UltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting
- Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
- This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Top Tube Compression Reviews
Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)
- Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
- This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
- 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Quickun Brass Compression Fitting Ferrule Sleeve, 1/8\ Tube OD (Pack of 30)
- Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
- This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
- 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Mueller Sports Medicine Adjustable Max Knee Strap Patella Tendon Support for Men and Women Black One Size
- INTENDED USE: Helps relieve chronic knee pain with targeted compression around your knee.
- FIT: One size fits most. Can be worn on the right or left.
- DUAL STRAPS: Straps are located above and below the knee cap without reducing your mobility.
- COMPRESSION TUBES: Upper compression tube targets quadriceps misalignment to help improve patellar tracking. Lower compression tube targets patellar....
- TRUSTED BRAND: Mueller Sports Medicine has been a trusted leader in sports medicine for over 60 years and is committed to helping you reduce pain.
2pcs Compression Tube Fitting Adapter, Stainless Steel Straight Adapter, Double Ferrule Joint Connector, for Connecting Pipes Fittings(Ф6-Ф14)
- 【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
- 【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
- 【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
- 【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
- 【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..
BTSHUB Engine Compression Tester, 8PCS Engine Cylinder Pressure Gauge for Petrol Gas Engine Automotive Tool Gauge for Car & Truck
- 【APPLICABLE】 Compact with easy to read gauge makes it an ideal accessory for the mechanically minded. Quickly and accurately check compression with this Automotive Compression Tester Kit..
- 【APPLICATION】Compatible for use on petrol engines motorcycles and automotive vehicles. Diagnose and repair problems all in the convenience of your own garage..
- 【PACKAGE INCLUDING】Manometer with two test pressure: 0 - 300 PSI / 0 - 21 kg / CM². Hose overall length: 430mm, pressure tube length: 153mm, angled pressure tube length: 155mm. Pressure gauge diameter: 75mm, four thread size: M10 x 1.0mm, M12 x 1.25mm, M14 x 1.25mm, M18 x 1.5mm. M10 thread is suitable for motorcycles, M12 / M14 / M18 threads are suitable for car..
- 【High Quality】This cylinder compression tester kit is made of durable material for long-lasting use. Checing compression of petrol engines quickly and accurately. It is a professional tool to test the compression in gasoline engine..
- 【EASY STORAGE】Kit comes in a specially designed molded case for easy and safe storage. Included are a variety of thread sizes to suit different nozzle attachments. All products are 100% brand new..
SVBONY SV157 Extension Tube 1.25 inch Optical Length 40mm Total Length 70mm Extension Tube for Telescope 70mm
- SV157 1.25" extension tube can help your eyepiece and camera focus well.
- SV157 1.25" extension tube is threaded at the end to accommodate a standard 1.25" filter.
- SV157 1.25" extension tube is made of all-metal material and has a long service life.
- The inside of the SV157 has full threads to reduce reflected light.
- with a brass compression insh to prevent the marring of your telescope accessories.
KIMISS 51mm/2in Exhaust Middle Pipe, for Suzuki GSX-R600/GSX-R750, Motorcycle Stainless Steel Exhaust Vent Middle Link Pipe with Clamp (K7)
- ...atives of African twins Twin CRF1000L ADV 2016 2019, performance stable, reliable.
- Easy to install Exhaust medium tube is easy to install, there is no fault code when installing the system, no additional tool or device, direct replacement or damage.
- Hydraulic Forming Technology Tube in motorcycles uses tube hydraulic compression product, which injects pressurized water into each tube to form a desirable shape of high quality exhaust stream. Surface gloss, processing process does not cause crease or damage to stainless steel.
- Premium materials exhaust medium tube is made of high quality stainless steel material, cone tube, thickness of 1 mm / 0.04 inches, heat and high temperature resistance, not easy to deform or bend, can be used for a long time.
- Applicable models Exhaust medium pipes are the perfect alternatives of African twins Twin CRF1000L ADV 2016 2019, performance stable, reliable.
- After sales service We are committed to providing the best products and best services. If you have any questions about our products, our professional customer service team will solve your problem in time.
BOLANY MTB Front Fork 26 Inch Ultralight Aluminum Alloy Mountain Bike Suspension Air Pressure Bicycle Pneumatic Shock Absorber Front Fork 4.0 Tire
- ▶Applicable to: Fat Bike, Fat eBike or Snow Bike that uses a straight steer tube. This is a medium-level suspension fork meant to give a better ride....
- ▶ SPECS: For 26" fat bike tires up to 4.0" wide), Weight is Approx 2229g, Fork travel is 120mm. Built-in caliper bung and brake line clip..
- ▶Fully pneumatic compression system: Dial in the amount of fork compression and rebound to get a better ride quality. Unlike most forks at this....
- ▶Inner tube/stroke: good shock absorption, smooth surface polishing for low wear and low resistance..
- ▶Independent front fork bridge design: the outer tube of the front fork is stronger and stiffer, which effectively prevents the inner travel pipe....
Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)
- ✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
- ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
- ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
- ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....
Vacuum Tube Vintage Analog Amplifier, Guitar, Valve Amp T-Shirt
- Performance-ready 30-watt compact combo guitar amplifier with authentic tube tone and touch response.
- Roland comprehensive tube Logic design delivers the interactive tonal behaviors of famous fine-tuned vintage tube amps, including preamp and output tube saturation characteristics, power supply compression, and much more.
- Master volume, three-band EQ, and onboard reverb, plus foot switchable boost for Natural crunch and tone for bright presence.
- Stylish, modern look with a vintage vibe.
- Efficient, lightweight design provides easy portability without sacrificing tone quality.
Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs
- ✅ [QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
- ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
- ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
- ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon t....
Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)
- ✅[QUALITY MATERIAL] Made of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
- ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
- ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
- ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube ....