Top Tubing Tool Kit Reviews

Prima Causa HVAC Flaring and Swaging Tool Kit Flares Soft Refrigeration Copper Pipe with Tubing Cutter & Ratchet Wrench

Easy operation, save time and energy. Versatile tool kit in a combination tubing flaring and swaging to fit all your needs.
For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
The special cone eccentric revolution allows the internal opening gradually and accurate from 45° and regual flare without effor, preventing tube....
Eccentric cone will be rebound automatically after the work is finished, make the idle top head in revolution again for 1-2 times and have the flare....
Flaring tool kit is supplied in a Blow Mold Case.

Check Stock

ICOOL Single Flaring Tool & Swaging Tool Kit Brake Line Flaring Tool with Ratchet Wrench & Tubing Cutter for Copper HVAC Water Gas Pipe Brass Magnesium and Soft Steel Lines

【TOTAL PACKAGE】This comprehensive 10 pcs tool kit includes 1 flaring cone, 2 flaring bars, 5 swaging adapters, 1 tube cutter, 1 ratchet wrench and....
【RANGE OF FLARING】Flaring tool applies to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4"O.D. tubing.
【RANGE OF SWAGING】Swage adapters are suitable for 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing.
【OTHER TOOLS】Tube cutter applies to copper pipe/ tubing, HVAC water gas pipe, brass, magnesium and soft steel lines, its cutting capacity is....
【DURABILITY & PORTABILITY】 The flaring tool kit is solid and handy, which is built from the toughest steel and chrome plated. A hard plastic....

Check Stock

Kalolary 2Pcs Drip Irrigation Tubing Hole Punch, Drip Tube Hole Punch Tool Outdoor Drip Irrigation Pipe Hand Punch for 16/20mm PE Pipe Opening Hole Punch

Sturdy and Durable - Made of high quality plastic, this punch is durable, stable and rust. And the puncher has been polished so it will not become dull and can be used for a long time..
Size - Suitable for PE pipes with a diameter of 16/20/25mm, punches holes measuring 3 mm (0.118 Inches), proper size can make sure that sprinklers can snug fit on the tubing for minimizing waste..
2-In-1 Punch and Fitting Insert - Our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use,ergonomic design, easy to operate..
How to use - Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole.
Package - You will receive1 professional punch tool, 1 2 in 1 punch and accessory inserts. Good tools for gardening and irrigation,sufficient quantity for your daily using..

Check Stock

Eastwood 3/16 Die Kit Replacement Brake Line Tubing Flaring Tool 45-Degree Single Double and Bubble Brake Flares

Flare Punch Set For Eastwood Pro Brake Tubing Flaring Tool.
Direct Replacement For Your Worn 3/16” Die Set.
Restores Like New Performance To The Eastwood Pro Brake Tubing Flaring Tool.
This Kit Includes The Op1 Punch Die, The Op2 Punch Die And The 3/16 Inch Die Plates To Make A Complate Kit To Refresh The 45 Degree Turret Head.

Check Stock

IWISS PEX Copper Pipe Ring Crimping Tool Kit for 3/8 in 1/2 in 3/4 in 1 inch Pex Crimp Rings Meets F1807 Standard

Multi-Head PEX Crimp Tool Kit: IWS-FAS copper ring crimp tool kit includes 3 exchangeable die sets(1/2'', 3/8'', 3/4'') and built-in 1'' jaw, Go/No-Go....
Purpose: IWS-FAS F1807 PEX crimp tool kit is designed to compress copper crimp rings to secure PEX or PE-RT tubing to brass or poly crimp fittings.
Capacity: Works with 4 major sizes of PEX tubing - 1/2", 3/8", 3/4" and 1". Factory calibrated and meets ASTM F-1807 standard.
Compatibility: Copper crimp rings (Sioux Chief, Watts, Nibco and other brands). Brass or Poly crimp style PEX fittings. All types and brands of PEX....
Smooth actuation mechanism allows secure connections with minimal force required. Hardened steel construction ensures reliability and durability.

