Top Two Stage Output Reviews

Kegco Premium Commercial Grade Dual Gauge Two Product CO2 Draft Beer Regulator

  • Dual stage construction & adjustable output pressure. Dual stage construction provides stable output pressure regardless of how much CO2 gas remains inside the CO2 cylinder, eliminating unpredictable catastrophes such as an end-of-tank-dump (EoTD). The output pressure is adjustable from 0-65 PSI based on customers’ different needs..
  • Modular manifold block design. Two manifold blocks are included. Each block comes with its own high-precision needle valve and can be operated independently. You may use one block for one aquarium or use both for two aquariums..
  • Safety and precision in mind. Our regulator has a built-in safety valve. It will open automatically to release the pressure when it exceeds 100 PSI. The integrated needle valve is precise. The CO2 output can be adjusted to as low as 1 bubble every 3 seconds..
  • Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. The solenoid is safe to touch and is very quiet. This solenoid is designed to work with an automatic timer..
Check Stock

Isolation Amplifiers 4.5 - 5.5 SV 8 dB (5 pieces)

  • Isolate and amplify the weak control signal (only a few milliamps of current) by photoelectricity, and finally output a higher power control signal to directly drive the motor, contactor, solenoid valve, etc..
  • The response time is as low as milliseconds and there is no limit on the number of switches. It can directly replace traditional relays, reducing maintenance time and costs..
  • Photoelectric isolation is used between the input stage and the output stage, and the two stages are completely independent, which effectively avoids the instability caused by mutual interference of the system and effectively protects the output node of.
  • Made of high-quality electronic components, stable and reliable performance..
  • Hole punching and PCB module mounting are more convenient..
Check Stock

Samson Stage-412 Quad Handheld VHF Wireless Microphones+2 Wired Mics+Headphones

  • ...es per channel. Up to three simultaneous systems (region dependent). IR sync wirelessly matches receiver and transmitter frequency.
  • 200' (60m) operating range (line-of-sight). AC adapter included. SR412 Wireless Receiver. Rugged metal chassis. Dedicated Volume controls for each channel. Four 1/4" independent channel outputs. Three balanced XLR mixed outputs. VH12 Handheld Transmitters. Four Q6 Dynamic Microphone capsules. Each offers up to 10 hours of life via two AA batteries (not included). Stage 212 Wireless System. Operating Frequency: 173M198M. Number of Frequencies per Channel: 6.
  • Operating Range: 200' (60m). Frequency Response: 8015k Tone Key Frequency: 30k. SR212 Wireless Receiver. Dynamic Range: 100dB. Maximum Output: 1.37V. Output Connectors: Two 1/4" (6.3 mm) unbalanced, three XLR balanced. Audio Output Levels: -12dB. Power Supply: 100-240V, 50/60 0.4A, Output: DC 15V, 800mA. Dimensions: 17" x 6.75" x 1.5" (430mm x 170mm x 40mm). Weight: 3.08lb (1.4kg). VH12 Handheld Transmitters. RF Power Output: 10mW. Microphone Element: Q6 Dynamic.
  • Typical Life: 10 hours. Current Consumption: 120 mA typical. Dimensions (each): 2.16" x 10" (55mm x 255mm). Weight (each): 0.48lb (0.22kg). Includes: DJ1500 headphones. Detachable cable. Soft suede and leather e....
Check Stock

JDM ASTAR Extremely Bright PX Chips 3057 3157 4057 4157 Red Brake LED Bulb

  • Lighting Output：2520 raw lumens, 1260 lumens for each bulb. Color:Brilliant Red.Size: 2.60" long and 0.75" in diameter..
  • Fits: 3156 3056 3356 3456 4156 3157 3047 3057 3357 3457 3757 4057 4111 4157 etc..
  • It is perfect for customers who are looking for a Extremely bright output.
  • The difference between running/tail (stage 1) and brake/signal (stage 2) light is great(the high intensity is about triple birhgter than the low intensity).
Check Stock

JDM ASTAR Extremely Bright PX Chips 7440 7441 7443 7444 Amber Yellow Turn Signal LED Bulbs

  • Color:Amber Yellow.Size: 2.60" long and 0.75" in diameter..
  • Lighting Output：2520 raw lumens, 1260 lumens for each bulb.Fits: 7440 7441 7443 7444 etc..
  • It is perfect for customers who are looking for a Extremely bright output.
  • The difference between running (stage 1) and signal (stage 2) light is great(the high intensity is about triple birhgter than the low intensity).Note....
Check Stock

