Top Turning Indexable Insert Reviews

Mini Carbide Tipped Wood Lathe Turning tools Combo set Rougher Detailer Finisher with Wood Handle and Diamond Round Square Carbide Inserts，3pcs

  • Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square11 ×11× 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point).
  • Handle：wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability.
  • Package: Set of 3, Plastic case packaging.
Check Stock

3pcs Mini Carbide Tipped Wood Lathe Turning tools Combo set Rougher Detailer Finisher with Wood Handle and Diamond Round Square Carbide Inserts

  • Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square14×14 × 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point).
  • Handle：wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability.
  • Package: Set of 3, Plastic case packaging.
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set in Fitted Box, 2387-2004

  • 7 piece indexable carbide lathe turning tool set. Shank size: 1/2 inch x 1/2 inch. Overall Length: 4".
  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, parting, part-off, finish turning, facing, external grooving, etc..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action.Insert screw and wrench included.
  • *** Insert kit Item#: 2387-2004INSERTS (Sold Separately on Amazon)***.
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

3PCS 5/8\ CNC Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 3pcs wnmg431, cnmg431, tnmg331 Indexable Carbide Inserts (Right Cutting)

  • ★Package Included：3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ).
  • 3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331).
  • ★Shank Diameter （length×width）: (16*16mm ≈ 5/8"x5/8" ).
  • Overall Length：(100mm ≈ 3-7/8" ) ,Cutting Direction：right hand..
  • ★The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • ★The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
  • ★If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder).
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

GBJ MWLNR 1616H08 5/8\ Lathe Turning Holder + 10PCS WNMG431 Carbide Turning inserts, SER1212H16 SER 1/2\ External Threading Holder +10pcs 16ER 3/8\ AG60 Threading inserts

  • MTJNR 12-3C Right Hand Turning Tool Holder,3/4”Shank ,5” Length ,negative 3 degree lead angle..
  • Turning holder is made of HSS,carbide insert is made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Turning Holders use with TNMG, TNMA, or TNMM-32 style negative inserts.
  • MTJNR 12-3C Lathe Tool Holder,93 degree,clanping& Tool style for turning.
  • MTJNR 12-3C indexable tool holder for external contouring, profiling and facing from light roughing to finishing.
Check Stock

Accusize Industrial Tools 5/8\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0058

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0058INSERTS (Sold Separately on Amazon)***.
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Sandvik Coromant 880-D1200L20-03 Corodrill 880 Indexable Insert Drill, 880.L-03 (01) Tool Style Code, 0.787\ Shank, 20 mm Shank Diameter (Pack of 1)

  • INDEXABLE DRILL: Versatile, carbide insert drilling tool and inserts for excellent tool life and holemaking performance.
  • Patented STEP TECHNOLOGY to deliver excellent cutting force balance and indexable drilling productivity.
  • INSERT SIZE & POCKET POSITIONING: Size 880-01 insert size, Central and Periphery drilling inserts.
  • DRILL SHANK AND TYPE: Cylindrical with flat shank, coolant through the drill, metric design.
  • With CoroDrill 880, you can do more than just drilling a hole. The tool can also be used for helical interpolation, boring, plunging, and turning..
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2004plus

  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Check Stock

Toolly 3/8'' Shank 7 Pcs Indexable Carbide Turning Tool Set, Indexable Turning Tool Holder, C6 Carbide Inserts

  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..
Check Stock

Accusize Industrial Tools 3/8'' Shank 7 Pc Indexable Carbide Turning Tool Set in Fitted Box, 2387-2003

  • Black oxided smooth finish on each turning tool holder style and shank size..
  • Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..
  • Details, recommended cutting speeds and specifications are in the description.
Check Stock