Top Ttl Chips Reviews

Flashpoint XPLOR 600 HSS TTL Battery-Powered Monolight with Built-in R2 2.4GHz Radio Remote System - Bowens Mount (AD600 TTL) R2 Mark II ETTL 2.4 GHz Wireless Flash Trigger for Sony

  • Flashpoint XPLOR600 TTL 600ws Monolight - 600ws Flashtube with Protective Cover - Standard 7" Reflector - Rechargeable Lithium Battery - AC Battery Charger Set - Compartment Case - Flashpoint 2-Year Full USA Warranty - Flashpoint R2 Mark II ETTL Transmitter - Flashpoint 1-Year Warranty.
  • Guide Number 183 (ft) / 61 (m) ISO 100, with standard reflecto.
  • Built-in 2.4G R2 Radio Remote System Compatible wireless TTL system: Fully supports the Canon E-TTL II, Nikon i-TTL and additional TTL systems in Flashpoint R2 remote system..
  • Integrated professional 11.1V/8700mAh lithium battery pack.
Check Stock

YONGNUO YN-568EX II 4-Channel TTL Flash Speedlite for Canon E-TTL/E-TTL II Cameras

  • In the optical transportation wireless flash shooting, the YN568EX III can be used as a master unit to trigger YONGNUO and C's EX series speedlite(except the YN585EX), and supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash..
  • One YN568EX III can respectively accept the master unit of YN600EX-RT II, YN568EX II, YN568EX III, 600EX(II)-RT, 580EX II, SB-910/900/800/700, Nikon internal flash and Canon commander and wireless signal of 7D/60D/600D, realiszs external TTL, manual flash and stroboscopic flash..
  • High index TTL flash, supports TTL, M, Multi flash.
  • and supports supports automatic & manual zooming, the focal length can be varied between 24-105mm..
  • The YN568EX III can synchronize with all shutter speeds, realize TTL and manual flash, 1/8000s maximum shutter sync.
  • and the recyling time for full output just takes 2 seconds..
  • YN568EX III can be triggered by the camera set-top, PC synchronization trigger and wireless optical trigger off the camera..
Check Stock

Opteka BC-10 Universal Double-Sided 7.5 X 4-Inch Bounce Card for External Camera Flashes

  • ...ool than the built-in flash because of the versatility it gives you..
  • AUTOFOCUS - The Digitalmate flash provides an independent AF assist. When a flash is mounted to the camera, the AF Assist option is enabled. The normal AF Assist light will not be used, instead the flashes autofocus assist system will take effect..
  • TTL - The flash and ambient light are reflected by the subject through the camera lens and then metered by the camera's TTL metering system. The flash power is adjusted accordingly. A digital camera TTL flash system, often known as E-TTL, involves firing a pre-flash before the actual exposure.
  • QUICK SPECS - Full TTL dedication, Backlit LCD screen, Guide number: 130 ft. (40m), Power save mode, Auto temperature control (overheat protection), Fine brightness control, Metal hot shoe, Rapid recycle time (0.2-6 seconds), Works on 2 AA batteries, Memory function (retains previous setting after restart).
  • COMPATIBILITY - NEX 3, NEX 3N, NEX 5, NEX 5T, NEX 5R, NEX 6, NEX 7, A5000, A5100, A6000, A6100, A6300, A6500, A9 APS-C Digital SLR Cameras.
Check Stock

YONGNUO YN600EX-RT II Wireless Flash Speedlite with Optical Master and TTL HSS for Canon

  • Supports optical transmission and wireless radio transmission flash shooting, the YN600EX-RT II can used as master unit to control the flash mode, exposure compensation, flash ratio, number of stroboscopic and stroboscopic frequency..
  • Supports wireless radio transmission flash shooting, cooperate with the YN600EX-RT(II),Canon 600EX-RT(II)/430EXIII,one YN600EX-RT II can used as set-top master unit or remote slave unit,totally 15 channels for option, realize TTL, manual flash and stroboscopic flash..
  • In the optical transmission flash shooting, the YN600EX-RT II can be used as master unit to trigger the YONGNUO and Canon EX series flash (excluding the YN585EX),supports 4 channels, realize wireless TTL, manual flash and stroboscopic flash..
  • One YN600EX-RT II can respectively receive the wireless signal of master unit YN600EX-RT II,YN568EX II,600EX(II)-RT,580EX II, C command and Canon 7D/60D/600D cameras built-in flash wireless signal, realize wireless TTL, manual flash and stroboscopic flash..
  • YN600EX-RT II as professional creative high guide number speedlite, supports TTL/M/Multi flash and can realize TTL, manual flash, the highest shutter synchronous speed is up to 1/8000..
Check Stock

Godox Xpro-C 2.4G X System TTL Wireless Flash Trigger Transmitter & 2 * X1R-C Controller Receiver Compatible for Canon Flash

