Top Turbo Kit For Chevy 350 Reviews

7.3L Turbo Compressor Wheel & Upgraded GTP38 Rebuild Kit for Garrett TP38 1994-2003 Ford Powerstroke 446579-0001 170293-360° Thrust Repair Kit - 7.3L Turbo Rebuild Kit By TOPEMAI

  • 7.3L Turbo Compressor Wheel & Upgraded GTP38 Rebuild Kit For 1994-2003 Ford Powerstroke,Replaces 170293,446579-0001, 817-1004-002F,....
  • 7.3L Turbo Compressor Wheel Rebuild kit for 2003 Ford E-350,2003 Ford E-350 Club Wagon,2003 Ford E-450 Super Duty,2003 Ford E-550 Super Duty,2000-2003....
  • 7.3L Turbo Rebuild kit for 1994-1998 Ford F-250,1994-1997 Ford F-350,2000-2003 Ford F650,2000-2003 Ford F750,1994-1997 Ford F Super Duty,1999-2003....
  • Turbo Compressor Wheel kit for ford AKA gtp38 turbo compressor kit,Gtp38 turbo upgrade,7.3 turbo wheel,Garrett tp38 turbo rebuild.This Kit Has a 360....
  • Package Include:7.3L Turbo Compressor Wicked Wheel, Upgraded 360 Degree 5 Oil Port Brass Thrust Bearing, Thrust Collar, Thrust Spacer, Front and Rear....
Check Stock

Tektall Power Steering Pump Mounting Bracket for SWP LWP Saginaw GM SBC SB Chevy 283 305 327 350 383 400 with long or short water pump 5230F

  • Top Quality Brand new aftermarket Tektall Black Power Steering Pump Mounting Bracket Replacement, made from solid forged steel to resist failure....
  • Fitment: This kit Fits For SWP LWP Saginaw SB Chevy 350 GM SBC, Fits for Chevy 283 305 327 350 383 400, Fits All SB for Chevy Engines 283 305 327 350....
  • New bushings and installation hardware are included As pictured, Mounts on the Drivers Side Bottom of the engine, these brackets fit the A-CAN Saginaw....
  • Whole steering punmp bracket has been redesigned for greater durability and steability. This whole kit has undergone try-on, corrosion and material....
  • Bracket fits a wide variety of applications due to its low or high mounting positions, Easy installation, no drilling or tapping required. Please do....
Check Stock

LOSTAR 4 x Solid Motor Engine Mount Combo SBC Chevy Frame Mount Rat Rod Hot Street Stock

  • ✅Feature: -This is a Set of Bolt-On Steel Motor Mounts and Chassis Mounts. -This set is designed for Small Block and Big Block Chevy Applications. -Small Block Chevy Engine Mounts replace the upper stock rubber mounts and prevent twist during hard accelerations. -Big Block Chevy frame mount side are directional just like the OEM clamshell type. -All the holes lined up and engine mount bolts went in easily. -These also work great in custom chassis builds..
  • ✅Compatibility: 1974-1981 Camaro & Firebird with 307 & 350, 1973-1988 Chevelle with 307& 350 & 402 & 454, 1973-1979 Nova with 307 & 350, 1976-1990 Impala & Caprice with 307 & 350.
  • ✅Size: -Small Block Chevy Solid Engine Mounts: -Inside to Inside width: 2.5" -Bottom to Center bolt hole: 2" -Frame Motor Mounts: -Overall Length: 6-1/8" -Overall Width: 2-3/8" -Center to center bolt hole length: 5-1/8" -Center to center bolt hole width one: 2-3/8" -Center to center bolt hole width two: 1-3/4".
  • ✅Package Includes: 4 x Motor Mount and Frame Mount Kit.
  • ✅1 Year Unlimited-mileage Quality Guarantee.
Check Stock

GM Parts 12345982 Supercharger Gear Oil

  • Fantastic design places turbo on the passenger side, very strong manifolds.
  • Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.
Check Stock

70" 6AN SS Braided Transmission Cooler Hose Lines,for 700R4 4L60 4L60E 4L65E 4L80E,Compatible with Ford C4/C6/AOD & GM Chevy 1996-2021

  • 【Compatible With】：Applicable to GM turbo 350 (partially 1 / 4 "NPT), turbo 400,turbo 200-200R4,power glide (partially 1 / 4" NPT),700R4,4L60 4L60E,4L65E,4L80E,compatible with Ford C4/C6/AOD & GM Chevy 1996-2021..
  • 【Function】：Improving the cooling efficiency of the vehicle's gearbox helps to avoid heat related faults and thus extends the service life of the equipment..
  • 【70" 6AN Transmission Cooler Lines Kit Includes】：Two stainless steel braided hoses with an inner diameter of about 70 inches and 3 / 8 inches.
  • Four an-6 flared to 1 / 4 inch NPT billet adapters.
  • Two an-6 flared to 3 / 8 "NPT billet adapters.
  • four 90 degree an-6 reverse flared to an-6 flared billet adapters, two aluminum 4l80e adapter accessories..
  • 【Superior Material】：The transmission cooler pipeline kit adopts high-quality 304 stainless steel braided PTFE hose, which has good protection effect, soft, tough and wear-resistant. It is not easy to leak when operating under high pressure..
  • 【After Sales】：Please check the hose and fitting dimensions before ordering.1 ....
Check Stock

