Top Truss Roofing Reviews

EZBUILDER 7 x 8 Foot Peak Roof Storage Shed Garage Barn DIY EZ Framing Kit with 24 Galvanized Steel Angles and 12 Base Plates (No Wood Included)

• DIY framing kit allows you to create your own 7x8 foot storage shed frame with a peak roof design.
• Wood and finish materials are NOT included.
• Construct with wood or composite 2x4s and add your own roofing and siding to match your home.
• Build whatever size you need: 1 kit for a 7’x8’, 2 kits for 8’x10’, and 3 kits for a 10’x22’.
• Multiple screw points and reinforced truss design provide you with superior strength to your frame.
• Galvanized steel base and angle brackets are 50 percent stronger and won't rust or rot.
• No miters or complex measurements are needed, galvanized angle brackets create the perfect angle every time.
• Only straight, 90-degree cuts are required.
• Kit includes: 24 steel angles, 12 steel base plates, 4 door header brackets, EZ miter template, and easy-to-follow plans.

PORTER-CABLE 15 Degree Coil Roofing Nailer

AMES RESEARCH LABORATORIES MSS1 Maximum Stretch Roof Coating, 1 Gallon, White

• Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
• Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
• 650% elongation – does not flake, chip or peel – elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
• Non-toxic, eco-friendly, low VOC & made in the USA.
• 1 Gallon – Our waterproof roof sealant is packaged in 1 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

• Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
• #14 Sheet Metal roofing screws are galvanized for corrosion resistance.
• Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
• For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
• Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.

CREWTOWER Roofing Nail Gun, 15 Degree 3/4-inch to 1-3/4-inch Pneumatic Roofing Nailer, Heavy Duty Coil Roofing Nailer for Asphalt Fiberglass Shingles Lath Wire Fasterening Wooden Box Assembly

• [Professional Nail Gun]: This roofing tool is made not only to get your work done, but also as a loyal servant to your beautiful life and dreams. This roofing nail gun is the right tool to assist you achieve those goals..
• [Easy to Use]: With easy-to-load magazine, this roofing nailer is easy to load coil roofing nails. The quick-release nosepiece makes it easy to clear jams. Simply turning a wheel, you can adjust the nailing depth, and interchangeable trigger to switch firing mode..
• [Powerful and Efficient]: This powerful air nailer is made of industrial-grade parts, firing engine provides quick response. Comfortable rubber handle and well balanced siding nailer gun body reduces fatigue for long time jobs. Large capacity magazine improves working efficency by minimizing replenishment time..
• [Wide Applications]: This heavy duty coil roofing nailer is ideal for fasterning asphalt and fiberglass shingle, fasterning lath wire on plywood, siding installation and wooden box assembly..
• [Tool Specifications]: The pneumatic coil roofing nail gun weighs only 5.67lbs with aluminium body, load capacity 120 nails, drives 15 degree wire welded coil roofing nails, nail length 3/4" to 1-3/4", shank diameter 0.12", air-powered, operating pressure 70-120PSI..

Ames Maximum Stretch - 4.6 Gallon Waterproof Sealant Membrane - Perfect For Roofing, Repairs, Concrete, EPDM & Wood - Liquid Rubber Sealer - Up To 650% Elastic - Made in USA

• Ames Maximum-Stretch is a white, elastomeric, acrylic, rubberized roof coating & sealant with 650% elongation to resist cracking & peeling. With 88% light reflectivity, the bright white finish reduces surface temperatures resulting in lowered cooling costs..
• Ames Maximum-Stretch adheres to metal roofing, tar, rolled roofs and more. Use as a RV roof sealant, waterproof sealant, rubber roofing material and more. Designed for low-slope roof maintenance..
• 650% elongation - does not flake, chip or peel - elastomeric and rubberized coating and sealant. Rubber roofing material is 88% light reflective resulting in lowered cooling costs. Brush, roll or spray on!.
• Non-toxic, eco-friendly, low VOC & made in the USA.
• 4.6 Gallon - Tintable White - Our waterproof roof sealant is packaged in 5 gallon Pail. Designed for low-slope roof maintenance on metal roofing, built-up roofing, rolled roofing and more..

Metal Roofing Screws 1000 10 x 1-1/2   Galvanized Hex Head Sheet Metal Roof Screw Self Starting Metal to Wood siding Screws EPDM Washer No Paint

• #10 Sheet Metal ROOFING SCREWS.  Our metal roofing screws are galvanized for corrosion resistance..
• 1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
• Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
• Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
• The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.