  • ➤Perfect Combination - Godox Xpro-C TTL Wireless Flash Trigger built-in Godox Wireless X System which can control camera flash,outdoor flash as well as studio flash, when combinate with Godox X1R-C Reciever, it can also control the original compatible for Canon Flashes,Featuring multi-channel triggering and stable signal transmission,perfect combination for studio flash solution..
  • ➤TTL Autoflash - Fully support TTL Autoflsh,1/8000s high-speed sync,Multi flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnetic Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc.
  • ➤Multi-Functional -Can be used as a Wireless Godox Flash Trigger / Wireless Compatible for Canon Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack Support E-TTL II Autoflash and Professional Functions.
  • ➤X1R-C Receiver - Godox 2.4G TTL Wireless Flash Trigger Remote Control Receiver Compatible for Canon with Gr group flash and wireless grouping system (32 channels & 5 groups)and triggering the flash..
  • ➤LCD DISPLAY - Both the Xpro-C & X1R are equipped with large LCD display,offs you convenient operation and make the work more effici....
Check Stock

Godox Xpro-N 2.4G X System TTL Wireless Flash Trigger Transmitter & 2 x Godox X1R-N Controller Receiver Compatible for Nikon Flash

  • ➤PERFECT COMBINATION - Godox Xpro-N TTL Wireless Flash Trigger built-in Godox Wireless X System which can control camera flash,outdoor flash as well as studio flash, when combined with Godox X1R-N Receiver, it can also control the original for Nikon Flashes,Featuring multi-channel triggering and stable signal transmission,perfect combination for studio flash solution..
  • ➤TTL AUTOFLASH - Fully support TTL Autoflsh,1/8000s high-speed sync,Multi flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnet Function, One-Shoot & Multi-Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc.
  • ➤MULTI-FUNCTIONAL - Can be used as a Wireless Godox Flash Trigger / Wireless Compatible for Nikon Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack Support E-TTL II Autoflash and Professional Functions.
  • ➤X1R-N RECEIVER - Godox 2.4G TTL Wireless Flash Trigger Remote Control Receiver Compatible for Nikon with Gr group flash and wireless grouping system (32 channels & 5 groups)and triggering the flash..
  • ➤LCD DISPLAY - Both the Xpro-N & X1R are equipped with large LCD display,offs you convenient operation and make the work more efficient..
Check Stock

NEEWER Q3 200Ws 2.4G TTL Flash (2nd Version), 1/8000 HSS GN58 Strobe Light Portable Photography Monolight with Softbox Diffuser/3200mAh Lithium Battery/500 Full Power Pops/Recycle in 0.01-1.8s

  • 【Pocket Size Flash Strobe】 The NEEWER Q3 is a lightweight and powerful flash, boasting 200w of power at only 626g. The flash is portable and capable of being stored and transported in your pocket. Compatible with Canon E-TTL Nikon i-TTL Sony TTL Cameras, it’s great for travelling photographers..
  • 【Optimized Performance】 Powerful Flash with High GN58 (ISO100, @35mm), 200Ws of Power Adjustable in 8 Steps from 1/128 to 1/1, and flash duration as Short as 1/15380 sec, the 14.4V 3200mAh battery offers 500 full power flashes with 0.01-1.8 sec fast recycling. Cooling vents on both sides for overheat protection and prolonged service time..
  • 【TTL/Manual/Multi Flash Modes】Q3 has three flash modes: TTL, Manual, and Multi (Stroboscopic). Fully Support Flash Exposure Compensation.
  • Manual outputs the user’s choice of power, modeling light, first/second curtain sync, etc. Multi controls the stroboscopic rate up to 90 times (99 Hz). Support S1, S2 mode, C.Fn custom setting, etc..
  • 【Built in NEEWER 2.4G Q system】 Works with QPRO-C, QPRO-S, QPRO-N triggers (not included) which feature 5 groups and 32 channels for easy connection and Q-C/N/S transmitters (not included), fully supports TTL functionality, and can be remotely control....
Check Stock

Godox AD300Pro AD300 Pro TTL Flash Strobe Monolight - 300w 2.4G with 2600mAh Lithium Battery 1/8000 HSS 5600±100K Outdoor Flash Compatible with Nikon Canon Sony Fuji Olympus Panasonic Camera

  • Wide Mount Compability: Godox AD300Pro Comes with a Godox modifier mount to Install Godox-mount Accessories, you can Install Lighter and more Portable Accessories. Purchase the adapter rings of other brands to replace more accessories e.g. Bowens, Broncolor, Profoto, Elinchrom, etc..
  • AD300Pro Outdoor Flash: 300Ws Strong Power, 0.01-1.5s Recycle Time, 320 Full Power Pops, Stable Color Temperature:5600 ± 200k, 9 stop range of power adjusts from full to 1/256 in 1/10th stop increments..
  • 12W Bi-Color Dimmable Modeling Led: Combined with the dimmable, bi-color LED modeling lamp to aid your pre-visualisation, and blent with the ambient light. You can also create short-form video with the 12W continuous light..
  • Lightweight Compact Portable: Godox AD300Pro weights 1.25kg , Dimensions: 7.5×3.9×3.5in. Easy to use buttons command a full range of functions like reliable Channel triggering, Group mode selectivity, HSS. The LCD panel clearly displays the status of all remote Strobes..
  • Great Compatibility: Godox AD300Pro is Compatible with Canon E-TTL II, Nikon i-TTL Autoflash, Sony, FUJIFILM, Olympus and Panasonic TTL Autoflash System. With Master&Slave Function, AD400Pro Can be Used in Combination with Godox TTL Camera Flashes, TTL Outdoor Flashes, etc..
Check Stock

