Top Transformer For Amplifier Reviews

Nobsound 6P1 6.8W x 2 Vacuum Tube Power Amplifier; Stereo Class A Single-Ended Audio Amp Handcrafted

  • This Class A single-ended vacuum tube amplifier adopts hand welding to ensure the true reality of the sound quality (with headphone amp function ASIN: B076CC92BX)..
  • This amplifier adopts transformer parallel output to reduce its internal resistance by half and achieve doubled improvement on its power..
  • Using antimagnetic transformer covers to shield current interference and achieve much lower static noise..
  • Its sound output is full of analog style. The bass part is deep and powerful and the vocal part is sweet and intoxicating..
  • It has a classic and graceful appearance. The VU meters and vacuum tubes makes it more elegant and attractive..
Check Stock

PAC AOEM-FRD24 Add-On Amplifier Interface with 24-Pin Connector for your 2003 - 2014 Ford, Lincoln, or Mercury factory radio

  • Interface that Allows the Replacement or Addition of an Amplifier in Select Ford Vehicles without Factory Amplified THX Sound System.
  • Provides 2:1 gain and infinite attenuation.
  • Linear from 20-20,000 Hz.Not compatible in vehicles equipped with the THX or Sony amplified systems.
  • Input connectors plug into factory stereo and vehicle harness.
  • Interface that allows the replacement or addition of an amplifier in select ford vehicles without factory amplified thx sound system.
Check Stock

TOPINCN 6J1 Vacuum Electron Tube Valve Preamp Amplifier Board Headphone Amp Parts Preamplifier Musical Fidelity Kit AC12V 0.8A

  • Connect the 6J1 tube pre-amp between sound source and amplifier, it will effectively filter digital flavor, the music and human voice will be relatively good.
  • Eight 470UF capacitor filter is very clean, excellent power system to no hum, filaments are powered with DC 12V and need to be connected in series in order to reduce noise.
  • Coupling capacitor is electrodeless electrolytic capacitor with high frequency and low resistance.
  • Using DC 5.5*2.1 socket and AC 12V transformer, you can also use AC 12V transformer without plug, just need to weld the power cord onto the circuit board.
  • This kit comes in parts so you can assemble them together by yourself, enjoy the process of building your own tube amplifier.
Check Stock

MTX Audio TNP212D2 Terminator Power Pack Subwoofer System - Set of 2,Black & PAC SNI-35 Variable LOC Line Out Converter

  • Product 1: Complete amplified bass package bundles 2 x 12 subwoofer enclosure and mono block amplifier.
  • Product 1: TNA251 amplifier delivers 250 watts x 1 at 2 ohms.
  • Product 1: Variable low- and high-pass filters offer 40Hz–400Hz range for sound shaping.
  • Product 1: TNE212D2 enclosure features dual 12-inch Terminator subwoofers with 1200 watts max power.
  • Product 2: Adjustable Line Output Converter.
  • Product 2: Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input.
  • Product 2: Utilize Audio Transformer for Noise Isolation.
Check Stock

Electronic Amplifier, 6J1 Tube Valve Amplifier Tube Amplifier 6J1 Vacuum Electron Tube Valve Preamp Amplifier Board Amplifier Electronic Diy Kit 6J1 Tube Preamp

  • 【Definition】 A valve amplifier or tube amplifier is a type of electronic amplifier that uses vacuum tubes to increase the amplitude or power of a signal..
  • 【Function】 Connect this preamplifier to the audio source with 6J1 tubes and effectively filter the digital flavor. Tube amplifiers produce a warmer or more natural valve sound, make music and the human voice is relatively good..
  • 【Capacitor Filter / Coupling Capacitor】 Eight 470UF capacitor filters are very clean, excellent power supply does not cause humming, filaments are supplied with 12 V DC and must be connected in series to reduce noise. The coupling capacitor is a high frequency electrodeless electrolytic capacitor and low resistance..
  • 【Features】 With the DC 5.5 * 2.1 socket and 12V AC transformer, you can also use a 12V AC transformer without a plug. All you have to do is weld the power cord to the circuit board.This kit is available in parts so you can assemble it yourself and build your own tube amp..
  • 【Customer Service】 Thincol has always strived to provide customers with high quality products and outstanding customer service. If you encounter problems during the purchase or during use, would you contact us? then we will do our best to serve you and protect your interests..
Check Stock

SoundArtist SA-200IA Stereo Amplifier HiFi Integrated Amplifier 200W+200W with Remote Control Black

  • With a remote control,Front panel with knobs to adjust treble and bass..
  • 200W High Power,High-power high-quality professional pure copper transformer, high-quality filter capacitor.
  • the latter stage uses double differential....
  • This amplifier is very good at Base, and there is a Tone Control to set the Bass and Treble..
  • One group of RCA output, it can be a preamp to connect another power amplifier to play dual amplifier, or connect an Active Subwoofer to get a 2.1....
Check Stock

3.5mm Male AUX Audio to USB 2.0 Female Cable Cord for Car MP3

  • Two channel adjustable speaker cable to RCA line output converter.
  • Use the SLOC2 when adding an amplifier to a factory radio to convert the radio’s speaker level output to the low amplifier(RCA) level input.
  • Utilize audio transformer for noise isolation.
  • Split pin RCA connector with pure Oxygen Free Copper wire.
Check Stock

