Top Tungsten Carbide Drills Reviews

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....

Check Stock

10pcs SDS Plus Concrete Hole Saw Kit Extension Shank Mansonry Cement Wall Drill Bit TCT Core Drill Set Tungsten Hole Cutter for Drilling Brick Concrete Cement Stone

[What You Will Get]: 35mm, 40mm, 50mm, 65mm, 82mm and 110mm core drill bits, SDS+ arbors, pilot drills and a 300mm SDS+ extension shank.
[Tungsten Carbide Tip Drill]: This top-of-the-line TCT (tungsten carbide tip) core set offers faster cutting speeds and longer service life, making....
[Technical Application]: 35mm-45mm hole saw extension concrete cement wall drill bit for drilling water pipe and heating pipe, 55mm-80mm drill for air....
[Durable Material]: This sds plus extension shank hole saw drill bits for concrete cement is very solid, using high-quality alloy welding, for the....
[Widely Used]: This masonry hole saw kit easily drills holes on common wall materials, such as brick, adobe, concrete, cement, and stone, widely used....

Check Stock

Blue Boar Master Plumbers Kit-12 Sizes Mega Tungsten Carbide 2-1/4” Hole Saws. Cut 10x Faster, 3x Larger, 40x More Holes Using Cordless Drills. For Plywood, MDF, Particle Board, Hardie Board.

12 Carbide Hole Saws: 3/4", 7/8", 1-1/8",1-3/8",1-1/2",1-3/4",2-1/4", 2-5/8", 3", 3-1/2", 4", 4-1/2".
One 5/8"-18 arbor with 7/16" shank, 1/2"-20 adapter, hex wrench.
NOT NAIL RESISTANT - 3 pilot bits (HSS twist, Carbide Masonry, Tungsten Carbide Tipped for woods).
2-1/4" cutting depth best when USED with 18v Cordless Drill set on SCREW SETTING.
****NOT for use with 1/2" stud drills such as Milwaukee Hole Hawg which will rip the teeth off ****.

Check Stock

DrillForce 10pcs 3/16 inch x 6 inch SDS Plus Hammer Drill Bits, Rotary Hammer Drill Bits , Ideal for Drill Holes into Masonry, Concrete, Brick & Cinder Block.

Package and Size:10 piece. Diameter Size 3/16 inch, Total Length 6 inch..
Heavy Duty: SDS Plus Drill Bit for Rotary Hammers has Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into Masonry, Concrete, Brick & Cinder Block..
Easily & Smoothly Drill:3-4X More into Reinforced Concrete, Brick and Masonry by relying on Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched Ease, Long Life & Safe Drilling..
Carbide Tipped: Bits are carbide tipped for long life in tough applications. Centric conical tip guides bit through concrete and provides optimal hole geometry. Wear mark alerts user when bit is no longer precise. Longer life in rebar vs. standard bits..
IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS-Plus bits for reliable anchoring and sturdy holes. Fit certain Bosch, Hilti, Milwaukee, Makita, Dewalt, and Porter Cable drills and other SDS-Plus Rotary Hammers..

Check Stock

59 Pieces Hand Drill Bits Set Include 49 Pcs Metal Pin Vise Hand Drill Micro Mini Twist Drill Bits and 10 Pcs Tungsten Carbide PCB Rotary Tools for Resin Polymer Wood Craft DIY Jewelry Making Carving

Sufficient and Comprehensive Hand Drill Tools: you will get 49 pieces of manual hand drills, including 1 piece of big pin vise, 48 pieces of small twist drill bits, available in various diameters and lengths, and 10 pieces of tungsten carbide micro drill bits, a total of 59 pieces, adequate and various to satisfy your crafting needs in daily life.
Sturdy and Reliable Material for Lasting Service: the big pin vise hand drill is made of quality aluminum alloy, compact and hard wearing.
The PCB mini drills adopt reliable tungsten carbide, and the micro twist drills are made of alloy steel, hardly rusting or deforming, can be applied repeatedly, serving you for a long time.
A Variety of Functions and Occasions: there are diverse functions for the mini twist drill bits, for example, they can help you a lot in carving, sculpting, drilling, doing well in handling wood, plastic, carbon fiber, composite board, cloth, rubber, bone, glass, stone and more, moreover, the rotary tool vises can process, SMT, PCB, normal FR-4, CEM-3 boards, CNC and so on, improving your working efficiency.
Multiple Sizes for You to Choose: measuring approx. 3.5 inch/ 89 mm in length, the pen drilling vise adopts a 3 claws chuck, equipped with an adjustable clamp, can be adjusted from 0....

Check Stock

HLOFIZI 6 Inch Hole Saw Tungsten Carbide Tipped for Recessed Lights, Drilling Metal, Hardwood, Nail-Embedded Wood, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 6” bi-metal hole saw.
Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass. Also Ideal for recessed lights.
Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
100% SATISFACTION GURANTEED: If you are dissatisfied with our 6 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.

Check Stock

HLOFIZI 1-3/8 Inch Hole Saw (35 MM) with Tungsten Carbide Tipped for Drilling Metal, Hardwood, Nail-Embedded Wood, Stainless Steel, Stucco and Wire Mesh Combination, Plaster, Cement Fiber Board

Tungsten carbide tipped teeth for extended cutting life, drilling clean holes, more efficiently. Up 10X longer life that 1-3/8” bi-metal hole saw.
Drills clean wood, wood with nails, hardy board, aluminum, metal, cast iron, stainless steel sheet, cement fiber board, sheetrock, plastic, fiberglass and more.
Carbide tooth makes cutting holes through stucco/plaster and wire mesh combination, wood and metal combination, faster and easier with less effort.
Clean and smooth cutting, slot for easy plug removal. Comes with arbor and carbide-tipped pilot drills. Arbor: fit 3/8" chuck.
100% SATISFACTION GURANTEED: If you are dissatisfied with our 1-3/8 in. carbide tipped hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our hole saw.

Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....

Check Stock

PANA 3/32\ Loxo Easy Off Mandrel E-File Nail Drill Bit for Sanding Band and Manicure, Acrylics, and Gel Nails (Color: Silver)

Loxo Easy Off Mandrel Bit | Shank Size: 3/32" | Color: Silver | Quantity: 1 Piece.
[MATERIAL] Made with the tungsten carbide and known to be one of the toughest materials on the market. Tungsten carbide is rust resistant, corrosion resistant, and durable for longer lasting use.
[DESIGN] The e-file nail drill bit's shank is the diameter of 0.254" to 0.262" and will fit 3/32" shank size openings on the e-file nail drills.
[USES] Use with various sanding band grits to smooth and buff the nail, nail preparation, polishing, and grinding with the essential e-file nail drill bit.
[MEASUREMENTS] Length: 1.5 Inches | Barrel Size: 0.5 Inches x 0.2 Inches.

Check Stock

ASNOMY 6PCS Large Size Forstner Drill Bit, 1-3/8Inch to 2-3/4Inch Carbide Tipped Forstner Bit for Hard Wood, Wood Drilling Hole Saw Set Woodworking Hinge Cutter Tool Kits for Wood Plastic Plywood

【Top Quality】Made from high quality Tungsten Carbide Tipped Cutters, solid hardened steel body, ensuring its high hardness, rust proof, sturdy and durable；.
【Size】Drilling diameter：1-3/8Inch, 1-9/16Inch, 1-3/4Inch, 2Inch, 2-3/8Inch, 2-3/4Inch, Hex Shank Dia.: 3/8 Inch(9.5mm) , Drilling depth: 2-3/8Inch (60mm), Total length: 3-9/16 Inch(90mm)..
【 Sharp & Clean Holes】This TCT (Tungsten Carbide Tipped Cutters)Forstner bit set perfect for hard wood, can drill precise flat bottom holes with no chipping in Hard Wood or soft wood.(drilling depth up to 2-3/8Inch).
【Widely Applications】Can be used for drilling holes on on wood and plastic products, furniture, door hinge, desk. Used on cutting wood, plywood, solid wood boards, MDF, plastics, etc..
【Warm Tips】Since we are all large-size Forstner Drill bit, it is best to use machines with good fixing performance for drilling operations, such as drilling machines, bench drills, vertical drilling machines and vertical electric drills, etc., if you must To operate with a hand electric drill, it is best to use it togeth....

Check Stock

TCT Hole Saw Set 3pcs JESTUOUS 3/8 Inch Shank Diameter 7/8 1-1/8 1-3/8 Cutting Dia Carbide Tipped Tooth Round Drill Bit Hole Kit Cutter for Stainless Steel Metal Wood

Carbide tipped hole saws are suitable for electric drills and platform drills..
High quality tungsten carbide materail teeth,reduce the damage of tips,increase the endurance,provide a longer service life..
Driling with stainless steel plate,high alloy steel,iron,aluminum,castings,plastic,metal,wood,FRP,etc..
Designed with precision ground,sharp tough gears and stepped pilot drill bit to drilling more precise,smooth,faster and safer,leave perfect cutting results..
Package: 3 hole saws(cutting diameter:22mm/29mm/35mm)+extra 2 pilot drill bits+extra 1 ejector spring with plastic case..

Check Stock

3 Pieces Nail Drill Bits Set, Nail Carbide 5 in 1 Bit, Tapered Barrel Carbide Nail Drill Bit, 3/32 Inches Cone Shape Carbide Bit Carbide Nail Drill Bits for Acrylic or Gel Remover (Golden)

...op of the tapered drill can be applied to trim the surface and sidewall of the toenail and clean under the nail to prevent the entry of ordinary carbide drills and prepare your nails to work more efficiently and quickly without damaging the skin and stratum corneum.
Quality materials: nail drills are made of quality tungsten carbide, durable, high-strength, sharpness, low heat, less dust, corrosion resistance, and can be applied for a long time.
they are also easy to clean, and only need water or water after each use. Alcohol cleaning, regular cleaning will protect the drill bit and extend its service life, convenient for individuals and salons to use anytime, anywhere.

Check Stock

3 Pieces Nail Drill Bits Set, Nail Carbide 5 in 1 Bit, Tapered Barrel Carbide Nail Drill Bit, 3/32 Inches Cone Shape Carbide Bit Carbide Nail Drill Bits for Acrylic or Gel Remover (Silver)

...op of the tapered drill can be applied to trim the surface and sidewall of the toenail and clean under the nail to prevent the entry of ordinary carbide drills and prepare your nails to work more efficiently and quickly without damaging the skin and stratum corneum.
Quality materials: nail drills are made of quality tungsten carbide, durable, high-strength, sharpness, low heat, less dust, corrosion resistance, and can be applied for a long time.
they are also easy to clean, and only need water or water after each use. Alcohol cleaning, regular cleaning will protect the drill bit and extend its service life, convenient for individuals and salons to use anytime, anywhere.

Check Stock