Top Traxxas Stampede 4xparts Reviews

Traxxas 36054-1 1/10 Stampede 2WD Truck BlueX RTR w/TQ Radio/iD/XL-5 ESC

  • Traxxas 36054-1 - Stampede XL-5 1/10 2WD Monster Truck & iD Battery RTR, Blue.
  • Features: Chassis: Fiber Composite Tub .08" (2mm) Thick, Gray in Color. Drive: Rear Wheel, Motor 550 Size Traxxas Titan 12 Turn, Fan Cooled. Radio: Traxxas TQ Two Channel 2.4GHz with Steering/Throttle Trim/Reverse, Throttle Neutral Adjust and High Torque Waterproof Steering Servo, Water Tight Receiver Box with #2216 4-Channel Receiver. Battery: 7-Cell Hump 3000mAh NiMH with Traxxas High-Current Connector and iD Auto Battery Identification that Allows Traxxas iD Equipped Charg.
  • Includes: (1) Stampede Chassis with Oil-Filled Shocks (1) 550 Motor (1) XL-5 ESC (1) Body (4) Tires (4) Foam Inserts (4) Wheels (1) 19 Tooth Pinion Gear (1) 23 Tooth Pinion Gears (1) 86 Tooth Spur Gear (1) TQ 2.4GHz Radio with Waterproof Electronics (1) 7-Cell Hump NiMH 3000 mAh Battery (1) 4A DC Car Charger Illustrated Instruction Manual.
  • Specs: Length: 16.25" (413mm) Width: 13" (330mm) Height: 9.5" (241mm) Weight: 2.98lbs (1355g) Approx. Wheelbase: 10.75" (273mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.75" (324mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Gear Ratio: 4.5:1 with Stock 19T Pinion Gear 3.7:1 with Optional 23T Pinion Gear.
Check Stock

BANDIT VXL VELINEON 3500 VXL BRUSHLESS MOTOR RUSTLER SLASH #3351R TRAXXAS #24076-3

  • Make sure this fits. by entering your model number..
  • Will fit many 4wd Traxxas 1/10 models: Slash, Stampede, Rally, Rustler, Bandit....
  • NOT compatible with older style traxxas 3355X ESC.
  • Traxxas recommends this motor to be used with matching ESC: 3355r.
Check Stock

Hobbyfire 2.8 Tires and Wheels 12mm Hex RC Tires and Wheels 1/10 Scale RC Monster Truck Tires for Traxxas Rustler VXL 2WD Stampede 4x4 Redcat Volcano EPX Pro Blackout XTE, Etc Set of 4

  • Outer diameter(Height): 5.12" (130mm) | Width: 2.64" (67mm).
  • The Tires and Wheels Not Glued. You need to you glue the edges of the inside of the wheels&tires.
  • Fits for Traxxas Rustler VXL 2WD, Traxxas Rustler 4x4, Traxxas Stampede VXL 2WD, Traxxas Stampede 4x4, Redcat Volcano EPX Pro, Redcat Blackout XTE Pro, and most 12mm Hex Hubs 1/10 Scale Monster Truck Off Road Models..
  • Note the cheap ones. The Wheel Rims Made of high quality Nylon, Durable, NOT EASY BROKEN when working with 2S 3S Brushless. Quality Rubber & Foam, Good Grip & Wear-resistant.
  • Novel appearance and exquisite workmanship. Hobbyfire Quality Guarantee- 100% warrenty.
Check Stock

Traxxas 3757P Rear Shock Springs (Pair), Pink

  • Replacement rear springs for the Traxxas Rustler or 2WD Stampede.
  • Brilliant pink paint lets you customize your ride.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
Check Stock

Traxxas 3639 Front Shock Tower

  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Stampede, Rustler, Slash, Bandit.
  • consult your user's manual for exact parts listings.
Check Stock

Traxxas 3758P Front Shock Springs (Pair), Pink

  • Replacement front springs for the Traxxas 2WD Stampede.
  • Brilliant pink paint lets you customize your ride.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
Check Stock

Traxxas 3638 Rear Shock Tower

  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Stampede.
  • consult your user's manual for exact parts listings.
Check Stock

CODA RACING RC Alloy Caster Block&Steering Blocks for Traxxas 1/10 4X4 Slash Stampede Rustler 4WD -Replaces Part 6837 6832