Gowoops GPS Module with 3m Active Antenna for Arduino STM32 51 Single Chip Microcomputer

  • 1. With micro USB port, you can use general mobile phone cable to connect the GPS module to your computer. Do not need USB-TTL, convenien for use..
  • 2. The GPS module has ceramic passive antenna, you can search the satelite in a open area, do not need the external antenna..
  • 3. With SMA port, convenient for connect with the 3m Active Antenna, stronger satelite search ability..
  • 4. With the reserved TTL port, covenient for connect to USB-TTL or external single chip microcomputer..
Check Stock

Godox Xpro-C 2.4G X System TTL Wireless Trigger Transmitter with 2X X1R-C Controller Receiver for Camera,E-TTL II Function,Compatible with 600EX-RT/580EXII/580EX/430EXII/V860C Flash

  • PERFECT COMBINATION - Godox Xpro-C E TTL II Wireless Flash Trigger built-in Godox Wireless X System which can control camera flash,outdoor flash as well as studio flash, when combined with Godox X1R-C Receiver, it can also control the original Nikon Flashes,Featuring multi-channel triggering and stable signal transmission,perfect combination for studio flash solution..
  • TTL AUTOFLASH - Fully support TTL Autoflsh,1/8000s high-speed sync,Multi flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnet Function, One-Shoot & Multi-Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc.
  • MULTI-FUNCTIONAL - Can be used as a Wireless Godox Flash Trigger / Wireless Speedlites Trigger/ Wireless Shutter Release Trigger/ Flash Trigger with 2.5mm Sync Cord Jack Support E-TTL II Autoflash and Professional Functions.
  • X1R-C RECEIVER - Godox 2.4G TTL Wireless Flash Trigger Remote Control Receiver for Nikon with Gr group flash and wireless grouping system (32 channels & 5 groups)and triggering the flash..
  • LCD DISPLAY - Both the Xpro-C & X1R are equipped with large LCD display,offs you convenient operation and make the work more efficient..
Check Stock

2Pack PL2303 PL2303HX USB to TTL Serial Adapter 3.3V Debug Cable USB to RS232 TTL Converter 4 Pin Female Socket Download Cable PL2303HX Cable

  • Specific Interface A: USB 2.0 type A Male Port.
  • Interface B: 4 pin Female Socket flying leads. Prolific chipset on the PCB board....
  • USB to TTL serial cable 3.3V (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND(ground), RX and TX at....
  • TTL to USB Converter Support Windows XP/Vista/7/8.
  • Ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash....
  • Application:PL2303 USB to TTL serial adapter is designed to be used for USB to TTL electronic projects, easy to connects devices with 3.3 V logic....
  • Note: 3.3V and 5.0V output is set (this is the power supply to the microcontroller, upgrade machines do not need the small plate) unplugged from the....
Check Stock

Vivitar FCNIK Flash Cord for Nikon Digital Cameras Black

  • PACKAGE INCLUDES: Flashpoint Zoom Li-on Canon R2 TTL Flash Unit - Li-ion Battery Pack - Battery Charger with Cable - Mini Stand - Protective Case -....
  • Flashpoint Zoom Li-on: Flash Speedlite is Fully support TTL functions, support for TTL auto flash, manual flash, 1/8000 high-speed sync, flash....
  • MOST RELIABLE WIRELESS SYSTEM IN THE INDUSTRY: Flashpoint Zoom Li-on Speedlite Adopts Flashpoints R2 wireless system, built-in 2.4G wireless....
  • LONG LASTING BATTERY: 2000mAh Li-ion Battery, Max. 1.5s recycle time & Approximately 650 full power pops. User-friendly LCD display and control panel..
  • GN60 High Guide Number and 22 Steps of Power Output (1/1-1/128). Auto/Manual Zoom Head from 20 to 200mm. Auto zoom (Flash coverage set automatically....
Check Stock

DIYmall USB to TTL Serial Cable Adapter FTDI Chipset FT232 USB Cable TTL for Arduino ESP8266 Pack of 1pc

  • FTDI based USB to TTL Serial Cable are designed using the the standard FT232BL chipset.
  • Please note that this cable supports very low power devices-5V..
  • It can work with Raspberry Pi serial console.
  • UART interface IC device which handles all the USB signal and protocols.
  • What you will get is : 1 X USB to TTL serial cable.
Check Stock