Top Twin Rod Pneumatic Cylinder Reviews

TAILONZ PNEUMATIC 32mm Bore 25mm Stroke Pneumatic Small Thin Cylinder Aluminum Pneumatic Air Cylinder SDA32-25

【Model】Pneumatic Small Thin Cylinder.
【Working Pressure:】0-1.0mpa | 0-145psi..
【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..

Check Stock

Simlug Mini Air Pneumatic Cylinder, Cdj2B10-30B 10Mm Diameter 30Mm Stroke DoubleActing Stainless Steel Pneumatic Air Cylinder

The pneumatic actuator, The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion..
The pneumatic air cylinder, Made of high quality stainless steel, the pneumatic cylinder has long service life..
This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
It has 10mm cylinder diameter and 30mm stroke, the pressure is 0.15Mpa~1Mpa..
Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage..

Check Stock

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
left-turn-L and right-turn-R are optional..
Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..

Check Stock

CGELE Pneumatic Air Cylinder SC 32 x 200mm PT 1/8, Bore: 1 1/4 inch（32mm）,Stroke:8 inch(200mm) Screwed Piston Rod Dual Action

♥Material:Made of high precision aluminum alloy..
♥Each package includes 1 pcs pneumatic air cylinder(SC32×200)，1 pcs Y-joint ,2 pcs PC4-01,pneumatic tubing 5 meter(4×2.5),1 pcs teflon tape..
♥Product parameters:Port size: PT 1/8,piston rod size:M10X1.25,Bore: 1 1/4 inch(32mm), Stroke: 8 inch(200mm)..
♥Feature:New aluminum alloy material, thickened cylinder, surface electroplating treatment, high strength, not deformed, not easy to corrosion, with fine double seal ring, good sealing, long time smooth not jamming not leak, wear-resistant dust..
♥Widly application:Widely used in printing , semiconductor, automation control, robotics, etc..

Check Stock

MYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair

Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.

Check Stock

MAL Series Aluminum Alloy Mini Pneumaitc Air Cylinder 25mm Bore 200mm Stroke Single Rod Double Acting Air Cylinder with Y Connector and 2Pcs 6mm Pneumatic Quick Fitting

Bore: 1”(25mm) ； Stroke: 8”(200mm) ； Port Size: PT1/8.
Piston Rod Type: Single Rod ； OD: Φ10mm ； Action Type: Double Acting；Buffer Type: Adjustable Buffer.
Fluid: Air ； Pressure Range: 0.1~1.0MPa(14~145Psi).
Material: Aluminium Alloy ；Sealing Ring: Rubber； Working Temperature: -4~158℉.
What You Get: 1 Pcs Mini Pneumatic Cylinder ,1 Pcs Y25 Connector, 2 Pcs x 6mm Pneumatic Quick Fitting. 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..

Check Stock

MAL Series Aluminum Alloy Mini Pneumaitc Air Cylinder 32mm Bore 75mm Stroke Single Rod Double Acting Air Cylinder with Y Connector and 2Pcs 6mm Pneumatic Quick Fitting

Bore: 1 1/4”(32mm) ； Stroke: 3”(75mm) ； Port Size: PT1/8.
Piston Rod Type: Single Rod ； OD: Φ12mm ； Action Type: Double Acting；Buffer Type: Adjustable Buffer.
Fluid: Air ； Pressure Range: 0.1~1.0MPa(14~145Psi).
Material: Aluminium Alloy ；Sealing Ring: Rubber； Working Temperature: -4~158℉.
What You Get: 1 Pcs Mini Pneumatic Cylinder ,1 Pcs Y32 Connector, 2 Pcs x 6mm Pneumatic Quick Fitting. 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..

Check Stock

Aluminum Alloy Mini Pneumaitc Air Cylinder MAL20x300 (20mm/0.8” Bore 300mm/12” Stroke) Single Rod Double Acting Air Cylinder with Y Connector and 4Pcs 6mm Pneumatic Quick Fitting

Bore: 3/4”(20mm) ； Stroke: 12”(300mm) ； Port Size: PT1/8.
Piston Rod Type: Single Rod ； OD: Φ8mm ； Action Type: Double Acting；Buffer Type: Adjustable Buffer.
Fluid: Air ； Pressure Range: 0.1~1.0MPa(14~145Psi).
Material: Aluminium Alloy ；Sealing Ring: Rubber； Working Temperature: -4~158℉.
What You Get: 1 Pcs Mini Pneumatic Cylinder ,1 Pcs Y Connector, 4 Pcs x 6mm Pneumatic Quick Fitting. 30-Days money back guarantee, 1-Year warranty, 24/7 friendly customer service..

Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..

Check Stock

Pneumatic Clamps Pneumatic Clamp 300mm GH-12130 Professional Cylinder Pneumatic Hold Down Clamp

...ference mechanics and dynamics design and the overall structure is ergonomic that the thin, compact fixture is suitable for narrow working spaces. With a total length of 300mm and a maximum clamping force of 230 kg,the Clamp helps to ensure the machining accuracy of the workpiece..
【operate easily】 This Cylinder Pneumatic Clamp provides a smoother operation during repeated clamping operations than manual clamps. The intake port size is M10.The maximum working pressure is 9Kgf / cm2 (0.9mpa) 100PSI, and the movable distance of the clamping rod is 60mm / 2.3in, The Pneumatic Clamping Tool operate easily, and it is easy to realize automatic control..
【Improve efficiency】This Pneumatic Hold Down Clamp is used for positioning, clamping workpiece station. It is powered by compressed air and has the characteristics of labor saving, energy saving and environmental protection. It can shorten test time,and improve production efficiency which reduce labor intensity of workers.Pneumatic clamp is easy to operate and easy to implement automatic control..
【Application】 This Pneumatic Lever Clamp is used for mass production, and the workpiece station that needs to be positioned and clamped can be used. It is commonly used in stations such as welding, gages,....

Check Stock

Pneumatic Clamp, 300mm SC3250 100PSI Professional Professional Pneumatic Hold Down Clamp

SPECS-- Length: 300mm / 11.8in, Air Inlet Interface: M10, Cylinder Specification: SC32*50, Maximum Working Pressure: 9Kgf/cm²（0.9mpa）100PSI, Movable Distance of Clamping Rod: 60mm / 2.3in, Clamp Screw: M8.
ADVANTAGES-- The pneumatic clamp helps ensure the machining accuracy of the workpiece, and can reduce the intensity of labor of workers.
MORE-- Base Fixing Screw: M6 * 4pcs, Base Fixed Screw Spacing: right and left(19mm / 0.7in), up and down(31.8mm / 1.2in, Package Weight: Approx.1084g.
EASY TO USE-- The 300mm professional hold down clamp has simple operation, and is easy to achieve automatic control.
SCOPE OF USE-- This 100psi pneumatic clamp can be used in welding, fixture, mold and other positions.

Check Stock

MXBAOHENG Pneumatic Mixer 5 Gallon Handheld Air Agitator Paint Mixer with 10CM Diameter Aluminum Alloy Impeller for Dye/Resins/Ink Mixing

【Three-cylinder pneumatic motor】The motor speed is adjusted by the air regulating valve. The higher the air pressure, the faster the speed. Equipped with a silencer: it can minimize the sound of the mixer (the noise level of the mixer is related to the opening degree of the air regulating valve)..
【Parameter】Stirring rod length: 40cm, Working pressure: 6-8MPa, Power: 1/8HP, Speed range: 50-2600RPM. It needs to be used in conjunction with an air compressor. Suitable for Air compressor: power: above 3kw, working pressure: 4~6 standard atmospheric pressure (58.78PSI~88.18PSI)..
【Load Safety】It can decelerate or stop automatically according to load changes, and can automatically recover when load decreases.
it can be overloaded, and it will stop running if overloaded for a long time, without damaging, it has a self-cooling effect..
【Closed Design】 Environment friendly pneumatic mixer, can be used in damp, dust and other harsh environments. Working temperature: 10-65 ℃, can be used continuously for 24 hours..
【High Quality】Explosion-proof, small size, light weight, simple operation, the stirring rod and the stirring impeller are corrosion resistant, acid and alkali resistant, removable, etc..

Check Stock

Pneumatic clamp, G18 pneumatic sealing clamp Easy to use Wide application for machining

Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..

Check Stock