Top Turbo Kit For Ls Reviews

Brian Tooley Racing BTR Turbo LS Stage 1 Cam, Spring Kit with Steel Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2 (Camshaft and Spring Set)

Brian Tooley Turbo Stage I Cam includes Spring Kit and 7.400" Chromoly Pushrods.
Turbo Stage I Cam 222/227 .602"/.598" 113+3 and comes a 3 bolt timing gear pattern..
Includes 7.400" LS Chromoly Pushrods, BTR Platinum dual springs, Steel Retainers, Spring Locators.
.505" ID, .060" Thick, LS Valve Seal Kit.
Set of 8 Black Intake Seals and 8 Brown Exhaust, LS VALVE LOCKS 7 DEGREE BEAD LOCK SET OF 32.
When the combination calls for something a little milder, the stage 1 is where to look..
It will let a 4.8 turn 7k rpm with a 7675, and it works great in daily driver 6.0's with 68-72mm turbine wheel turbos that don’t see over 6200. A very well-mannered cam with a noticeable idle but nothing too crazy..

Check Stock

Exhaust Header Manifold For Chevrolet LS1 LS6 LSX V8 Turbo+2 x Elbows T3 T4 To V Band 3.0

Huge 1 3/4" Stainless Primary Tubes (true 1 3/4 unlike the others listing the same header by multiple companies with multiple sizes).
7/16" Thick Flanges 3" V-Band Collectors, CNC Mandrel Bent Pipes for Excellent Flow, 4 to 1 Header Design to Create a Compact Package for Universal.
T3 : hole to hole 45*86mm/T4 : hole to hole 70*83mm/V band Flange 80mm ID 93mm OD.Cast Turbo Elbow Adapter T3 T4 to 3" V-Band SS304.
304 Stainless Steel Cast and Machined Adapter, with Tight Radius. Works for Many Turbo Applications. V band Flange Allows Rotation of the Turbo At Any Angle. Flange Is Threaded with 4 M10x1.5 Holes.
Application : Small Block V8 LS1/LS2/LS3/LS6 LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L.

Check Stock

GSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939

...ration of the engine, and extending the engine service lifespan..
GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion is compatible with Chevy 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines).
Chevy 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines).
Chevy 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines)..
REPLACE PART # - Fuel Filter Regulator Replaces 61633737, 001834890, 1834890 8....

Check Stock

Mophorn Exhaust Header Set 1 5/8 Exhaust Turbo Headers Stainless Steel LS Swap Exhaust Headers Engine Conversion LS Swap Shorty Headers for Chevy LS1 LS2 LS3 LS6 LS7 SUV Camaro Firebird Truck

High-quality Stainless Steel: This exhaust header has premium quality, made of high-strength 304 stainless steel with reinforced interlocking braid....
Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. With mandrel-bent to maintain....
Precise Dimension: With CNC Machined Flanges, 2 1/2" collector, 1 5/8" primaries. This exhaust header set is designed to combine, the exhaust gasses....
Easy to Install & Use: Integrated hardware, gaskets, bolts, and fittings pipes into a powerful turbo exhaust piping system, the pipe kit shows a....
Direct Fitment: It is compatible with for the Chevrolet Camaro Fits Chevy LS1 LS2 LS3 LS6 LS7, adding instant horsepower to the engine, improving....

Check Stock

Z Whip LS 1/8” NPT Oil Port for Turbo Oil Feed Line Auxiliary Oil Supply Billet Adapter Plate LS1 LSX LS2 LS3 Oil Pressure Sensor Oil Cooler Cover LQ4 LQ9 LS6 5.3L 5.7L 6.0L Proudly Made In The USA

Billet 1/8” NPT Oil Port Gives you a place to attach a turbo oil feed line or an aftermarket oil pressure sensor. (Basically, anything with a 1/8”-27 NPT thread).
COMPATIBLE WITH GEN 3 & 4 LS OIL PANS – Z WHIPs oil pressure sensor adapter kit is compatible with all Gen 3 & Gen 4 LS oil pans EXCEPT GTO front sump and LS4 oil pans. LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4.
We are an AS9100D and ISO 9001:2015 Certified Manufacturer. Parts we produce fly at 30,000 feet where failure is not an option..
Proudly made in the USA from Aerospace Grade Billet Aluminum.
When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve.

Check Stock

Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0

Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0.
Cast passenger and driver side manifolds.
-4AN oil feed kit with adapter plate + Hardened stainless hardware.

