Top Turning 3poems Reviews

STRETCHMAX - Leg Stretching for Ballet, Dance & Gymnastics Training

  • train better with Zenmarkt`s dance turn board.
  • available in Pink and Purple, approx. 6 ounces, 12 inches long and 3.5 inches in width, our turning board will fine-tune your spins.
  • look no further, this is the perfect pirouette board.
  • if you want to master your turns our dance turn board will meet your needs by improving your spotting and allowing you complete rotation.
  • we always like to offer more while focusing on details.
  • enhance your dance equipment with this dance turning board and you won’t regret it.
  • it's the best turning board figure skating accessory.
  • a figure skating spinner that every dancer, ballerina or cheerleader will love.
  • Get the ultimate experience with zenmarkt spin board.
  • as dancers are constantly looking to improve their pirouettes, after months of research Zenmarkt ballet turn board is polished to improve confidence in turning.
  • by reducing friction between the foot and the floor this dance turning board will help dancers get their perfect balance and posture and turn better.
  • with a perfect design Zenmarkt’s ballet spin turning board is suitable for ice skaters, cheerleaders, gymnasts, ballet dancers, and any dancer who wants to gain confidence in the....
Check Stock

Savannah Hollower Replacement Carbide Cutter for Savannah Hollower Carbide Turning Tools

  • Carbide turning tools have a couple of advantages of standard turning tools. One of the most satisfying advantages is that we don’t have to sharpen....
  • Carbide cutters will stay sharper for a longer period of time when compared to standard turning tools. When the carbide cutter finally dulls, simply....
  • Carbide cutters don’t so much cut your wood or material like standard turning tools. The idea is that the razor sharp carbide shears the material to....
  • This cutter comes with two screws that are sized for Savannah turning tools, but depending on your turning tool thread size, you may need to use the....
  • While carbide cutters are designed to be disposed of when they are no longer sharp enough to cut into your material, you can sharpen these cutters by....
Check Stock

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

  • ●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
  • ●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
  • The 40Cr steel material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
  • ●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • each tool holder has a black oxidized smooth surface..
  • ●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
  • ●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

Turning Twenty Orig Just GotBettrBk OigTurnTwentyJustGotBetterNew

  • Turning Twenty Orin Turning Twenty Just Got Better Back.
  • Turning Twenty The Original Turning Twenty Just Got Better New Edition Book- This is the updated version of the best selling original, using current fabrics.
  • Not only does it have the instructions of the original pattern but also contains five new designs with instructions.
  • Product Dimension: 0.13"L x 8.5"W x 11.0"H.
Check Stock

GBJ SRDPN2020K10 (20mm*125mm) + RPMT10T3 45° Lathe Turning Holders Lathe Turning & Profiling Tool Holder for Round Carbide Inserts RPMT10 RPMT08 (SRDPN2020K10 + R5 Inserts)

  • OSCARBIDE Turning Insert Holder TSDNN 2020K 12, Square Shank,Rigid Clamp, 125mm Length,10.3 Width.
  • TSDNN 2020K 12 is a new T-type double style tool holder,it can be accurately, strongly clamp the carbide insert,which is the upgraded style of DSDNN 2020K 12 turning holder.
  • Turning holder is made of Nikel Coated HSS,carbide insert is made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Our External Turning Holder which using the newly developed new double clamping structure, The clamping plate is designed with positioning, anti-turning function and high clamp Tight and rigid, high positioning accuracy, high stability, reliable Now the blade is fast, strong, accurate clamping, is straight The best choice for hole negative Angle blade clamping..
  • Used for external turning, roughing to finishing, but also for internal turning when chip evacuation is good..
Check Stock