Golden Age Project R1 Active MKIII Active Ribbon Microphone

  • Unmatched natural & musical sound of a classical ribbon microphone combined with the constent sound quality offered by addition of active electronics.
  • The typical large and mellow ribbon sound quality with a very smooth top end and an extended low end.
  • A Bipolar/FET descrete low-noise amplifier with a low impedance transformer less output stage, powered by standard 48V phantom power.
  • It raises the level and isolates the ribbon and gain make-up transformer from the outside world.
  • Removable microphone cable and padded case included.
  • Switchable -10db pad and 100hz low cut filter.
Check Stock

Nobsound 6P1 6.8W x 2 Vacuum Tube Power Amplifier; Stereo Class A Single-Ended Audio Amp Headphone Amplifier Handcrafted (with Headphone Amp Function)

  • This Class A single-ended vacuum tube amplifier adopts hand welding to ensure the true reality of the sound quality. This version has headphone output, which suits for 32Ω-600Ω impedance all kinds of headphones. The toggle on the front panel is to switch between speaker and headphones. Please connect your speakers (both 4Ω and 8Ω) to 8Ω and 0Ω posts..
  • This amplifier adopts transformer parallel output to reduce its internal resistance by half and achieve doubled improvement on its power..
  • Using antimagnetic transformer covers to shield current interference and achieve much lower static noise..
  • Its sound output is full of analog style. The bass part is deep and powerful and the vocal part is sweet and intoxicating.Its sound output is full of analog style. The bass part is deep and powerful and the vocal part is sweet and intoxicating..
  • It has a classic and graceful appearance. The VU meters and vacuum tubes makes it more elegant and attractive..
Check Stock

Kuuleyn Vacuum Electron Tube Valve Preamp Amplifier Board Headphone Amp Parts Musical Fidelity Kit, 6J1 Audio Tube Headphone Amplifier, Compact Electronic DIY Kit DIY Parts (Static Bag)

  • 【Funtion】Connect the 6J1 tube pre-amp between sound source and amplifier, it will effectively filter digital flavor, the music and human voice will be relatively good.
  • 【Eight 470uf Capacitor Filter】Eight 470UF capacitor filter is very clean, excellent power system to no hum, filaments are powered with DC 12V and need to be connected in series in order to reduce noise.
  • 【High Frequency And Low Proof】A coupling capacitor is an electrodeless electrolytic capacitor with high frequency and low proof.
  • 【Easy To Use】Using DC 5.5*2.1 socket and AC 12V transformer, you can also use AC 12V transformer without a plug, just need to weld the power cord onto the circuit board.
  • 【Can Yourself Assemble Them】This kit comes in parts so you can assemble them together by yourself, enjoy the process of building your own tube amplifier.
Check Stock

Pyle Car Stereo Wiring Kit - Audio Amplifier & Subwoofer Speaker Installation Cables (4 Gauge), Blue (PLAM40) & PAC SNI-35 Variable LOC Line Out Converter

  • Product 1: CAR AUDIO WIRING: Universal car stereo audio system cable and wire kit. Includes all necessary pieces to set up your amplifier and subwoofer speakers.
  • Product 1: INCLUDED AUDIO CABLES: 20’ ft. 4 gauge red power wire, 4’ ft. 4 gauge black ground wire, 20’ ft. 16 gauge blue remote turn-on, 20’ ft. 12 gauge stereo speaker wire.
  • Product 1: MORE AUDIO CONNECTION: 20’ ft. stereo RCA audio cable, 6’ ft. black split loom cable conduit - enables connection for amplifier and subwoofer speakers.
  • Product 1: CAR STEREO SOUND: Also includes (2) ring terminals 8G, (2) spade terminals: 8G, (5) spade terminals: 14-16G, (3) butt connector, (20) cable ties, (1) black grommet.
  • Product 2: Adjustable Line Output Converter.
  • Product 2: Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input.
  • Product 2: Utilize Audio Transformer for Noise Isolation.
Check Stock

Taidacent OPA541 OP AMP High Power Monolithic Operational Amplifier 5A Current High Voltage Audio Amplifier Sound Amplifier Board

  • Name: OPA541 High Voltage High Current Power Amplifier.
  • Size: 96mm*64mm*41mm (length, width, height).
  • The OPA541 module is a power operational amplifier capable of operating with a power supply up to 40V and providing continuous output current up to....
  • Suitable for motor-driven speaker drive, transformer drive and audio amplifier. It can also amplify triangle wave, sine wave and square wave signals..
  • The power consumption of the module is large, and the power supply requires a certain margin. It is recommended to use a power supply with a current....
  • The output signal is recommended to use the SMA to BNC cable to directly observe the effect of the oscilloscope. Poor contact or poor quality wires....
Check Stock

AOSHIKE TPA3116 DC 12-24v 100W Subwoofer Amplifier Board Support Bass Output Digital Small Power Amplifier Board Video Audio Accessories

  • Frequency response range: input: 20 hz - 20 KHZ, output: 20 hz - 180 hz.
  • Operating voltage range: DC 12-24V(maximum voltage is no more than 24V).
  • This is a pre-amplifier, bass frequency....
  • DC 12-24V power supply, wide operating voltage, power-saving design, more than 90% power efficiency. Maximum support 100W (Bass) bass channel output.
  • Speaker impedance: bass speaker impedance: 2-8 ohm.
  • You can use a good switching power supply adapter, laptop switching power supply, or rectified filter transformer power supply, you can also use....
Check Stock