Top Truck Oil Filter Reviews

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disasse....
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

BISupply Vehicle Service Ramp Set – 6.3in Car Lift 2 Ton Heavy Duty Truck Ramps for Vehicle Maintenance, 2 Pack

  • ...ramps are designed for maximum strength and durability.
  • The textured surface provides superior traction to drive on while non-skid pads on the base help to keep the auto repair ramps from sliding across your garage floor.
  • Features raised tire stop and sides to keep tire in place and grid design to allow moisture to filter through.
  • Each package includes (2) 35.5 inch (90.2 cm) long vehicle lift ramps.
Check Stock

Driven Racing Oil 01707 XP7 10W-40 Semi-Synthetic Racing Motor Oil - 1 Quart, Case of 12

  • Handy 10 quart jugs, it save up to 5 per cent compared to single quart bottles.
  • XP7 provides excellent bearing oil film thickness and high temperature protection compared to conventional racing oils without the higher cost of a full synthetic.
  • XP7 delivers high zinc protection in a semi-synthetic formula.
  • Ideal for Off-Road truck engines, IMCA Modified, Dirt Late Models and 360 Sprints.
  • XP7 can run multiple races on alcohol or race gas before needing to be changed, the oil filter should be changed and top off the oil level after each race.
Check Stock

Channellock OF-1 2-Piece Oil Filer/PVC Plier Gift Set: 12-Inch and 15-Inch

  • Set Includes: 12" & 15.5" Oil Filter/ PVC plier.
  • Accommodates most car, truck and heavy equipment filters.
  • PermaLock fastener eliminates nut and bolt failure.
Check Stock

TOYOTA Genuine OEM 00279-0WQTE-01 Oil (4 QUARTS)

  • STRONG AND DURABLE: This oil filter wrench is made of high-quality aluminum alloy, ensuring strength and durability. The surface of the oil filter cap removal tool is treated with a high quality black anodized finish, anti-rust and anti-corrosion to prolong the service life of the tool..
  • APPLICATION: Install the 64mm 14 flute cup style oil filter wrench on the filter cover, it can clamp and provide maximum torque with multiple contact points to rotate the extremely tight oil filter cover, and cooperate with a 27mm socket or 3/8” (10mm)drive ratchet wrench to loosen it..
  • APPLICABLE MODELS: Oil filter cover removal tool is suitable for most car models, such as Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and More vehicles equipped with 2.5L to 5.7L engine that that use Toyota's cartridge style oil filter system. But the filter wrench does not fit the car with disposable conventional spin-on filters and 1.8L engine oil filter cap..
  • DESIGN: The bottom edge of the oil filter wrench has 4 slots for a perfect match with the vehicles using 15620-31060, 15620-36010, 15620-36020 oil filter housing covers. The tooth-like s....
Check Stock

OEM 25320 2-1/2-Inch to 4-5/8-Inch Oil Filter Pliers/Wrench

  • ADJUSTABLE OIL FILTER REMOVAL TOOL: These adjustable wrench pliers have the jaw capacity to fit spin-on filters from 2-1/2 inches to 4-5/8 inches.
  • Oil filter tool boasts a 20-degree jaw bend for more applications.
  • INTELLIGENTLY DESIGNED: Our filter wrench pliers feature a slip joint handle design that quickly adjusts to various sizes.
  • Oil filter wrench pliers accommodate the most common sizes among car and small engine filters.
  • SECURE GRIP: These engine oil filter wrench pliers come with machined jaw teeth that provide a sure grip without damaging filters.
  • Steel jaws on these oil filter wrenches make it quick and easy to remove even the toughest oil filters.
  • WORK IN TIGHT SPACES: Our automotive oil filter pliers include cushioned handles for safety and comfort.
  • Oil filter remover handles are nonslip, making it the best oil filter wrench pliers for working in tight spaces.
  • BUILT TO LAST: These heavy-duty oil filter adjustable wrench pliers are made of high-quality steel that is designed to last a lifetime.
  • Oil filter puller is designed with professional auto mechanics and heavy-duty applications in mind.
Check Stock

LS Oil Galley Diverter Restrictor Barbell Engine Block Plug Compatible with all GM Chevy 1997-2014 LS Series Engines LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 4.8L 5.3L 5.7L 6.0L 6.2L Vortec

  • Replace your old worn-out LS Oil Passage Diverter to prevent oil seepage or oil bypassing the oil filter. This is also a part that is overlooked when reassembling an engine which will cause little to no oil pressure resulting in engine failure..
  • Compatible with ALL Chevrolet GM LS Series Engines 1997-2014 (99-2013 4.8L,5.3L,6.0L,6.2L Vortec Truck Engines) LS1, LS2, LS3, LS6, LS7, LS9, GM 4.8L 5.3L 6.0L 6.2L. Also Fits LSX LM7 LR4 LQ4 LQ9 L33 LH6 L92 L76 L99 L96 L82 L83 L84 L86 L87 Engines..
  • This installs in the oil galley hole behind the rear engine cover on the rear of the engine on the driver side. Non-O-ring end goes into block 1st. If you are not sure if your rebuilt or fresh rebuild with little or no oil pressure is missing this, you can remove the rear threaded oil galley plug above the oil filter location and see if you can see the shaft of this barbell through the hole. Comes with 1ea oil passage barbell..
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
  • When you purchase Z Whip Parts you will always get the highest quality for you....
Check Stock