MIECOO 17PCS Guitar Truss Rod Allen Wrench Set, Includes 7mm & 8mm Truss Rod Hex Box Wrenches and 4mm, 5mm, 6mm Lengthened Ball End Truss Rod Wrenches Repair Tool and Guitar Spanner Wrench

• 【GUITAR REPAIR TOOL KIT INCLUDES】9 x Black Allen Wrench.
• 2 x Black Ball End Truss Rod Wrench (4mm & 5mm).
• 3 x Silver Lengthened Hex Wrench (4mm & 5mm & 6mm).
• 2 x Silver Pocket Truss Rod Hex Box Wrench (7mm & 8mm).
• 1 x Portable Storage Bag. Suitable for guitar, bass, mandolin, banjo and more. Perfect gift idea for guitar lovers, beginners, luthiers..
• 【7MM & 8MM SILVER POCKET TRUSS ROD HEX BOX WRENCHES】made of high quality steel & durable. Fine workmanship, smooth surface with high glossiness. 7mm pocket truss rod hex box wrench fits for Taylor Guitar, and 8mm wrench fits for Gibson Guitar. Long handle length allows easier access to truss rod cavity and easily tighten or loosen the truss rod of your guitar..
• 【3PCS SILVER LENGTHENED WRENCHES】set of 3 including different size: 4.0mm, 5.0mm, 6.0mm. Reach deep areas easily by using the ball end and apply higher force effortlessly by using the short end. Used to drive bolts and screws with a hexagonal head. Use for locking hexagonal screws, adjusting guitar neck truss rod efficiently, etc..
• 【GUITAR MULTI SPANNER WRENCH】made of stainless steel & durable. Used to tighten or loosen most nuts or thumb wheels found on guitars, like output jack, control pot, pickup sw....

3x 5ft Lighting Triangle Bolted Truss 15 span Stand Universal DJ Metal 5 NEW

• MEDIUM DUTY TRIANGLE TRUSS LIGHTING 15' span Adjustable span from 5' to 10' and 15 feet wide!.
• set of (3x) 57" Triangle Bolted Truss. This medium duty triangle truss sections create nearly 15ft span..
• You can mount up to 200 lbs evenly. Truss pipes are 1.5" in diameter. Truss sections are 10 inches in overall width..
• You can create a 57" / 5FT span all the way up to a 171" 15Ft span.
• This listing is just for 3x 5ft Trussing and stands are not included.

Light Truss Stand System by GRIFFIN | I-Beam Trussing Set & DJ Booth Platform Kit | Hanging Mount Lighting Package for Music Gear PA Speakers Can Lights | T-Bar Extension for Portable Audio Stage

• ENHANCE YOUR PRESENTATIONS. A DJ STAND WITH STAGE TRUSS: An ideal stage lighting truss system to offer your performance's unique versatility, with this DJ equipment package with stage lighting stands. Whether you’re a traveling DJ, karaoke jockey, dance performer, rock band, or party host, this deluxe I-beam trussing stand system will help you raise your equipment into the air (up to 13 ft and 4 inches) and focus your lights or effects on the right area to make your presentations stand out!.
• KEEP YOUR GEAR INTACT WITH 2 T BAR LIGHT STANDS: Accommodate any dj booth or dj system with this stage light truss dj package. With two sturdy T-bar tripod stands, a 15 ft I-Beam truss span, 56 different par can hanging points and 40 hanging bolts, this mobile trussing light stand will allow you to hang up to 8 DJ light par cans or speaker per T-bar stand and up to 40 in total. Sturdy, steel tubing, it can hold up to 200 pd.The ideal DJ lighting stand for your DJ light bar or stage equipment!.
• EXTRA EXTENSION TRUSS PIECE FOR STAGE LIGHTS: Featuring an additional, third middle bar extension piece, this professional truss stand system offers you an incredible spread of 180 inches! The highly versatile design of the Griffin Lighting Truss Stand allows you to set it ....

#12x1-1/2' Metal to Metal Type #3 Galvanized/ZINC Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

• #12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
• 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
• Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
• #12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
• Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.

GRIFFIN - Crank Up Triangle Light Truss System | DJ Booth Trussing Stand Kit for Light Cans & Speakers | Pro Audio Lighting Stage Platform Hardware Package | Portable Music Equipment Mount Gear Holder

• KEEP YOUR STAGE GEAR SAFE. A DJ STAND WITH STAGE TRUSS: A DJ equipment package with stage lighting stands which is made of medium-duty steel with a sturdy, steel cable gear system that will easily lift your heavy light cans or PA speakers. Designed with rubber rest pads on the feet to provide sufficient support and stability. This is an extremely durable and long-lasting trussing system, perfect for all your stage lighting needs..
• GIVE YOUR DJ STAGE LIGHTING RIG THE PLACE IT DESERVES: Accommodate any dj booth or dj system with this stage light truss dj package. Hoist your light cans up in the air with this crank up triangle truss stand! With two smooth crank mechanisms (one on each side) and three triangle truss spans, this lighting truss system can reach a total span of 177 inches wide, allowing you to hang up to 200 pounds of equipment. The ideal DJ lighting stand for your DJ light bar and stage equipment!.
• ADJUST TO DIFFERENT HEIGHTS: Featuring two interlocking poles that allow you to adjust the height from 60" to 114" according to your needs, this trussing stand offers unmatched versatility and convenience. Included in the package you will also find 12 metal C-clamps (each rated to lift 44 pounds weight load), so you can mount your lights and other....

#12x1-1/2' Metal to Metal Type #5 (Galvanized/ZINC) Hex Head Drill Point Metal to Metal Roofing Screws. 9/16' EPDM Washer

• #12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
• 250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
• Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
• #12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
• Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".