Top Transmission Tool Set Reviews

AutoXscan AC Disconnect Fuel Line Disconnect Tool Set – Fuel Line Tool Fuel Line Removal Tool 7pcs Kit 1/4-7/8 inch

  • Suitable for : Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
  • Measure your application to ensure correct fitment..
  • Package contains (7) fuel line pliers transmission tools:1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
  • AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines..
  • Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
  • Release the fuel line locking mechanism by listening for the slight “click” so easily to use..
  • Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
  • Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released..
Check Stock

Valvoline CVT Full Synthetic Continuously Variable Transmission Fluid 1 QT

  • MAIN USAG：As a connector for car oil pan ATF filling tool,Required to fill or add fluid to the 5R55W Transmission, A must have tool for every mechanic,Save money by not having to get it serviced at the dealer.
  • WIDELY USE：5R55W/5R55S transmission fluid fill adapter Replacement Ford 307-437/SST-6604/OTC 6604/CTA 7420,Compatible with most Ford model ,such as 2003 and newer Ford Explorers.
  • ADVANTAGE：Not easy to rust or oil corroded,Easy to Connects to most Tanks of ATF Filling System,Such as CTA Tools part #7400 ATF Filling Tank,Barb coupler design prevents the hose from slipping；.
  • OPERATING INSTRUCTIONS：Remove fill plug from transmission, install this tool fill transmission to correct fluid level, then remove it and reinstall fill plug in transmission..
  • SATISFACTORY CUSTOMER SERVICE: Yemtuls Guarantee with One Year Limited Warranty & Free Lifetime Technical Support 30 days full refund with returned undamaged Yemtuls transmission fluid fill adapter. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours..
Check Stock

XianFeng 22100 Flywheel Locking Tool for 6.6L Duramax Engine with 36mm 3/4 Inch Wench

  • Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Toothed pieces with screws---Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • Forged 36mm socket---Use on the balancer bolt.Use with a 3/4" square drive wrench.
  • Quality tool ---Made of CRV steel with durability, flywheel locking tool is anti-rust and corrosion-resistant.
Check Stock

ABN Master AC Disconnect Fuel Line Disconnect Tool Set – Fuel Line Tool Fuel Line Removal Tool 6pc Kit 5/16-7/8in

  • ... Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines.
  • FITS YOUR VEHICLE: Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
  • Measure your application to ensure correct fitment.
  • EASY TO USE: Each fuel tool is color-coded by size for easy identification.
  • Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
  • Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job for easily removal.
  • BUILT TO LAST: Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
  • Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released.
  • PACKAGE CONTENTS: Package contains (6) fuel line pliers transmission tools – Red 5/16-inch (8mm), gold 3/8-inch (9.5mm), dark gray 1/2-inch (13mm), blue 5/8-inch (16mm), black 3/4-inch (19mm), silver 7/8-inch (22mm).
Check Stock

TECHTONGDA Automatic Transmission Fluid Flush Machine Oil Changer Cleaning Machine DC12V 0-60PSI

  • 1. This is a universal equipment which is an ideal tool for cleaning and changing the oil of any type of automatic transmission..
  • 2. It can be connected with the pipeline of the gearbox radiator with the quick joint, so that it can complete the cleaning and oil change of the gearbox and the heat pipe road within 20 minutes, and the change rate of the gearbox oil is close to 100%..
  • 3. It is designed with adjustable pressure, and users can set different pressure and flow rate according to different models..
  • 4. Equipped with two flow meters for oil inlet and return, can always keep the same amount of oil in the gearbox..
  • 5. With automatic heating device, not only make the transmission oil being exchaged under constant temperature environment, but also provides a circulating cleaning mode, which can completely remove the metal debris and oil sludge inside the transmission without dismantling the transmission..
Check Stock