TOPEMAI 7.3L Powerstroke Turbo Upgraded 360°Thrust Rebuild Kit Compatible for 1994-2003 Ford Garrett GTP38 TP38 Replacement 817-1004-002F by TOPEMAI

  • GTP38 Rebuild Kit fits 1994 - 2003 Ford 7.3L Powerstroke Turbochargers,for Ford Excursion F-350 Super Duty E-350 Club Wagon F-250 Super Duty E-350....
  • GTP38 Rebuild Kit is durable,upgraded 360 Degree Copper Bar Thrust Bearing,Copper helps dissipate heat much better than the factory steel thrust....
  • 94-03 Powerstroke 7.3L Turbo Upgraded 360°Thrust Rebuild Repair Kit for Ford replace Turbo P/N:817-1004-002F,813-1002-002.
  • With the upgrade turbine side stepped gap piston ring, it can also eliminates the oil leaking problem. Every Item per Garrett Turbocharger Standard....
  • Feel free to contact us by emails if you have any problems..
Check Stock

GSKMOTOR GM TH350 Polyurethane Transmission Mount for Chevy Turbo 350 400 700R4 Rear Mount-RED

  • High-quality OEM replacement of GM Transmission Mount, a perfect replacement for the old broken one..
  • TH350 Transmission Mount FOR Chevy GM Turbo 350 TH400 700R4 Rear Mount Polyurethane..
  • Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
Check Stock

GM 4.3L Turbo Kit Hot Parts T3 Cast 4.3 GMC Chevy Turbocharger V6 Wastegate Oil

  • Fantastic design places turbo on the passenger side, very strong manifolds.
  • Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.
Check Stock

Short Chrome Valve Covers, Compatible with Chevy Small Block 283 350

  • Short Chrome Valve Covers, Compatible with Chevy Small Block 283 350.
  • This kit includes 1 pair of short baffled valve covers. Height 2-5/8" 2 rubber grommets..
  • This kit is compatible with Chevrolet 1958-1986 283-350 V8..
Check Stock

Phoenix USA PGQ64FWL, CLPH2, ONE Front Wheel HUBCAP ONLY, Fits: 08'-Current E350/E450 Van 16\ 8 Lug 4HH and Others (See List) , Stainless Simulator, Cover, Liner, HUB Cap

  • ONE Phoenix Brand Stainless Steel Front Wheel Cover / Hub Cap Mounts to 16” diameter, 4 hand hole, 8 lug applications..
  • Can be purchased as a replacement wheel cover for Phoenix GQ64 or GQ64F sets or can be purchased in multiples..
  • Fits: 08'-Current E350/E450 van 16" 8 lug 4HH, 73'-00' Chevy/GMC C/K30, C/K3500, 71'-02' Chevy/GMC G30, G3500, P-30 van70'-02' Dodge D350, 3500 & 69'-04' Ford F350, 85'-91'E350.
  • Kit includes one front wheel cover PGQ60FWL and Phoenix Logo CLPH2..
  • These are Phoenix Quickliner snap on wheel simulators..
Check Stock

GM4 GM-5 GM-6 GM-8 Reman Chevy GMC 6.5 6.5L Turbo Repair Rebuild Services Kit

  • GM4 GM-5 GM-6 GM-8 Reman Chevy GMC 6.5 6.5L Turbo Repair Rebuild Services Kit.
  • Turbo OEM Number: 12533737 12556124 10241690 12530339 171077 12530339 12533738 10154652 OM366LA 599TC21002000.
Check Stock

PULSAR 03-07 6.0 Turbo Rebuild Kit 6.6 Duramax LLY LBZ Staggered Step Gap Seals

  • 360º thrust bearing vs. stock 270º thrust bearing enhances turbochargers durability..
  • Staggered step gap compressor and turbine ends seal rings reduce oil blow by of the seals.
  • Fits 2003-2007 Ford 6.0L Diesel F250 F350 F450 F550 GT3782VA turbo.
  • Fits 2004.5-2007 GMC/Chevy 6.6L Duramax LLY LBZ Silverado Sierra HD GT3788VA.
Check Stock

T04E 8PC T3/T4 UNIVERSAL TURBO KIT V-BAND TURBOCHARGER WASTEGATE INTERCOOLER

  • Perfect for 4/6 cylinder 1.5L-2.5L engines. Up to 400HP. Power performance output capability = 25-35 psi. CNC machined flanges..
  • 1 x Turbo Oil Return / Feeding Line Kit: Stainless steel braided, it helps circulate oil from the turbo charger to the oil pan.
  • 1 x Intercooler : Size 27” x 7” x 2.5” inch. Inlet size is 2.5 inch. Intercooler core size: 21*7*2.5 . Support up to 350 hp for this small intercooler size – tube and fin style ..
  • balancing Test by TURBOTECHNICS VSR3. G3-min-Flow VNT Turbo testing. Advanced Actuator Tester/Programmer.
  • Need modifications – Professionals ONLY (This is an aftermarket universal turbo kit for DIY purpose, and it’s recommended to advanced players but not for beginners. ).
Check Stock