Top Trailer Hitch Ball Bumper Guard Reviews

CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs

  • DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools.
Check Stock

Shocker HD Air Hitch with Dual Ball Mount - 2 & 2 5/16 inch Balls - 20,000 lbs - Fits Chevy Silverado / GMC Sierra 2500 3500 (2015-2023), Fits 2-1/2\ Hitch

  • Built in heavy-duty airbag gives you smoother safer trailer towing. Improves your ride, reduces wear & tear on pickup & trailer. Instant air ride towing for your pickup & trailer. Built in airbag cushions ride & absorbs road shock.
  • Air ride technology filters road shock through built in air spring bag and cushions the ride. Fine tune for your towing weight. Just add air for heavier loads. The air bag sits under receiver tube. Adjust the air pressure for the best ride and load control..
  • 20,000 lbs towing capacity & 2,000 lbs tongue weight. 8 Adjustment Holes for 1/2 to 4-1/2 inches of drop. Includes Combo Hitch Balls - 2" and 2 5/16" - Just flip around when pulling trailers with different couplers. Combo ball rated 16,000 gtw & 1,600 tw for 2-5/16 ball and 8,000 gtw for 2" ball.Choose 2" or 2-1/2" receiver hitch shank.
  • Includes Shocker HD air bumper hitch base frame, adjustable combo ball (2" & 2-5/16" ball) along with 2 D-handle ball mount pins. Made in the USA by Shocker Hitch, Arthur, ND. 10+ Ball Options (Sold Separately).
  • Safety Notice: The Shocker Hitch is a heavy duty unit that in most cases exceeds factory towing weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight recommendations of the truck ....
Check Stock

TLAPS 7422440213216 For 1988-2000 Chevy/GMC C10 C/K Pickup 1500 2500 3500 Class 4 IV Black 2\ Trailer Hitch Receiver With 2 Inch Drop Loaded Ball Mount

  • Application: For 1988-1999 Chevy C10 C/K Pickup 1500 Models, 1988-2000 Chevy C10 C/K Pickup 2500 / 3500 Models, 1988-1999 GMC C10 C/K Pickup 1500 Models, 1988-2000 GMC C10 C/K Pickup 2500 / 3500 Models ( Attention Note: Will Not Fit 1500 Models With Dual Exhaust / 10 Inch Step Bumper, Will Not Fit 2500 / 3500 Models With Dual Exhaust / 10 Inch Step Bumper / Crew Cab / Cab & Chassis ).
  • Trailer Hitch + Loaded Ball Mount ( Trailer Ball, Pin & Clip Are Included ).
  • Hitch Class: Class 4, Receiver Size: 2" Receiver Tube, Heavy Duty Purposes With Larger Weight & Carry Capacity + Stronger Materials Than Class 3, Towing Specifications: Weight Carrying Capacity - 10000 lbs, Tongue Weight - 1000 lbs, Weight Distribution - 12000 lbs, Weight Distribution Tongue Weight - 1200 lbs.
  • Loaded Ball Mount: Receiver Size: 2" Receiver Tube, Towing Specifications: Gross Trailer Weight - 3500 lbs, Tongue Weight - 350 lbs, Trailer Ball Diameter - 1.875, 2" Drop For Trailer Leveling, Length" 8 1/4.
Check Stock

Bolt-on RV Bumper Hitch Receiver Adapter Fits 3-4" Beam, 2" Receiver, Trailer Accessories Best for Mounting Bike Racks & Cargo Carriers

  • Upgrade the Patented design : Depending on the different width of the steel beam and the gap of the adapter, these two bolts have the adjustment function, can lock the steel beam, without shaking！ Patented products, please do not imitate !!.
  • VERSATILE DESIGN: The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 2-3-4-4.5" bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more. Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs..
  • 200LBS TONGUE WEIGHT CAPACITY: The Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes)..
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 2"-4.5" RV bumper with the included hardware and typically just a few tools..
  • PACKAGE: Camper RV bumper hitch, 4 bolts included for Mounting hardware..
Check Stock

Shocker HD 20K Air Receiver Hitch with Dual Ball Mount - 2 & 2 5/16 inch Balls - 20,000 lbs - Fits Ford SuperDuty F250 F350 F450 F550 2017-2023 Fits 2-1/2 Hitch

  • Built in heavy-duty airbag gives you smoother safer trailer towing. Improves your ride, reduces wear & tear on pickup & trailer. Instant air ride towing for your pickup & trailer. Built in airbag cushions ride & absorbs road shock.
  • Air ride technology filters road shock through built in air spring bag and cushions the ride. Fine tune for your towing weight. Just add air for heavier loads. The air bag sits under receiver tube. Adjust the air pressure for the best ride and load control..
  • 20,000 lbs towing capacity & 2,000 lbs tongue weight. 8 Adjustment Holes for 1/2 to 4-1/2 inches of drop. Includes Combo Hitch Balls - 2" and 2 5/16" - Just flip around when pulling trailers with different couplers. Combo ball rated 20,000 gtw & 2,000 tw for 2-5/16 ball and 10,000 gtw for 2" ball. Choose 2" or 2-1/2" receiver hitch shank.
  • Includes Shocker HD air bumper hitch base frame, adjustable combo ball (2" & 2-5/16" ball) along with 2 D-handle ball mount pins. Made in the USA by Shocker Hitch, Arthur, ND. 10+ Ball Options (Sold Separately).
  • Safety Notice: The Shocker Hitch is a heavy duty unit that in most cases exceeds factory towing weight capacities, therefore it is imperative that you always read and follow the tongue and towing weight....
Check Stock

XPE Aluminum Adjustable Trailer Hitch Fits 2-inch Receiver, 6-inch Drop, Solid Tube Hitch -12,500 LBS, 2 and 2-5/16 inch Balls

  • Wide Range of Applicability:Our standard 2*2" receiver can perfectly fit any connector of traile，tugboats, trailers, campers, livestock trailers, recreational vehicle trailers, off-road car, ATV, motorcycle, rear bumper, agricultural machines and dual receiver extender with the same size..
  • Powerful Strength:Ajustable trailer hitch is made of aircraft grade aluminum, the polished smooth and firm body will not corrode, chip, or peel. built to last and withstand bumps, bruises, which from rain, water, dust, sand, ect..
  • Strong Pulling Force: After professional laboratory evaluation,2" hitch ball has towing capacity of 8,000lbs, while 2-5/16" hitch ball offers an industry-leading towing capacity of 12,500lbs, so the hitch can be easily adjustable for optimal towing..
  • High Quality:Towing Ball Mounts Exquisitely crafted from Aluminum alloy and with advanced oxide technology applied on the finish,Each adjustable trailer hitch includes a combination of two sets of locks and keys to secure the ball mount platform and the hitch Anti-theft features..
Check Stock

CROSSHIP Adjustable Trailer Hitch Ball Mount - Fits 2'' Receiver, 6Inch Drop/Rise Drop Hitch with 2'' & 2-5/16'' Solid Dual Balls 25,000 lbs Capacity- Tow Hitch for Heavy Duty Truck with Double Pins

  • ... ⛴【Adjustable Ball Mount】This ball hitch allows for precise and rapid 6" drop and 6" rise, allowing you to customize the drop or rise to your preferred level in a matter of minutes. You can adjust the height in both the drop and rise position to accommodate trailers of different heights, ensuring a level and stable towing configuration..
  • 【Universal Compatibility】This trailer hitch is compatible with all 2" receivers, making it a versatile choice for a variety of towing needs. Whether you're trailer, rear bumper, camping, boating, hauling ATVs, motorcycles, or agricultural machines, this hitch can handle it all..
  • 【Durable and Reliable】Produced with zinc powder coat finish along with corrosion-resistant zinc plating, this hitch is built to last. It can handle heavier loads and is less likely to warp or bend under stress. The thickness of the steel plate reaches 3/8", making it more durable and able to bear greater weight than ordinary tow hitch. Since the tow vehicle and trailer track independently, customers gain greater control and safety through the slight wobble cushioning and trailer bou....
Check Stock

Nachman 12-101 Bumper Hitch Universal

  • Smoother Safer Towing - Air ride towing technology with a heavy duty built in air spring to cushion the ride & absorb the road shock. Built in HD Airbag: Absorbs road shock, creates smooth ride & reduces tendency to trailer sway. Dual rubber bump cushions also offer additional HD performance. Safety Red Powder Coat Finish: Impact Resistant Premium Powder-Coat Finish on Base Frame..
  • 8 Adjustment holes - Adjustable height for combo-ball mount (1/2 inch to 4-1/2 inches of drop). Fine tune for your towing weight. Just add air for heavier loads. Great for Pickups: Fits Great for Full Size Pickup Trucks & Vans, Midsize Pickups & Select SUVS (with receiver under bumper)..
  • 20,000 lbs Heavy Duty Capacity: 20,000 lbs towing capacity and a 2,000 lbs tongue weight. (can vary by mount) Combo Ball Mount Tow Rating: 2-5/16" ball rated at 16,000 lbs & 2" ball rated at 8,000 lbs. Adjustable for Weight: Fine tune for your towing weight. Just add air for heavier loads..
  • Kit includes complete Shocker HD air receiver hitch base frame assembly with built in 20K air bag & dual bump cushions, ball mount you choose and two d-handle ball mount hitch pins. 10+ Ball Options (Sold Separately): Drop, Raised, Sway Bar Tab Options, Pintle, Clevis, Drawbar & More..
Check Stock

RV Bumper Hitch Receiver 2 inch Adapter Receiver Fits for 4 x 4 inches Square Bumper Beam Level Trailer Towing Purpose

  • Upgrade the design: Universal, applicable to different width and height of the steel beam, the most important thing is that according to the diferent steel beam, has the adjustment function, can tightly lock the steel beam does not shake ! Patented products, please do not imitate !!.
  • VERSATILE DESIGN:The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools..
  • PACKAGE: Camper RV bumper hitch, Instructions, 4 bolts included for Mounting hardware..
Check Stock

