Top Transceiver Power Supply Reviews

SUPERNIGHT 12V 30A 360W Power Supply Universal Regulated Switching Transformer Adapter AC 110V/220V to DC 12V Power LED Driver for 3D Printer CCTV Radio Computer Project LED Strip Lights

  • Universal AC input / full range, AC Input: 110V/220V.
  • Smart device surge protection: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection. Auto-recovery....
  • Great switching power supply for home appliances, the power supply is non-waterproof, please use indoor..
  • This 12V 30A power supply has a built-in cooling fan, when the power supply is used, the fan will start to dissipate heat..
  • Power supply great for 3D Printer , ham Radio Transceiver , Car Subwoofer amp Audio Amplifier , RC LiPo Chargers and LED Strips..
Check Stock

S-Pixie CW QRP Ham Amateur Shortwave Radio Transceiver 7.023 7.050 Mhz DIY Kits with Transparent Acrylic Shell

  • "PIXIE" is mini the 40 meter band simple micro-power amplitude telegraph transceiver, 9 ~ 13.8V DC power supply.
  • Resistance to change is a horizontal packaging vertical packaging, easy to solve the short-circuit resistance has long been a problem..
  • Power input does not distinguish between positive and negative, and to improve the power supply range, the user can easily use 13.8V communication power supply, and do not worry about the positive and negative reversed losses..
  • Increasing the transmitter side as the buzzer sound prompts (using a jumper cap shielding sound), an increase of LED lights as transmitters prompt..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thx.
Check Stock

Hamshack Raspberry Pi: Learn How To Use Raspberry Pi For Amateur Radio Activities And 3 DIY Projects

  • The transceiver worked fine on transmit and receive. The plexiglass case still had the brown paper protective layer on it..
  • The use of horizontal resistors and horizontal diodes (upside down welding) makes the welding process not easy to short-circuit..
  • It uses a high-end potentiometer, no manual tools are needed to adjust the beat frequency, and it can be adjusted manually..
  • The power supply does not distinguish between positive and negative poles (Recommended battery or linear power supply), the power supply range is increased to 9~13.8V，>500mA..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thx.
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

S-Pixie HAM Transceiver Radio Shortwave Telegraph 40m Super CW QRP 7.023 MHz DIY Kits with Shell Large Potentiometer

  • The transceiver worked fine on transmit and receive. The plexiglass case still had the brown paper protective layer on it..
  • The use of horizontal resistors and horizontal diodes (upside down welding) makes the welding process not easy to short-circuit..
  • It uses a high-end potentiometer, no manual tools are needed to adjust the beat frequency, and it can be adjusted manually..
  • The power supply does not distinguish between positive and negative poles (Recommended battery or linear power supply), the power supply range is increased to 9~13.8V，>500mA..
  • You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thx.
Check Stock

Liyafy 1Hz-50MHz Crystal Oscillator Tester Frequency Counter Tester Measuring Meter Case Durable DIY Led Kit

  • High abrasion resistance, sturdy and durable, Transparent casing effectively protect the Frequency Counters body..
  • Programmable addition and subtraction frequency setting for the measurement of radio transceiver and other equipment..
  • Automatic range conversion, without human switch.
  • Can measure most commonly used crystal of oscillation frequency..
  • The power saving mode can be selected. If the frequency is not changed automatically in 15 seconds, the display will be closed automatically..
  • The power supply range is wide, which can be powered by USB interface of general motors, or 5-12v or 9V battery for external power supply..
Check Stock

Waveshare USB to RS232 / RS485 / TTL Industrial Isolated Converter with Original FT232RL Embedded Protection Circuits and Aluminium Alloy Enclosure for Industrial Control Equipments

  • This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power....
  • The USB TO RS232/485/TTL is very easy to use fully automatic transceiving without delay. Due to its fast communication stability reliability and....
  • Fully automatic transceiver circuit with no delay ensures the USB port communicates with different interfaces fastly and stably without interfering....
  • Onboard unibody power supply isolation provides stable isolated voltage needs no extra power supply for the isolated terminal.
  • High quality USB-B and RS232 connectors smoothly plug/pull.
Check Stock

AnyTone AT-5888UV 50W Dual Band Ham Mobile Radio VHF 144-148MHZ / UHF 420-450MHz Car Transceiver