Fuel Line Pliers Tweezer Set DEF Exhaust Fluid Lines Disconnect Removal Tools

  • FUNCTIONS: The Oil Cooler Line Quick Disconnect Kit provides 7 different sizes tool to remove/disconnect fittings on fuel lines, heater lines, AC cooling lines and other quick disconnect couplings..
  • FIT FOR VEHICLES: The AC Fuel line disconnect tools are compatible with most Ford, GM, Chrysler and Mazda models. It also fits for some other vehicles while the automatic transmission line is within the sizes..
  • EASY TO USE: The compact size is easy to grasp and the angled design allows to access the hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
  • WHAT YOU GET: The Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
  • DURABILITY: All fuel line quick disconnect heater hose disconnect tools are made of hard plastic to secure the strength and sturdiness..
Check Stock

Shorty's Skate Tool The Wench

  • Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
  • Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
  • Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
  • 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check Stock

Performance Tool W89330 Fuel And Transmission Line Disconnect Set, 7-Piece

  • Color coded anodized aluminum fuel line disconnect tools.
  • Transmission cooler line disconnect tool.
  • Ford and Mercury transmission cooler line disconnect tool.
  • Ford, Chrysler and GM quick disconnect tool.
  • Ford, Chrysler and GM quick disconnect tool..
Check Stock

OEMTOOLS 24441 Manual ATF Refill System, 8 Adapter Transmission Fluid Pump, Manual Fluid Transfer Pump Automotive, ATF Pump w/Shut-Off Valve

  • MANUAL TRANSMISSION FILL PUMP: The manual transmission fluid transfer pump allows the operator to fill or top off transmissions with up to 3 liters (3.1 quarts) of fluid between refills.
  • Multiple adapters to fit all of your transmission’s needs.
  • PRESSURIZED FILLER SYSTEM: Pressurized operation frees users from continual pumping.
  • Transmission flushing system works at a maximum pressure of 20 PSI.
  • The gauge registers a maximum pressure of 30 PSI.
  • Release excess pressure with the release valve.
  • FITS MANY VEHICLES: This transmission fluid pump automotive tool includes adapters for use with many Ford, BMW, Honda, Nissan, VW, Porsche, Mini Cooper, Audi, and Mercedes-Benz transmissions.
  • Included adapters cover the most common transmission systems.
  • CONVENIENT FEATURES: ATF transmission fluid filler comes with a belt attachment for storing each ATF flush adapter on the oil dispenser tank.
  • Transmission fluid flush kit hose features a swivel connector and a fluid dispensing shut-off valve.
  • MULTI-PURPOSE TRANSMISSION FILL KIT: This transmission pump can be used for pressurized fills like engine coolant, motor oil, brake or power steering fluid.
  • Transmission fluid pump transfer system is a money saver for the DIY mechanic’s tool kit.
Check Stock

Bolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine

  • Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
  • Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
  • Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check Stock

YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank

  • YSTOOL fluid extractor and dispenser tool kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine.
  • This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
  • YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inle....
Check Stock

Grizzly Industrial T28011 - Bowl-Turning Tool Rest

  • High-Precision Three-Jaw Chuck: Ideal for professionals, this mini metal lathe is equipped with a high-precision chuck with 3 jaws able to handle both....
  • Digital Display: This miniature lathe includes a digital screen clearly showing the rotational speed, ensuring precise and smooth operation..
  • Metal Gear Set: Especially suitable for threading, this wear-resistant and durable set of metal gears provides strong and efficient power transmission....
  • 4-Way Tool Post: The lathe's adjustable 4-way tool post allows you to easily change your cutting tools and angles, permitting easy bevelling..
  • Large Swing Range: This lathe has a swing over bed of 8.7″ (220 mm) and a swing over cross slide of 29.5″ (750 mm), so you can handle larger....
Check Stock

Amerbm Professional Brake Line Flaring Tool 45 Degree Set Single Double and Bubble Flares Tool Kit for Steel Copper Tube

  • 45-degree tool set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16", 1/4", 5/16", 3/8" diameter lines..
  • This flaring tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily..
  • The "turret-style" design allows you to make those precision flares in a minimal time, which saves you the hassle of groping for small parts or losing them..
  • When building car brake lines, the brake flaring tool kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises..
  • The flaring tool set is made of durable steel for reliable and long-lasting performance, high precision and safe to use. With a plastic case, compact and convenient to carry and store..
Check Stock