XPE Adjustable Trailer Hitch Fits 2.5'' Receiver, 8'' Drop/Rise Drop, Chrome Plated Steel Tow Balls (2''X2-5/16''), Heavy Duty Ball Mount - 18,500 Gtw with Trailer Locks, Silver X-312508

  • High Quality:Towing Ball Mounts Exquisitely crafted from Aluminum alloy and with advanced oxide technology applied on the finish,Each adjustable trailer hitch includes a combination of two sets of locks and keys to secure the ball mount platform and the hitch Anti-theft features..
  • Powerful Strength:Ajustable trailer hitch is made of aircraft grade aluminum, the polished smooth and firm body will not corrode, chip, or peel. built to last and withstand bumps, bruises, which from rain, water, dust, sand, ect..
  • Strong Pulling Force: After professional laboratory evaluation,2" hitch ball has towing capacity of 8,000lbs, while 2-5/16" hitch ball offers an industry-leading towing capacity of 18,500lbs, so the hitch can be easily adjustable for optimal towing..
  • Wide Range of Applicability:Our standard 2.5*2.5" receiver can perfectly fit any connector of traile，tugboats, trailers, campers, livestock trailers, recreational vehicle trailers, off-road car, ATV, motorcycle, rear bumper, agricultural machines and dual receiver extender with the same size..
Check Stock

Shocker HD 20K Air Drop Bumper Hitch 4-1/2 -8-1/2 Drop Fits 2-1/2 Hitch Has 2-5/16 Ball

  • Smoother Safer Towing - Air ride towing technology with a heavy duty built in air spring to cushion the ride & absorb the road shock. Built in HD Airbag: Absorbs road shock, creates smooth ride & reduces tendency to trailer sway. Dual rubber bump cushions also offer additional HD performance..
  • Adjustable Drop Hitch Ball Mount: 8 Adjustment holes for 4-1/2" to 8-1/2" of Drop. Choose 2" Ball or 2-5/16" Ball Safety Red Powder Coat Finish: Impact Resistant Premium Powder-Coat Finish on Base Frame. Great for Pickups: Fits Great for Full Size Pickup Trucks & Vans, Midsize Pickups & Select SUVS (with receiver under bumper)..
  • 20,000 lbs Heavy Duty Capacity: 20,000 lbs towing capacity and a 2,000 lbs tongue weight. (can vary by mount) Adjustable for Weight: Fine tune for your towing weight. Just add air for heavier loads..
  • Kit includes complete Shocker HD air receiver hitch base frame assembly with built in 20K air bag & dual bump cushions, adjustable drop ball mount and two d-handle ball mount hitch pins. 10+ Ball Options (Sold Separately): Drop, Raised, Sway Bar Tab Options, Clevis, Drawbar, Pintle & More..
  • The Shocker Hitch is a heavy duty unit that in most cases exceeds factory towing weight capacities, therefore it is imperative that....
Check Stock

OPENROAD Adjustable Trailer Hitch Ball Mount Fits 2-Inch Receiver, 2" Tow Balls 7500lbs, 9-1/2" Drop/ 8-1/4" Rise Drop Hitch, Tow Hitch for Heavy Duty Truck with Stainless Steel Pins and Lock

  • HIGH STRENGTH: Adjustable trailer hitch ball mount is rated for 7500 lbs gross trailer weight this hitch adapter is constructed from quality steel to offer dependable strength..
  • ADJUSTABLE HITCH: The 9-1/2" drop/ 8-1/4" rise drop hitch offer flexible adjustment. The pins hold hitch balls in place and allow for a quick change-out system..
  • VERSATILE USAGE & ANTI-THEFT FEATURES: Our adjustable trailer hitch ball mount can perfectly fit any connector of trailer, rear bumper, agricultural machines and dual receiver extender with the same size, aluminum shank can be adjusted according to your needs.Each hitch ball mount includes a combination of a set of lock and two keys, no additional lock is required to prevent the platform and balls from being removed..
  • CORROSION-RESISTANT: High-quality aluminum construction&black powder finished surface, the hitch extender is durable and resistant to rust, corrosion, and UV damage, adding a long service protecting for your vehicle from scuffs, scratches and even dents..
  • 12-MONTH WARRANTY: Your satisfaction is very important to....
Check Stock

KAJIMOTOR 2\ Drop Hitch Receiver Trailer Ball Mount Pin for 2\ Receiver w/ 2\ Ball Set (Black)

  • Rated to tow 6000 lbs gross trailer weight , this ball hitch offers dependability for your towing setup..
  • 、Versatile use. this trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver..
  • Our ball hitch and the trailer ball have a polished chrome-plated finish. this finish resists damage from rain, dirt, snow, road salt and other corrosive threats.
  • Easy to install. to install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. the rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.
  • drop of about 2 inch to help adjust trailer level.Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver.
Check Stock