The Lathe Of Heaven

  • The VINWOX Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The VINWOX Carbide Lathe Tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
  • Including One set Replaceable Carbide Tip Insert installed on chisel. Rougher: 11.1x11.1x1.75mm 4 sided Square Shape Carbide Tip. Finisher: 12mm Diameter Round Shape Carbide Tip. Detailer: 28x10mm Diamond shape Carbide Tip. Peach Square Radius: 11.3x11.3x1.75mm with 4 sided 2" Arc Square Radius Carbide Tip. Blade images on product picture are only for Clear Vision..
  • 1/2/3/4 Indexed Carbide tip design always offer sharpest edge for turning and maximum cutting life.
  • Top quality and Long cutting life Guaranteed.
Check Stock

5/8\ 2PCS CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1616H16 + SEL1616H16 with 2PCS 16ER/IR AG60 BP010 Indexable Carbide Turning Insert Blade

  • PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
  • Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
  • If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..
Check Stock

Woodturning Carbide Lathe Tools 17” Full Size Wood Turning Tool Set of 3 Rougher Detailer Finisher Includes Replacement Cutter Inserts 6 pcs – Diamond Round and Square Screws and Key Star Wrenches

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of indexable Re....
Check Stock

ASZLBYM 5/8\ 3/4\ Lathe Tool Threading Insert Turning Tool Holder SER1616H16 SER2020K16 SER2525M16 with Indexable Threading Turning Insert 16ER AG60 Cutting Insert Blade (5/8\ (16 * 16mm))

  • ♥ Package includes ：1pcs SER1616H16 + 10PCS 16ER AG60 + 1PCS T15 wrench.
  • ♥Turning holder : The material of the turning tool holder is 40Cr steel..
  • ♥Turning holder specification : shank(16*16mm,16mm ≈ 0.629inch), Overall length : 100mm ≈3.937nch, Cutting direction: right hand.
  • ♥turning insert : 16ER AG60 threading turning insert material is carbide, AG60 60° universal pitch thread insert, machining pitch range: 0.5~3.0mm, for processing : steel parts.
  • ♥Turning insert coating : Nanostructured TIAIN coating combined with fine-grained wear-resistant cemented carbide substrate.
Check Stock

Turning Insert Holder SVVCN 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Neutral, 12mm Width x 12mm Height Shank, 100mm Length.

  • ★Packing : 1pcs MTJNR5/8" , 1pcs MWLNR5/8" ,1pcs MCLNR5/8" ,1pcs SER5/8" turning holder , 4pcs carbide turning inserts and 3pcs wrenches..
  • ★ASZLBYM lathe tool holder set : Shank size: 5/8" inch x 5/8" inch.
  • Overall Length: 4"inch, cutting direction:right cutting..
  • ★Turning holders : turning holder are made of high quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning holder , for long time use..
  • ★Turning inserts : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ★The holders are packed in a premuim aluminium carrying case,easy to carry..
Check Stock

Hollower Swan Neck Woodturning Lathe Tipped Tool Bended Lathe Chisel Tool Hollower with 12mm Round Carbide Insert and a Screw and star key wrench for wood hobbyist or DIY or carpenter, RC-12

  • ✅ CARBIDE WOODTURNING TOOLS - Our lathe turning tools has greatly simplified wood turning, This set of carbide lathe tools is ideal for turners at any skill level, making woodturning fast and more enjoyable. Each lathe chisel features a carbide tip with multiple sharp edges that can be rotated several times, Just rotate the cutter head ¼ turn for a clean, sharp edge and you are back to turning wood..
  • ✅ CARBIDE TURNING TOOLS SET - Premium quality CNC machined from ½” square stainless steel, making them stronger, stiffer and less likely to roll than round shaft tools. Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • ✅ ERGONOMICS TOOL HANDLE - Hard and Solid beech wood，Ergonomics design makes it more comfortable while doing turning job. Unlike the aluminum handle wood turning tool on the market which comes with only one handle, which means you have to change out the bar every time you want to switch tools..
  • ✅ WOODTURNING TOOLS & ACCESSORIES - Set includes 3 turning tools : rougher tip – Square 15 x 15 x 2.5mm R50, detailer tip – Diamond 10x28m with Radius point , finisher, with extra sets of carbide inserts. Set comes with extra replaceable carbide insert: 3 Sets of inde....
Check Stock