Top Tube to tube Fittings Reviews

Utah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack

straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.

Check Stock

Utah Pneumatic Push To Connect Air Fittings Tube 3/8\ Od Straightair Air Line Union Push Fit Fittings Tube Fittings Air Line Push Connectors 10 Pack(3/8 Straight)

Air Line Quick Disconnect : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.

Check Stock

A-Team Performance - Brake Line Fittings Kit for Inverted Flares — 19 Fittings for 3/16 Tube and 16 Fittings for 1/4 Tube — Zinc-Coated Adapter, Pack of 35

Brake Line Fittings Kit for Inverted Flares — 19 Fittings for 3/16 Tube and 16 Fittings for 1/4 Tube — Zinc-Coated Adapter, Pack of 35.
For 3/16" tube there are a total of 19 fittings (12 x 3/8"-24, 3 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18).
For 1/4" tube there are 16 fittings included (12 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18).
Many local parts stores rent out flaring tools free.

Check Stock

Cimeton 32Pcs Drip Irrigation Tubing Hole Punch & Fittings Kit, Including 2Pcs Drip Irrigation Pipe Hand Puncher 2-in-One Punch Tools with 30Pcs Drip Irrigation Barbed Plugs End Closure Plugs Fittings

❀【Package Included】: Cimeton drip irrigation tubing punch and fittings kit includes 2pcs drip irrigation tube hand punch (1pc professional hole punch and 1pc 2-in-1 punch tool).
and 30pcs drip irrigation fittings: 20pcs straight barbed plugs and 10pcs figure 8 end closure plugs, 32pcs in total. This is a practical tool kit to meet your daily gardening and irrigation needs..
❀【Long-Lasting】: Made of durable plastic, these punch tools and irrigation fittings are sturdy and safe, non-toxic, have well performance of water, UV and chemical resistance. And the hole punchers have been polished so it will not become dull, which ensure a longer service life..
❀【Tube Hole Punchers】: Our irrigation tube punchers are designed to fit for drip tubing punch and 1/4" fitting insertion use, match with PE pipes with a diameter of 16/20/25mm. Punch hole size measures approx. 3mm. These tube hole punchers are mainly used to drill holes when installing drippers and micro sprinklers in PE pipe to ensure proper insertion of fittings, tubing and emitters for a tighter fit..
❀【Irrigation Fittings】: Our straight barbed plugs are designed for quick connecting two side of 1/4" drip irrigation tubing or filling into a 1/2" drip irrigation pipe, and the....

Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
Attention - small 3D printer accessories, please keep away from children.

Check Stock

ANRIWT Air Brake Line Fittings,1/4" DOT Air Fittings Brass Push in Fitting, Push to Connect Union Fittings, Air Brake Union 1/4" Tube OD for Trucks Trailers Use and Industria Workshops (4 PCS)

【PREMIUM MATERIAL】：Our air brake fittings are made of high quality CA360 brass,Meets D.O.T FMVSS 571.106 ,SAE J1131 Air Brake system Requirements and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4" ..
【EASY TO USE】: Union connect two tube with same OD. All dot air quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
【TYPICAL APPLICATION】：Air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair..
【PRESSURE RANGE】: Air brake fittings working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mut....

Check Stock

Racewill 25 ft 3/16 Copper Coated Brake Line Kit Includes 16 Fittings and 4 Unions Brake Line Fittings + Brake Line Double & Single Flaring Tool Kit

MATERIAL：Racewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance.
UPGRADE TO 20 FITTINGS: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
② 10 x 3/16" (3/8-24) Inverted Tube Nut.
③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
RUST AND CORROSION PROOFING：Our 3/16 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions.
MAKE DOUBLE & SINGLE FLARES: Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 1/2", 3/8", 5/16", 1/4", 3/16" O.D. tubing..
WIDELY APPLICATION：Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..

Check Stock

Northern Brewer Stainless Steel Counterflow Wort Chiller

Chill your wort like the professionals do!.
A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.

Check Stock

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
High Quality Material: The connector made of high quality plastic and stainless steel.
corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..

Check Stock

Frienda 12 Pieces 3/8 Inch-24 Threads Brake Line Fittings Assortment for 3/16 Inch Tube (4 Unions, 8 Nuts)

Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines.
Please confirm the size of the details according to the picture before purchasing.
Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance.
You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings.
Inverted flare union: these unions are a nice option to join 2 (3/16 inch) brake lines together.
Brake line fitting connect: the nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24.

Check Stock

HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)

【PREMIUM MATERIAL】：Our push in fittings are made of high quality CA360 brass,Certified by DOT and Air Brake system Requirements,with corrosion resistance, high temperature ductility and low permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4".
【TYPICAL APPLICATION】：The air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections ..
【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).

Check Stock

Utah Pneumatic Push To Connect Air Line Fittings 1/4'Od Union Straight Tube Connector Air Fittings Quick Connect Push Lock Fittings Air Bag Fittings Pneumatic Tube Fittings Plated Brass Push (5 Pack)

SPECIFICATION: Acceptable Fluid : Air And Water Pressure Range: Max Working Pressure: 2mpa | 290psi/ Working Temperature:-20°C—120°C | -4°F—248°F Applicable Tube: PU/NYLON/Soft PE Hose Push Connect Air Fittings Push Fitting.
Installation : push to connect fittings can be done within a short period of time. This tube connector is available in various styles and models Each model to serve its purpose All models of push in connector are designed to suit your pneumatic piping needs perfectly.
Thinking of changing the tube direction after installation ? .Be relaxed . You can easily change the tubing connector direction even after installation. The release ring conforms with the ellipse design to ensure that the disconnecting unit is in good shape.
It's important to note the taper threads on each fitting are properly coated with Teflon for optimal performance of the entire plumbing system.All push to fit, contains internal hexagonal holes.
this enhances the installation of the push connect fittings process in a narrow space.
These Push In Fittings Meet The Pressures And Temperatures Mentioned. Our Connect Push Brass Is More Resistant To High Temperatures We Are Ready To Serve You And Answer Any Questions Related To Our Straight Air We Are Committed To....

Check Stock

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
Teflon tubes are made of premium PTFE material, unique....
Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..

Check Stock