  • Easy upgrade replace Traxxas stock part #6832 Caster blocks(c-hubs)，#6837 Steering blocks.
  • Fits: Traxxas 1/10 Slash 4X4 ,1/10 Stampede 4X4,1/10 Rustler 4X4,1/10 Slash 4X4 VXL Ultimate Platinum,1/10 Stampede 4X4 VXL,1/10 Rustler 4X4 VXL.ST....
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),5x11x4mm bearings(2),10x15x4mm bearings(2),Bushing Sleeves(4),Screws(6),PTFE washers(2),Suspension Screw....
Check Stock

Globact Aluminum Alloy Front Caster Block&Steering Blocks and Rear Stub Axle Carriers kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736 3752

  • RC 1/10 front caster steering blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752 Stub axle carriers (rear)..
  • Front steering block knuckle kit is only compatible with 1/10 Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor RC vehicle ONLY..
  • Suitable for traxxas rustler 2wd steering blocks use aluminum alloy material, more wear-resistant, not easy to deform..
  • Multi-hole design, adjustable tie rod angle can be used for Traxxas Slash 2WD Caster Block.
  • Globact 2WD caster steering blocks Include(Necessary parts required for installation): 2*Rear Stub Axle Carriers, 2*Steering Block, 2*Caster Blocks (L/R), 6*Screw Pins, 2*Screw, 8*5x11x4mm bearings, 4*Gasket..
Check Stock

Traxxas 3640 Steel Suspension Screw Pin Set (Rustler, Stampede, Bandit)

  • Requires part #2640 for a complete suspension pin set.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Rustler.
  • consult your user's manual for exact parts listings.
Check Stock

for Traxxas Slash Rustler Bandit Vxl 4X4 4WD 2WD Orange Parts Shocks Absorber Front Rear 1 10 Damper Short Course Racing Truck Upgrade 4-Pack

  • ✔ Compatible With traxxas slash 4x4/ traxxas rustler 4x4 vxl/traxxas slash 2wd/traxxas rustler/traxxas bandit/traxxas stampede/Rally 4X4/Hoss 4x4 VXL.
  • ✔ Fitted Really Well.Oil Filled Style,Adjustable Tension,Very Smooth And Durable.Good for Big Jumps..
  • ✔ Alloy Aluminum Front Shock Absorber : Approx.100mm.
  • Alloy Aluminum Rear Shock Absorber : Approx.110mm.
  • ✔ 4 Shocks Per Package. All Hardware For Assembly Included..
  • ✔ Premium Quality Aluminum Shocks Upgrade Parts Ship Fast .Responsive Customer Service..
Check Stock

Upgrade Aluminum Hex Wheel Hubs 12mm w/Axle Pins Nuts Washers Set for 1/10 Traxxas 2WD Slash Stampede Rustler Replace 3654 1654 Blue-Anodized

  • Made of Aluminum, CNC Machined and Lightweight: last performance for driving fiercely.
  • 12mm Wheel Hubs (Thickness 7mm): replace #3654, Upgrades for 1:10 2WD Slash/Stampede/Rustler VXL.
  • 12mm Wheel Hubs (Thickness 5.5mm): replace #1654, Upgrades for 1/10 4x4 Slash/Stampede/Rustler VXL /Rally, Nitro Slash/Stampede/Rustler VXL.
  • Come with Self-lock Nuts,Washers and Pins.
  • Complete Wheel Hubs Set for 1/10 Traxxas 2WD Slash / Stampede / Rustler VXL.
Check Stock

CODA RACING RC Alloy Caster Block&Steering Blocks&Rear Stub Axle Carriers for Traxxas 1/10 4X4 Slash Stampede Rustler 4WD -Replaces Part 6837 6832 1952

  • Easy upgrade replace Traxxas stock part #6832 Caster blocks(c-hubs)，#6837 Steering blocks,#1952 Stub axle carriers.
  • Fits: Traxxas 1/10 Slash 4X4 ,1/10 Stampede 4X4,1/10 Rustler 4X4,1/10 Slash 4X4 VXL Ultimate Platinum,1/10 Stampede 4X4 VXL,1/10 Rustler 4X4 VXL.ST....
  • Precision CNC machined,Anodized 6061-T6 aluminum for lightweight and durable performance..
  • Includes Caster blocks&Steering blocks(L/R),Stub axle carriers(L/R),5x11x4mm bearings(2),10x15x4mm bearings(6),Bushing Sleeves(4),Screws(6),PTFE....
Check Stock