  • 1.The transceiver is a ruggedly-built,high quality Dual-band transceiver providing 50Watts of power output. Quad band transceiver for the widely....
  • 2.Dual-band mobile radio has four independent receiving bands, consist of UU,UV,VU,VV for dual receive and dual output, plus receiving for signal of....
  • 3. Cross Band Repeater: 758 memory channels, full duple operation with independent volume and squelch controls, compander and built-in CTCSS/DCS,....
  • 4.CHIRP SUPPORT. Free software also can download at Anytone office website..
  • 5.Package contents: 1 x Anytone 5888UV Transceiver, 1 x Microphone, 1 x Mobile Mounting Bracket, 1 x DC Power Cable with Fuse Holder, 1 x Screws for....
Check Stock

20 Fiber Optic Visual Fault Locator Replacement Parts - 10x Ceramic Tube Sleeves with 10 Fitting Connectors

  • Supported throughput up to 10.5 Gbps with Multi Mode fiber for distances up to 550 m (1804 feet).
  • Digital Diagnostics Monitoring (DDM) support.
  • Operating temperature: 0 to 70 °C (32 to 158 °F).
Check Stock

USB Programming Cable for LEIXEN LX VV-808S/ VV-898 Car Mobile Radio

  • Portable Two Way Radio Mobile Transceiver. The newest transceiver differs from traditional one, built-in 12000mAh Battery, so it can work continuously....
  • A DC 13.8V hole and a power charging hole on the side of the radio. Plug the power cord into the charging port when charging. If you want to use the....
  • The mobile transceiver built-in a mini fan and a temperature sensing system, so when the machine is continuously used in high power transmission, and....
  • Dual PTT function: Dual Push-To-Talk (PTT) speaker mic. Communicate easily with the two easily accessible buttons. There is a speaker switch on the....
  • Measure: 6*8.1*1.8 inches. Package including (main): 1*mobile radio, 1*Instruction, 1*mobile antenna, 1*dual PPT mic, 1*so239 to pl259 adapter,....
Check Stock

USA Flag Amateur Ham Radio Day Celebration Shirt Gift

  • Are you a full pledged member of a radio club in US? Take your mobile walkie-talkies, two-way radios, antenna, license manual study guide book, handheld, power supply, speaker and other accessories. Uniquely designed shirt for technician men, women & kids..
  • This can be a birthday or Christmas present to the head, officials and members of the radio community. Funny toddler shirt for handheld portable radio addicts. Great in addition with coax cable, tuner, car 2 6 10 meter antenna mount, transceiver, ….
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

TWAYRDIO Dual Band VHF UHF Back Pack Mobile Transceiver Built-in 12000mAh Battery Dual PTT MIC Portable Ham Amateur Radio with Software, Programming Cable, Mobile Antenna and SO239 to PL259 Adapter

  • Portable Two Way Radio Mobile Transceiver. The newest transceiver differs from traditional one, built-in 12000mAh Battery, so it can work continuously for 4 hours. Fully charge the radio at home, then put it into backpack, take it out and have a adventure. Under normal circumstances, the communication distance is about 10-15miles (according the specific environment). Total 198 channel and 6 VFO channel..
  • A DC 13.8V hole and a power charging hole on the side of the radio. Plug the power cord into the charging port when charging. If you want to use the radio directly (current does not flow through the battery), plug the charging cable into the DC 13.8V hole. Multifunctional button: Put “I” down, the radio get power from the DC power adapter directly---need to connect the charging cable. Put “II” down, the radio get power from the battery inside..
  • The mobile transceiver built-in a mini fan and a temperature sensing system, so when the machine is continuously used in high power transmission, and the temperature inside the machine reaches the 45℃, the mini fan will open automatically to reduce the temperature..
  • Dual PTT function: Dual Push-To-Talk (PTT) speaker mic. Communicate easily with the two easily accessible buttons. There is a speaker switc....
Check Stock

ANHAN Passive Video Balun with Power BNC to RJ45 Adapter Cat5 / Cat6 Cable to BNC Male Network Transceiver For CCTV Security Surveillance Camera 1 Pair

  • Power ,audio and Video signals are routed via Cat5e/Cat6 Cable with RJ45 connectors instead of coaxial cable,Low-cost cable, reduce the video noise.
  • Type: Video Balun transceiver. Video input/output Male BNC / RJ45 Port / DC Jack. Male BNC with extended mini-coax pigtail.
  • BNC Male to RJ45 Long Transmission Distance Network Transceiver:Power signal up to 600 ft (200m) in pairs,12V/24V, DC/AC .Color video up to 1000 ft (300m) in pairs via UTP Cat5e/6.please increase power voltage when distance is more than 150m.
  • Passive Video Power Balun Works with most video devices, Compact size for easy installation.
  • Package Inclueds :1 Pair BNC to RJ45 Video Balun Transceiver Adapter,1 x Power Cable.
Check Stock