Top Turning Tool Lubricant Reviews

Danco Waterproof Silicone Faucet Grease | Silicone Sealant | Plumbers valve Grease for O-rings | 0.5 oz. | 2-Pack (88693)

  • PLUMBERS FAUCET AND VALVE GREASE Ideal for lubricating faucet stems valves and cartridges when repairing a leaky faucet.
  • LUBRICANT GREASE Contains high raw silicone content making it better for long term lubricant hold & helps hard-turning faucets work smoothly.
  • NSF 61 APPROVED designed for use as a waterproof lubricant on faucets valve stems cartridges and is safe for nitrite/rubber O-rings.
  • SAFE No chemical contamination to drinking water Retains its consistency in temperatures from -40 to 400 F.
Check Stock

Pro Grind Sharpening System For Lathe Turning Tools, Chisels, Skews, Gouges, Bowl Gouges, Spindle Gouges and More. Includes the Multi-Grind Jig for Gouges, Slotted Platform and Tool Rest

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning, the results can be undesirable. With the Savannah Carbide Mini Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and with the flat bottom bars on each tool you’ll be able to easily turn most any type of project!.
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting edge. Carbide cutters will stay sharper longer when compared to standard turning tools. However, once needed, the cutters are replaceable. This set includes 2 of each cutter style and extra screws..
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a shearing action as opposed to the traditional cutting method of standard turning tools. The shearing action of this type of turning produces much cleaner cuts and is easier than using standard turning tools..
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long a....
Check Stock

Dow Corning Molykote 55 O-Ring Grease Lubricant, 14g or 0.5oz

  • PLUMBERS FAUCET AND VALVE GREASE: Ideal for lubricating faucet stems, valves and cartridges when repairing a leaky faucet.
  • LUBRICANT GREASE: Contains high raw silicone content making it better for long term lubricant hold, & helps hard-turning faucets work smoothly.
  • NSF 61 APPROVED: designed for use as a waterproof lubricant on faucets, valve stems, cartridges and is safe for nitrite/rubber O-rings.
  • SAFE: No chemical contamination to drinking water. Retains its consistency in temperatures from -40° to 400° F.
  • ODORLESS and COLORLESS: Odorless scent makes this product easy to work with during application and no pigment for clean use.
  • RESISTANCE: The grease is water resistant and oxidation resistant. Silicone faucet grease helps reduce friction and provides long-lasting lubrication.
  • HOUSEHOLD USES: Our silicone sealant can be used to lubricate lubricate door hinges, threads on shower heads & bolts, toilet gaskets and flashlight O-rings.
Check Stock

Danco 88693P Waterproof Faucet O-Rings | Silicone Lubricant | Plumbers Grease | 0.5 oz | 3-Pack

  • PLUMBERS FAUCET AND VALVE GREASE: Ideal for lubricating faucet stems, valves and cartridges when repairing a leaky faucet.
  • LUBRICANT GREASE: Contains high raw silicone content making it better for long term lubricant hold, & helps hard-turning faucets work smoothly.
  • NSF 61 APPROVED: designed for use as a waterproof lubricant on faucets, valve stems, cartridges and is safe for nitrite/rubber O-rings.
  • SAFE: No chemical contamination to drinking water. Retains its consistency in temperatures from -40 to 400 F.
  • ODORLESS and COLORLESS: Odorless scent makes this product easy to work with during application and no pigment for clean use.
  • RESISTANCE: The grease is water resistant and oxidation resistant. Silicone faucet grease helps reduce friction and provides long-lasting lubrication.
  • HOUSEHOLD USES: Our silicone sealant can be used to lubricate lubricate door hinges, threads on shower heads & bolts, toilet gaskets and flashlight O-rings.
Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

  • ●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
  • ●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
  • The 40Cr steel material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
  • ●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • each tool holder has a black oxidized smooth surface..
  • ●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
  • ●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..
Check Stock

YUFUTOL Carbide Tipped Wood Turning tools Lathe set （Finisher/Rougher/Detailer/Hollower Swan Neck Hollower with Solid Wood Handle）and Diamond/Round/Square Carbide Inserts

  • 【Upgraded Carbide Turning Tools Material】High-density tungsten carbide blades are made with high-speed steel blade material which will not wear off easily, stainless steel aluminum handles and a beautiful aluminum alloy case with sponge liner, excellent ergonomics and reliable grip, increased stability and shock resistance.
  • 【Adjustable Aluminum Handle Length】You can freely adjust the length of wood turning tools for lathe according to your preference, just fasten the two screws of the lathe turning tools with the accessory wrench then you can work which is convenient and flexible.
  • 【Replaceable Carbide Blade&Adjustable Sharpe Edges】Our carbide lathe tools matching carbide blades can be replaceable and we provide you with new cutting inserts and maximize cutting life. Each lathe chisel has a tungsten carbide tip with a rotatable, sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge.
  • 【Carbide Lathe Tools Package】You will get 11" tool handle*1, 9.8" connected handle extension*1, 9.8"round turning tool*1, 9.8"diamond turning tool*1, 9.8"square turning tool*1, 9.8"r-shape turning tool*1, interchangeable carbide inserts*8, T15 wrench*1, allen wrench*1,screw*2, aluminum protective case with high elasti....
Check Stock

Urbansential Woodturning Bowl Gouge Set, 3 Pieces 22.5 inch Wood Lathe Turning Tools, 1/4 Flute, 3/8 and 1/2 with High Speed Steel Blades, Beech Handles Brass Ferrules, in Wooden Storage Case

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head..
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter..
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly..
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss..
  • Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539....
Check Stock

Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Heavy Duty Steel Riveted Ferrules and 2 ea Round 2 ea Square and 2 ea Diamond Shaped Carbide Cutters

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know....
  • When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting....
  • Unlike standard wood turning tools, when using carbide tipped cutters, you keep the cutter straight in on the object you are turning. This produces a....
  • Each mini turning tool has a Flush Fit Comfort Grip handle. Each handle is approx. 9-1/8" long and has a heavy duty steel ferrule for added strength....
  • The set includes 1 ea. round tool, 1 ea. square tool, 1 ea. diamond shaped tool, 2 ea. round carbide cutters, 2 ea. square carbide cutters, 2 ea.....
Check Stock

Simple Woodturning Tools 3 Carbide Wood Turning Tools with Rougher Finisher Detailer & 12 Color Coded Solid Aluminum Lathe Tool Handles USA Made

  • These high quality carbide turning tools are American made by Harrison Specialties in Ramsey, Minnesota, a family owned CNC machining and....
  • Easy tool selection with color coded solid aluminum handles. Each CNC machined powdercoated turning tool handle is 1-1/8" outside diameter by 12"....
  • Carbide turning tools feature ultra-sharp replaceable tips, which have multiple sides that can be rotated. Replacing or turning the cutters is easy....
  • Designed with a 3/8" square shaft making it easy to keep tools flat on the tool rest. Overall turning tool length is 9"..
  • Greatly simplifies woodturning with no need for any sharpening equipment..
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

Savannah Carbide Tip Turning Tool Large Size Round Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The round tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

Savannah Carbide Tip Turning Tool Large Size Square Cutter

  • Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind.....
  • All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of....
  • To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The....
  • The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel....
  • The square tool measures appx. 6-9/16" from the tip of the cutter to the ferrule.
Check Stock

OSCARBIDE 3/8

  • Mini Turning Tool holders with 3/8'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock