Top Tru Lok Differential Rear Axle Reviews

Rancho RockGEAR RS6242 Skid Plate

  • COMPATIBILITY -- Works with OE and most aftermarket differential covers on Jeep Wrangler JK, Dana 44.
  • BUILT FOR THE TRAIL -- Protects differential casting from rocks and other obstacles while off-roading, rock crawling and trail riding.
  • GLIDES OVER OBSTACLES -- Mounts to Dana 44 rear axle casting for a much smoother glide over obstacles both forward and backward.
  • RESISTS CORROSION -- Durable red powder-coat finish resists rust and corrosion.
  • ENGINEERED TO LAST -- Features 0.25-in. high-strength, low-alloy steel construction for long-lasting strength.
Check Stock

Axial RC Truck 1/10 RBX10 Ryft 4WD Rock Bouncer Kit, Gray, AXI03009

  • Solid front and rear axles with realistic metal differential covers.
  • Long travel front and rear oil-filled shocks.
Check Stock

Lubegard 60902 Automatic Transmission Fluid Protectant, 10 oz. , RED

  • Rear Drive Shaft Axle Assembly For 2004-2008 Ford F-150 RWD 4.2L 4.6L 144.7 or 144.5 Wheel base, w/10 Bolt Differential Cover.
  • Shaft Length Compressed (in): 90 3/4" | Shaft Diameter (in): 2-7/8 Inch | Measure the Length to Confirm before Order.
  • This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints..
  • Ready to install - this drive shaft arrives pre-balanced to make installation quick and simple.
  • 100% new - this drive shaft is made from all new components so there's no core charge or return hassle.
Check Stock

TAMIYA 1/10 4 Wheel Drive Toyota Supra Racing A80 TAM47433A Cars Elec Kit 1/10 On-Road

  • Type 540 Motor included (Compatible with kit-included motor or Item 53689 540J Motor only).
  • Front Suspension: Double Trailing Arm, Rear Suspension: Swing Axle.
Check Stock

Bang II (Feat. Uppercase 5ive)

  • Fully milled gearbox housing made of 6061-T6 aluminum for the rear axle of ATOPRC.
  • Due to its dimensional stability results in a higher load capacity and service life of bevel gear and ball bearings. The problem of the torn fastening thread has an end with this case.
  • The bearing adapters are included in the set.
  • We recommend gluing the bearings with threadlocker y0113. For mounting the bearing adapters in the housing we recommend Bindulin silicone y19015. To use HD differential shafts y1477, the Atoprc bearing adapters must be machined.
Check Stock

A-Premium Rear Complete Drive Shaft Prop Shaft Driveshaft Assembly Compatible with Ford F-150 2004-2008, Lobo 2007-2008, RWD, Replace# 8L3Z4R602E

  • [Vehicle Fitment-1]: Compatible with Ford F-150 2006-2008 V6 4.2L(144.5 Inch Wheelbase), Compatible with F-150 2005 V6 4.2L(144.7 Inch Wheelbase) --- RWD.
  • [Vehicle Fitment-2]: Compatible with Ford F-150 2006-2008 V8 4.6L(144.5 Inch Wheelbase), Compatible with F-150 2004-2005 V8 4.6L(144.7 Inch Wheelbase), Lobo (Mexico) 2007-2008 V8 4.6L(145 Inch Wheelbase)---RWD.
  • [Reference Number]: 936-803, 65-2013, 936803, 652013, 8L3Z4R602E.
  • [Product Description]: ①Length: 92 inch.
  • [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
  • Being sturdy and brand-new, this drive shaft is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

DV8 Offroad Rear Differential Skid Plate for 2021-2022 Ford Bronco | Paintable Aluminum Inserts | Quick & Easy Installation | Multiple Drain Holes | Bolt-on Installation | Black Finish

  • Upgrade - Our system will help to prevent you from getting caught up on rocks. Multiple drain holes are in several locations to release any water or mud that might collect in the skid plate.
  • Strength - Protects all aspects of your Bronco’s Rear Differential like Gasket Seal, & Pinion. In addition to protecting the full length of your Rear Axle & Upper Link Mounts.
  • Install - Utilizing the provided hardware, install is a smooth process and can be completed with 1-2 people. It takes approximately 1 hour to install. The install guide can be downloaded below!.
  • Fitment - This was engineered to work with the original factory diff covers. This may not fit with aftermarket diff covers.
  • Compatibility - DV8's Rear Differential Skid Plate is compatible with 2021 & 2022 Ford Bronco 6th Gen. Our skid plate fits all 2-door & 4-door Broncos.
Check Stock

00295-01281

  • Sets to form an elastic body which is not affected by vibration or impact.
  • Maintains a stable rubber body over an operating temperature range of -76°F to 482°F.
  • Highly resistant to engine oil, various chemicals and coolant.
  • Can be used on the transmission cover, clutch housing, differential cover and carrier, extension housing, front bearing, ring retainer and rear axle shaft connection.
Check Stock

REPLACEMENTKITS.COM - Brand Fits Polaris Rear Differential Gear Case Seal Replaces 3610146 -

  • Fits 2009 -2016 Ranger. RZR 800, RZR 800 S & the RZR 800 4.
  • Rear Differential Gear Case/ Axle Seal is an exact cross and replaces the Polaris OEM P/N 3610146, 026HH115, 3610117, 3610159.
Check Stock

TDPROMOTO 48V 1000W Electric Differential Motor 30 inches Rear Axle 6 inches Tire for Go Kart Quad Trike Golf Carts.

  • Made of high quality material, super durable to use..
  • 40" Differential Rear Axle Drive Shaft kit..
  • For Kids 50cc 70cc 110cc Quad Bike ATV Dune Buggy..
  • Speed controller for DC Motor, up to 1800W, 48Volts . This can be used for any other wattage lower than 1800W for e-scooters, e-bike, e-ATV..
Check Stock

Lesu 1/14 Metal Hydraulic Rc Backhoe Loader Aoue Bl71 2 in 1 Electric Excavator

  • Front and rear aluminum alloy wheels, high-quality rubber tire covers, full drive 4 * 4 power differential locking axle, and the reduction ratio of front and rear axles is 1:2.7..
  • The front shovel is equipped with a stainless steel bucket, and the bucket has a hydraulic opening and closing function..
  • Front fork, hydraulic front shovel, hydraulic bucket, one machine with multiple functions.
  • The rear digging arm is equipped with a digging assembly to move laterally, and the digging range is larger..
  • Hydraulic support leg, more stable operation.The rotary cab seat is convenient for the driver to operate at both ends and has a higher degree of simulation..
  • The hydraulic system is equipped with a hydraulic reversing valve, switching valve, brushless ESC, oil pump, fine stainless steel oil cylinder, overflow valve and other hydraulic components to form a precise hydraulic system, which is more coordinated and linear..
Check Stock

Caltric Compatible with Rear Differential Axle Shaft Wheel Hub Honda Trx300 Fourtrax 300 2X4 1992-2000

  • Order Includes: 1x Complete Rear Differential, 1x Axle Shaft, 2x Wheel Hubs, 2x Castle Nuts, 2x Pins.
  • Compatible with Honda models: TRX300 Fourtrax 300 2X4 1992-2000.
  • Part Numbers: 41300-HM5-A10, 41300-HC4-000, 41300-HC5-970, 41300-HM5-850.
  • We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced..
Check Stock

ARB 750001 Competition Differential Cover for DANA 50/60 ideal for increasing the rigidity of the whole axe and protect the differential and ring and pinion set from any off-road hazards

  • WHY BUYING ARB 750001 DIFFERENTIAL COVER FOR DANA 50/60: When off-road, it is inevitable that obstacles and off-road hazards will be encountered that could potentially inflict expensive damage to your differential. To prevent this, ARB manufactures the Differential Cover. Using high tensile nodular iron, it has been engineered to protect the differential and ring and pinion set from any off-road hazards..
  • IMPORTANT ARB 750001 FEATURES: Computer-optimized cross brace design increases the structural rigidity of the axle / Top quality neodymium magnets / Prolonged carrier bearing life / Magnet location in the end of the dipstick.
  • BEST ARB DIFFERENTIAL COVER OF ALL: Computer-optimized cross brace design increases the structural rigidity of the whole axle / Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles / Prolonged carrier bearing life due to extra support to the bearing alignment / Top-quality, high-power neodymium magnets are used in both the drain plug and the dipstick to collect metallic wear particles as the vehicle moves.
Check Stock