FZONE Pro Series Aquarium Dual Stage CO2 Regulator Adjustable Output Pressure with DC Solenoid and Integrated High Precision Needle Valve and Bubble Counter

  • Dual stage construction & adjustable output pressure. Dual stage construction provides stable output pressure regardless of how much CO2 gas remains inside the CO2 cylinder, eliminating unpredictable catastrophes such as an end-of-tank-dump (EoTD). The output pressure is adjustable from 0-65 PSI based on customers’ different needs..
  • Modular manifold block design. Two manifold blocks are included. Each block comes with its own high-precision needle valve and can be operated independently. You may use one block for one aquarium or use both for two aquariums..
  • Safety and precision in mind. Our regulator has a built-in safety valve. It will open automatically to release the pressure when it exceeds 100 PSI. The integrated needle valve is precise. The CO2 output can be adjusted to as low as 1 bubble every 3 seconds..
  • Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. The solenoid is safe to touch and is very quiet. This solenoid is designed to work with an automatic timer..
Check Stock

JDM ASTAR Extremely Bright PX Chips 3057 3156 3157 4057 4157 Amber Yellow Turn Signal LED Bulbs

  • Lighting Output：2520 raw lumens, 1260 lumens for each bulb. Color:Amber Yellow.Size: 2.60" long and 0.75" in diameter..
  • Fits: 3156 3056 3356 3456 4156 3157 3047 3057 3357 3457 3757 4057 4111 4157 etc..
  • It is perfect for customers who are looking for a Extremely bright output.
  • The difference between running (stage 1) and signal (stage 2) light is great(the high intensity is about triple birhgter than the low intensity).Note you might need to add 50W 6-Ohm load resistors or change flasher rely to prevent the LED bulbs from hyper flashing..
Check Stock

JDM ASTAR Extremely Bright PX Chipsets 3056 3156 3057 3157 LED Bulbs For Brake Light Tail lights, Brilliant Red

  • Color:Brilliant Red.Size: 2.60" long and 0.75" in diameter. 21-pieces high power PX chipsets per bulb. It is perfect for customers who are looking for a Extremely bright output.
  • Lighting Output：2520 raw lumens, 1260 lumens for each bulb.Fits: 3156 3056 3356 3456 4156 3157 3047 3057 3357 3457 3757 4057 4111 4157 etc..
  • The difference between running/tail (stage 1) and brake/signal (stage 2) light is great(the high intensity is about triple birhgter than the low intensity).
  • Used for turn signal lights,brake lights,tail lights,etc.
Check Stock

REGA Fono MM Phono Stage

  • The new Rega Fono MM phono stage has been designed to be effective, easy to use, and above all, to reproduce music..
  • The Fono MM uses a fully discrete, cascaded, complementary amplifier input stage, a configuration designed to optimise the performance of your moving magnet cartridge..
  • The RIAA equalization has been split into two stages to minimise interaction. Polyester capacitors have been used in the signal path and polypropylene capacitors are used in the RIAA equalization circuits..
  • The aesthetic design of the Fono MM was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MC amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers..
  • Input sensitivity = 1.7mV for 200mV output, Input loading = 47KΩ in parallel with 100pF, Maximum input level = 60mV at 1KHz, Recommended minimum output load resistance = 5KΩ.
Check Stock

Donner Electric Drum AMP 35-Watt Electronic Drum Amplifier & Electric Instrument Cable 10 ft

  • Electric Drum AMP -【Equipped with two speakers】35-Watt Drum Amplifier that with TWO Speakers(LF:8-inch woofer, HF:2.5-inch tweeter, Impedance: 4 ohms ) provides rich tone with intuitive controls.1/4"DI Out:Audio output port, which can be connected to other speakers through audio cable to provide audio input to other speakers..
  • Electric Drum AMP -【Unique-Design for Electronic Drums】Use for Electric Drum practice, street performance, karaoke with friends, band performance, outdoors playing.Frequency response ranges from 20 to 20KHZ.Musical instrument input which can be connected to 'electronic drum', 'keyboard', etc..
  • Electric Drum AMP -【Multi-function Wireless control button】High-Efficiency and Super Durability.Extremely versatile 2-channel Drum amplifier.two inputs with separate volume control for each channel.Controls: 2-Volume, Treble,Middle, Bass.AUX-Volume,Wireless audio connection..
  • Electric Drum AMP -【Two channels】Two 1/4" Instrument Input, 3-Band EQ, 1/8" Auxiliary Input Jack for Jam-Along with Media Player or CD, 1/8" Headphone Output Jack for Silent Practice.DI output port for external active speakers.Audio output port, which can be connected to other speakers through audio cable to provide audio input to other speakers..
Check Stock