AUPREX Oil Filter Wrench 64mm 14 Flute Oil Filter Removal Tool for Toyota,Lexus,Camry,Tundra,Highlander, RAV4, 4 Runner, Scion and Other 2.0L-5.7L Engines with Cartridge Style Oil Filter Housing

  • APPLICATIONS: This oil filter wrench is compatible with Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and other vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. But it is not working on vehicles with disposable traditional spin-on canister filers and the 1.8L engines..
  • HIGH QUALITY MATERIAL: This Toyota oil filter wrench is made of high quality 6061 aluminum alloy which provides a great strength to unscrew without any damages or flex on it. The surface of this oil filter is treated with high quality black anodized finish to prevent corrosion..
  • REASONABLE DESIGN: The 64mm 14 flute oil filter wrench is with 4 teeth on the bottom edge to perfectly match the tabs on Toyota style oil filter housing which can efficiently prevent the slippage while unscrewing the oil filter housing..
  • INSTRUCTIONS: The oil filter wrench can be applied to a 27mm socket or 3/8” drive ratchet wrench to install or remove the oil filter. Simply match the wrench on the oil filter cap and unscrew with a socket or ratchet wrench..
  • EASY TO TAKE THE WRENCH OFF: Compare to some oil filter wrenches which are usually stuck on the cap, AUPREX oil filter wrench is easy to release from the oil filter housing..
Check Stock

VIAIR 20008 200 PSI High-Flow Air Source Kit Black

  • Many uses including train and truck horns, light air tool use, tire inflation and more.
  • Includes pre-installed parts which is as follows, 165/200 PSI automatic pressure switch, drain cock, pressure safety release valve, and 1/2 inch....
  • Comes with the 480C which is a 200 PSI maximum working pressure, oil-less air compressor..
  • Replaceable/relocatable air filter element for harsh environments.
  • This system does not come with air horns or an air hose. Those items must be purchased separately..
Check Stock

68105583AF Oil Filter Adapter Housing Assembly for 2014 2015 2016 2017 2018 Chrysler Dodge Jeep Ram 3.6 V6 Pentastar Replaces 68105583AA 68105583AB 68105583AC 68105583AD 68105583AE

  • [Replacement Oil Filter Adapter Housing Assembly]: Oil leaks are common in many vehicles-oil can leak past through different parts. One of the most common sources of oil leak is the oil filter housing, the component that surrounds the oil filter. The oil filter assembly housing contains the oil filter for your vehicle. It allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • [Fit the Following Vehicle]: Fit for 2014 2015 2016 2017 2018 Chrysler Dodge Jeep Ram 3.6L V6 Pentastar, including Chrysler 200, 300,Town & Country | Dodge Avenger, Challenger, Charger, Durango, Grand Caravan, Journey | Jeep Cherokee, Grand Cherokee, Wrangler, Wrangler JK | Ram 1500, C/V, Promaster 1500 2500 3500..
  • [Replaces Part Number]: Replaces Mopar 68105583AF 68105583AA 68105583AB 68105583AC 68105583AD 68105583AE, include Oil Filter, Temp Sensor, Bypass Valve, Spring, and Gaskets..
  • [OEM Quality & High Performance]: This Oil Filter Adapter Housing Assembly is designed to MEET or EXCEED standards of original factory Engine Oil Filter Adapter. Guaranteed Exact Fit for PLUG & PLAY. Manufactured from quality materials, 100% tested before shipping..
  • [LIFETIME WARRANTY]: Order from KONDUONE, we offer LIFETIME WARRA....
Check Stock

Motivx Tools Oil Filter Wrench and Drain Tool Set for Toyota & Lexus 2.0L - 5.7L Engines With Cartridge Style Oil Filter Systems

  • This is a bundle package containing both the Motivx Tools cartridge style oil filter wrench and oil filter drain tool for Toyota and Lexus vehicles..
  • Included are the Motivx Tools MX2320 oil filter wrench and MX2341 oil filter drain tool. These tools are for use on 2.0L - 5.7L engines that use the new cartridge style oil filter system. They do not work on standard spin-off style oil filters..
  • Works on many late model Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza Toyota vehicles..
  • Includes a Toyota oil filter wrench for removing the oil filter housing cap and a oil filter drain tool for draining the filter housing before removing..
Check Stock

Diesel Laptops Handheld Heavy-Duty Diesel Diagnostic Scan Tool with DPF Regen

  • 【Extra Saving-BST200 Battery Tester & Official Protective Case】We offer a BST200 Battery Tester or ANCEL Official Protective Case to encourage all of you to try this 2023 newest heavy duty truck scanner ANCEL HD3300 HD. Just click "Promotion Available" below the price and add both to your cart. Warm tip: first come, first served!.
  • 【2023 Most Cost-Effective Truck Diagnostic Tool】HD3300 HD heavy duty truck scanner is an improved version of ANCEL's truck scanners that maintains the stable performance of most truck scanners and becomes even more valuable with improved compatibility and convenient features. Supports DPF regeneration, oil service reset, OE-level full diagnosis for almost all trucks, lifetime free update via Wifi, features Android touch screen. It is an indispensable diagnostic tablet for truck owners..
  • 【Enhanced DPF Regen Tool】Supports exclusive OEM-level DPF functions Fit for Cummins, Detroit, Caterpillar, Paccar, International, Volvo, Isuzu, Fuso, including DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, helps you better solve the exhaust aftertreatment system probl....
Check Stock