Check Stock

LIAMTU Tubing Flaring Tools Kit Heavy Duty Steel Swage Tool Set Include Pipe Cutter & Ratchet Wrench

ALL INCLUSIVE KIT: LIAMTU tubing flaring tools kit includes all the parts to finish a tubing flaring&swaging work.
WIDE RANGE OF APPLICABILITY: this flaring kit can finish 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. tubing flaring work.
HIGH HARDNESS MATERIALS: the flaring tool, pipe cutter and ratchet spanner are made of the sturdiest steel materials and chromed finished for easy....
SELF-CENTERING YOKE: two bars included covering nine sizes with a self-centering, slip-on forged steel yoke to help form professional and quality....
EASY TO CARRY: all parts can be put into a blue color hand carrying plastic case.

Check Stock

Wostore Flaring Swage Tool Kit for Copper Plastic Aluminum Pipe With Tubing Cutter & Ratchet Wrench

【ALL IN ONE KIT】：The kit includes 1 flaring cone, 2 flaring bars, 5 swage fittings, 1 tubing cutter, 1 ratchet wrench and 1 storage case..
【EXTENSIVE RANGE OF FLARE ADAPTERS】：Flaring tool apply to 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4" O.D. tubing..
【COMMON SWAGE FITTINGS】:Swage fittings are used to 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”,3/4" O.D. tubing, a rugged and durable flaring....
【PRACTICAL TOOLS】:Tube cutter:1/8"-1-1/8" (3-28MM) Pipe, Ratchet wrench:3/16",1/4",5/16",3/8" for square valves, such as valves on hose bibs and....
【DURABILITY AND ACCURACY】:This flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel and chromed for easy....

Check Stock

Cal-Van Tools 165 Master Inline Flaring Kit - Double and Single Flares Brake Flaring Tools Professional Tool Kit

Specifications: this flaring set includes 3/16 in., 1/4 in., 5/16 in. and 3/8 in. double and single flares which are designed to reduce the chance of....
Equipment Design: with compact design, the in-line flaring tool enables the user to flare copper or soft steel tubing in tight spaces. The double....
Flaring Tool Adapters: in-line flaring set is designed to simplify flaring chores. The design locks the adapter's cone and tube in a perfect line....
Tubing Tool Kit: with the clamp and screws laying pressure directly over the tube, there is a great chance of the tube slipping from the clamp.....
Durable Material: flaring kit swivel-type swaging adapters and flaring cone are made of the sturdiest steel materials — perfect for tough job sites.

Check Stock

MASTERCOOL 70058-A Black 45˚ Eccentric Flaring Tool Kit

ALUMINUM DESIGN ensures durability while also being light weight for easy portability.
CREATE 45˚ FLARES in soft copper, brass, aluminum and mild steel tubing.
FLARES SIX SIZES including 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4″ O.D. Tubing.
KIT COMES IN BLOW MOLDED PLASTIC CASE with eccentric flaring tool, inner-outer reamer and heavy duty tube cutter for 1/8 – 1 1/8” O.D. Tubing.

Check Stock

BXQINLENX 8 PCS PETG Tubing Cut and Bending Tool kit OD 14MM ID 10MM (8 PCS)

LENX 8 PCS PETG Tubing cut and bending tool kit.
Bending tool work for OD 14MM ID 10MM PETG Tubing..

Check Stock

Mudder 3 Pieces 2-in-1 Drip Irrigation Hole Punch Tool Drip Tube Hole Punch Fitting Insertion Tools for 1/4 Inch Fitting Emitter Insertion Drip Sprinkler Systems

What you get: you will receive 3 pieces of drip irrigation tubing hole punches in total, come with bright blue colors, sufficient quantity for your daily using.
Durable to use: the drip tube hole punch is mainly made of quality plastic material with material which is not easy to get corroded, sturdy and long lasting use, will bring you a nice using experience.
2-In-1 punch and fitting insert: our irrigation tool kit is suitable for both drip tubing punch and 1/ 4 fitting insertion use, it can help to punch the proper hole for easier operation.
About size: the punch hole measures approx. 3 mm/ 0.118 Inches, proper size can make sure that the pressure in the drip system is suitable and won't waste your materials.
Please confirm whether it meets your needs before buying.
How to use: simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole, very convenient and easy to use.

Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....

Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..

Check Stock