoder size: 38 x 35.5mm/1.49" x 1.39"(D*H).
  • Package content ：1 x Incremental Rotary Encoder.
Check Stock

Hilitchi 120-Pcs [100 to 500K] ohm 3296W Multiturn Trimmer Potentiometer Assortment Kit - [12 Value]

  • knob Size: 14 x 17 mm / 0. 55" x 0. 67" (d*h).
  • material: metal, electronic parts, carbon film.
  • package: 5 x Potentiometer 5 x knobs some x nut parts.
Check Stock

WMYCONGCONG 20 PCS B10K 10K Ohm Knurled Shaft Linear Rotary Taper Potentiometer with Black Knob(WH148) Kit

  • 10k Potentiometer: Single linear rotary taper potentiometer, B10K, 3 terminals, single linear, with standard knob, meet your adjustment needs..
  • Value Marked: B10K Ohm knurled shaft linear rotary taper potentiometer, marked clearly for easy recognition, with nuts, washers and caps for Arduino..
  • Type: single linear(with nuts and washers).
  • Application: Ideal to be used for volume control in audio applications, such as guitar, amplifier, audio, lamp and other audio equipment. Handy and practical pot kits for your DIY projects..
  • Package Content: 20 PCS B10K Potentiometer + 20 PCS Nuts + 20 PCS Washers + 20 PCS Caps. Assorted in a clear box for quick access and storage, very convenient and easy choice to make your rotary taper potentiometer solid and precise when turning..
Check Stock

Rotary 15019 Mower Blade Adapter Kit; Replaces 753-06315

  • Replaces MTD: 710-1044, 736-0524B, 748-0376E, 753-0588, 753-06315.
  • Includes Rotary 14580 (MTD 748-0376E) Adapter, Rotary 1203 (MTD 710-1044) Hex Bolt & Rotary 14755 (MTD 736-0524B) Blade Bell Support Washer.
  • Fits many Walk Behind Mowers 1997 - 2015.
  • PLEASE NOTE: May not fit all specs of above models listed, please consult owner's manual for proper part number identification and proper installation.
Check Stock

10K OHM Linear Taper Rotary Potentiometer B10K Pot with Knob and 3-Pin JST-XH2.54 Connector Lead(Pack of 2)

  • product name：potentiometer；Type : rotary potentiometer single Linear (Type B)；model : wh148.
  • product size：Packaging box Total Size：96.1mm/3.78inx18mm/0.7inx173mm/6.81in.
  • potentiometer Total height: 24 mm / 0. 94".
  • Size of aluminum alloy knob: 14 x 17 mm / 0. 55" x 0. 67" (d*h).
  • Product material：potentiometer is made of metal and carbon film, very stable and durable,The knob is made of aluminum alloy.
  • Application：Widely used for volume control in audio applications, guitar, audio, Suitable for household equipment, personal audio equipment..
  • Product packaging:20pcs B5K B10K B20K B50K B100K Ohm （4Sets for each Value）single linear rotary taper potentiometer+20PCS Aluminum alloy knobs in three different colors+20PCS Washer+20PCS Nut.
Check Stock

Simple Designs LT2060-WHT Geometric Concrete Table Lamp, White

  • Uses 1 x 40W type B candelabra base bulb (not included).
  • Lamp measures L: 6.30" x W: 6.30" x H:10.60".
Check Stock

Simple Designs LT2059-WHT Pinnacle Concrete Table Lamp, White

  • Uses 1 x 40W type B candelabra base bulb (not included).
Check Stock

Simple Designs LT2059-BLK Pinnacle Concrete Table Lamp, Black

  • Uses 1 x 40W type B candelabra base bulb (not included).
Check Stock

TWTADE / 3pcs Wh138 100k ohm Potentiometer Single Turn Rotary Linear Variable Potentiometer +3pcs black Aluminum alloy knob

  • Potentiometer Body Size : 24 x 10mm / 0. 9″ x 0. 39″(D * H).
  • Potentiometer Total Height : 26mm/1. 02″.
  • Rotary Knob Size : 17 x 21mm/0. 67″ x0.83″(H*Max. D).
  • Rated Power: Linear taper B: 0.5W, Other Tapers: 0.25W.
  • Rotational life of the Potentiometer: 10000 Cycles, Rotational life for joystick: 100000 Cycles Min..
  • Package Content : 3 Pcs x Switch Carbon Potentiometer + 3 Pcs x black Aluminum alloy knob.
Check Stock

Simple Designs Petite Faux Stone Table Lamp with Fabric Shade, Gray with White Shade

  • Easily accessible rotary switch located on the cord.
  • Uses 1 x 40W type B E-12 candelabra base bulb (not included).
Check Stock

5 Pcs 10k Linear Potentiometer, 10K Ohm 3 Pin Linear Taper Adjustable Rotary Potentiometer with 7.8 Inch Long Connector Wire Cable and Black Knob Cover Cap for Change Resistance

  • Package Includes: you will get 5 potentiometers with wires (with nuts and washers) and 5 knobs, which are enough to meet your daily use and replacement needs, and you can also share them with family or friends who are in need.
  • Basic Information: product name: single linear rotary potentiometer.
  • Shaft Size: the shaft is 6 mm/ 0.2 inch in diameter and 15 mm/ 0.59 inch in length, and the mounting thread is 7 mm/ 0.3 inch in diameter.
  • You can rotate the shaft to adjust the resistance.
  • Knob Size: it is equipped with a knob for better use, and the black knob is 15 mm/ 0.6 inch deep and 17 mm/ 0.67 inch high.
  • The connector wire is 200 mm/ 7.8 inches long, which can be applied to connect potentiometer and power supply within a certain distance.
  • Wide Application: linear taper rotary potentiometer can be widely applied for photographic lenses, robotics, industrial controls, computer input devices such as trackballs, rotating radar platforms, and controlled stress rheometers.
Check Stock

63 pcs A B C, Logarithmic, Linear, Reverse Log. 1K, 5K, 10K, 20K, 50K, 100K, 250K, 500K, 1M Potentiometer Pot Assortment

  • Product Name :Single linear rotary taper poteniometer.
  • Knob Size: 15 x 17mm / 0.6" x 0.67"(D*H).
  • JST-XH2.54 Connector Wire Length：200mm/7.8".
  • Package Includes：3Pcs With wire potentiometer（with nuts,washers） + 3Pcs Knob.
Check Stock

Grafco Ring Rotary Blade for Standard Finger Ring Cutter - Sharp Stainless Steel Cutting Tool and Remover Device, 1372-4

  • STAINLESS STEEL BLADE: 7/8" rotary jeweler's saw knurled with straight handle, this emergency cutting tool is designed to quickly remove ring from finger safely, easily and with comfort..
  • HIGH QUALITY ROTARY BLADE: Specially designed for Grafco 1372-3 Standard Finger Ring Cutter with safety lever slips under ring to protect the finger from cutting blade and permit rotating razor sharp thumb screw to cut jewelry ring..
  • GENTLE REMINDER: The rotary blade has functional sharp edges that contact with blade may result in injury. Always handle with care & keep blade away from finger and body. Do not pick up product by the blade as improper use may result in injury..
  • INTENDED USE: Use the Grafco 1372-4 Ring Rotary Blade only under the care of a physician. This tool is a specialty instrument used to cut and remove rings from swollen fingers with minimum discomfort & effort. Note: For use on soft metals only..
  • BRAND TRUST: From bandages to sundry jars and everything in between, Grafco products offer healthcare facilities a single source for all their medical-surgical product needs..
Check Stock