UWAYKEY 35W Audio Tube Amplifier with TDA7377 Chip, HiFi Stereo Receiver Integrated Amp with Bluetooth 5.0, Hybrid Amp for Home Theater System

  • ...ers and Class AB power amplifiers. ZK-152H Tube amplifier allows you to taste the "taste" of tube amplifiers at a low price instead of the cold "digital taste" of digital power amplifiers..
  • This tube power amplifier uses the TDA7377 chip, which is a class AB power amplifier chip. The professional fully complementary output stage structure and internal fixed gain ensure that the output is not distorted at high power. We changed the output power of the chip to 35w by means of bridge connection. This output power is not a beautiful figure in the face of digital power amplifiers, but its sound quality is far better than digital power amplifiers, especially when playing human voices..
  • How Many Input Methods Are There: ZK-152H tube amplifier provides two input modes: Bluetooth mode and RCA mode, the switching between modes can be switched by physical buttons. At the same time, the tube amplifier can also input audio signals through AUX 3.5mm..
  • How Many Watt Speakers Are Suitable to Connect to It? We recommend using speakers within 150w, or the size of the speakers should not exceed 6 inches..
  • 7 * 24 Hours After-Sales Service: Focusing on customer experience and satisfying customers is our service tenet. If you have any questions about the product, or product q....
Check Stock

Dead Down Wind Dead Zone Portable Ozone Generator | Scent Eliminator for Hunting Accessories, Odor Eliminator, Small Wind Generator and Wind Checker | Use with Dead Zone Bag

  • DEAD DOWN WIND OZONE GENERATOR: Our All-New 2019 Dead Zone Ozone Generator will truly round out that system and destroy odor for when it matters most. Featuring a Two-Step Cleaning Process, Four-Stage Ozone Output, and Quick-Detach Charging options..
  • MULTIFUNCTIONAL, PORTABLE UNIT: An ozone machine built to travel with a compact design and is made for that next adventure when you want to get in close. Use in Dead Zone Bag, hunting closets, vehicles, and other portable locations..
  • SCENT ELIMINATOR FOR HUNTING: This portable generator has a four stage ozone output. Varying stages of scent elimination (50, 100, 250, 500 mg/hr.). High Output = 500 mg/hr. on High Setting or 250 mg/hr. on Low Setting..
  • LIGHT UP DISPLAY + RECHARGEABLE BATTERY: Heads-up display with battery level indicator, ozone output indicator, timer, and on/off switch. This small generator’s battery lasts between 4 and 8 hours of continual use and Contains 110V / 12V DC charging adapter for your home or vehicle..
  • 2 STEP CLEANING PROCESS with a UV Blue Pretreatment and O3 Ozone. The Dead Down Wind odor eliminator has a multi-functional dual output ports allow for easy distribution form either the front or sides of the unit..
Check Stock

Cable Matters 2-Pack 22AWG Stage Light DMX Cable 25 ft / 7.6m with 3-Pin XLR Connector

  • Lighting cable DMX supports connecting lights, controllers, and other systems at a distance.
  • DJ light controller cable is ideal for connecting stage lighting systems at a large performance venue.
  • 3 pin male to female DMX cable supports connecting DMX OUTPUT sockets to DMX INPUT connectors on DMX512 controller systems to stage lights.
  • EBU cable features additional shielding and better impedance for transmitting digital lighting signals between equipment and a controller system.
  • AES cable is compatible with industry standard equipment.
  • 22 AWG wire of the lighting cable ensures reliable signal transmission.
  • High build quality ensures reliability and durability of the AES/EBU cable for the most demanding venues.
  • 3 pin DMX cable also functions as an XLR cable and microphone cable.
  • Connect microphones and other audio equipment with an XLR microphone cable connector.
  • XLR male to female cable supports standard musical equipment.
  • Cost-effective 2-pack of stage light cables supports two devices.
  • Connect two lights with the DMX light cable or keep a spare on hand.
Check Stock