Top Tungsten Carbide End Mills Reviews

Genmitsu 4pcs 2-Flute Tapered Ball Nose End Mills Tungsten Carbide Cutter with Nano Blue Coat R0.25-1.0 1/8” Shank TB04A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
  • Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
  • Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....
Check Stock

40Pcs End Mill Bits Set 1/8\ Shank, Mcwdoit CNC Router Bits Cutting Milling Tool Engraving Cutter Including Flat Nose/Ball Nose End Mill, Nano Blue Coat/Titanium Coat 2 Flute CNC Router Bits

  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance..
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs..
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
  • 【Parameter】Overall Length（OAL）: 38mm.
Check Stock

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....
Check Stock

Kodiak Cutting Tools L3-OFFT-21LF USA Made Micrograin Carbide Ball Nose End Mill Set, 4 Flute, 1/8\ to 1/2\ (Pack of 6)

  • Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
  • 4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
  • Stub length end mills for extra rigidity.
  • Fitted wood block stand included and each size comes in a marked plastic tube.
  • Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.
Check Stock

CNC End Mill Set, Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm 8pcs

  • 2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
  • Material: Tungsten steel Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry..
  • Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable..
  • Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
  • Package Included：8 x 4 Flutes End Mill Cutter.
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Ball Nose End Mill Assorted R0.75 Tip 1/8\ Tapered End Mill TiAlN Coated CNC Router Bits Carbide Bit CNC Cutter for Carving Engraving

  • [ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
  • [ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
  • [ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
  • [ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
  • [ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

8pcs 2-12mm CNC Square Nose End Mills,Carbide Tungsten Steel 4 Fultes Milling Cutter, Router Bits Rotary Bits Tool Straight Shank 2-12mm

  • 2-12mm End Mill Set: This end mill set includes 8 diameter sizes of 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, satisfy your different needs..
  • Material: Tungsten steel Carbide has the advantages of high hardness, wear resistance, toughness and corrosion resistance. It also has stronger heat resistance than HSS, so it can maintain hardness even at high temperature. Tungsten steel is mainly composed of tungsten carbide and cobalt, accounting for 99% of all components. Tungsten steel is also called cemented carbide and is considered to be the teeth of modern industry..
  • Detail design: High-precision cutting edge with suitable negative forefoot design, taking into account the strength and sharpness of the cutting edge. At the same time, the large core diameter is used to enhance the rigidity of the tool and make the cutting and chip removal stable..
  • Wide Application CNC End Mill：It can be used on many fields, such as metal processing, CNC machining and engineering using. Large chip flute design for smoother chip removal, making the workpiece smoother and brighter..
  • Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
Check Stock

4Pcs Tapered Ball Nose End Mill 0.25MM-1MM with 0.5MM Tip Diameter CNC Router Bits Set 2D 3D Woodworking Tool 2 Flute CNC Router Bits

  • 【High Quality】The end mills are made of ultra-fine tungsten carbide steel alloy, its nano black coating/titanium coating with high hardness and heat resistance..
  • 【End Mill Bits Set】4Pc【End Mill Set】4Pcs ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs.s ball nose bit 2-flute, Nano black coat and titanium coat CNC router bits, will satisfying your different needs..
  • 【Parameter】Ball raidus 0.25mm, 0.5mm, 0.75mm, 0.1mm, flute length:15MM, overall length 1.5 inch, single side angle 5.12°..
  • 【Wide Compatibility】Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing,they are compatible with most desktop CNC machines..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

POWERTEC 15521 Aluminum Oxide Grinding Wheel 80 Grit 8 x 1 with 5/8 Arbor

  • INCLUDES: 8” Aluminum Oxide Grinding Wheel w/ 36 grit.
  • FUNCTION: This wheel works on carbon steel and tool steel (NOT including tungsten carbide, cemented carbide & ceramic tool), making it ideal for tool grinding, smoothing blades and metal working.
  • APPLICATIONS: Works exceptionally well on tools like drills, mills or disposable tips for burring, grinding, stock removal, blending, rust removal, cleaning and finishing.
  • QUALITY SPECS: This aluminum oxide wheel measures 8 inches in diameter, 1” in thickness, comes with a 5/8” arbor hole size, and possesses a 3600 maximum RPM.
  • COMPATIBILITY: Abrasive wheel is designed to fit most 8-inch bench grinder machines.
Check Stock