Check Stock

DNA Motoring GKT-A-2-DP-DNT-GPT-KIT Graphite Aluminum Gasket Plus Donut Studs Bolts Kit,Metallic

1-3/4” and 1-7/8” tubing diameters available for increased exhaust flow increasing performance and improved throttle response.
CNC Mandrel-bent tubes provide consistent tubing diameters for smooth flow and increases the cylinder scavenging effect.
Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
Note: Headers are not equal length, due to the LS cylinder heads being offset approx 1 /2" from the factory Note: Headers do not utilize the factory....
Fitment:Ls Turbo Manifold Fits LS1, LS2, LS3, LS4, LS6, LSX 4.8L, 5.3L, 5.7L, 6.0L, 6.2L V8 engines 1997-2014.

Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

... pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..

Check Stock

Turbo Kit T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0 99+

Chevy Silverado / GMC Sierra LS Single T4 6466 Turbo Kit.
Hi Flow T4 cast passenger and oversized cast driver side manifold.
T4 T70 Trim Turbocharger Cast Passenger T4 Manifold Cast Driver High Flow Manifold Stainless Steel Crossover Stainless Steel 3" Downpipe w/ turndown....

Check Stock

Moroso 62391 0-400 lbs Valve Seat Pressure Tester

All-In-One Solution - COMP Cams Spring Seat and Seal kit offers a convenient kit for replacing the seats and seals on your GM LS engine..
Beehive Ready - The 528-KIT Spring Seat and Seal Kit is ready to accept the GM LS6 and COMP Cams LS6+ Beehive Valve Springs..
Quality Components - The 528-Kit Seat and Seal Kit is made of quality components that ensures durability and dependable sealing capabilities..

Check Stock

Brian Tooley Racing BTR Dual Spring Kit .660' LS1 LS2 LS3 LQ4 Steel Retainers Fits LS1 LS2 LS3 LS4 LS6 L76 L92 L99 LQ4 LQ9 L33 LSA

Brian Tooley Racing BTR Dual Spring Kit .660" Steel Retainers.
This very popular Spring Kit is highly recommended when upgrading to a aftermarket Camshaft.
.660" Lift dual spring kit for LS engines using stock rocker arms..
Included dual polished springs, matching Steel Retainers, locators for stock guides, locks and seals..
Spring specs are 155 lbs @ 1.780", 380 lbs @ 1.180", 400 lbs @ 1.130, coil bind @ 1.070" This is a drop in spring kit for all 15 degree LS heads including LS1 LS2 LS3 LS4 LS6 L76 L92 L99 LQ4 LQ9 L33 LSA..

Check Stock

Akozon 16pcs C5 Filter Fuel Injection Line Fitting Adapter Kit OE: GF822 10299146 19239926 Fit for LS1 LS2 LS6 LS3 LQ4

【Application】The Fuel Line Kit fits for LS1, LS2, LS6, LS3, LQ4, LQ9, LM7, L99, L76, LSX..
【OE Number】Replacing OE numbers for reference: GF822, 10299146, 19239926. Built to meet standard specification, strictly follow factory quality control..
【Practical Accessories】The Fuel Line Kit includes 1pcs C5 fuel filter, 1pcs high pressure fuel injection hose, 1pcs LS fuel rail adapter 5/16, 2pcs LS fuel rail adapter 3/8, 1pcs LS filter connector 3/8 (Already Installed in the Filter), 2pcs AN6-1/4NPS, 2pcs AN6-45° straight fittings, 6pcs AN6-0° straight fittings..
【High Quality】New and quality Fuel Line Kit, manufactured with the highest quality aluminum + rubber material, high strength for maximum durability, high reliability..
【Simple Installation】Simple and convenient to install, no complicated tools required. If you understand your vehicle perfectly, you can choose to install it yourself..

Check Stock

Brian Tooley Racing BTR Turbo LS Stage 3 Cam, Spring Kit with Titanium Retainers and Chromoly Pushrods LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2

Brian Tooley Turbo LS Stage 3 Camshaft, BTR Platinum dual springs with Lightweight Titanium Retainers, and 7.400 Chromoly Pushrods..
Cam specs are:230/235 .616"/.614" 114+4 and comes a 3 bolt timing gear pattern..
When you need a little more RPM than the stage 2 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination..
Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching lightweight Titanium Retainers (faster reving than steel), Locators for stock guides, locks and seals..
Pushrods: 7.400" Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts..

Check Stock