Top Trailer Hinge Reviews

36 Trailer Swing Door Hinged Cam Bar Lock Hasp Latch Handle Utility Cargo

(1) 45" Trailer Door Zinc Cam Bar Lock Kit....
Includes: 45" Zinc Hinged Bar, Handle and Hasp....
Mounting Holes are Approx. 37" Inside Holes center to center and 43 1/2" Outside Holes center to center... Hinge Plates Are Approx. 36" Apart , Hinge....
Hinge Mounting Bolt Holes Are Approx. 3 1/4" Center to Center... Bolts and Fasteners are NOT INCLUDED....
Handle Is Approx. 14" Long... Handle Locking Hasp Receiver Is Approx. 5" by 2"... This Item Only Ships Within The 48 US States....

Check Stock

JAMMY 45 Trailer Swing Door Hinged Cam Bar Lock Hasp Latch Handle Utility Cargo

(1) 45" Trailer Door Zinc Cam Bar Lock Kit....
Includes: 45" Zinc Hinged Bar, Handle and Hasp....
Mounting Holes are Approx. 37" Inside Holes center to center and 43 1/2" Outside Holes center to center... Hinge Plates Are Approx. 36" Apart , Hinge....
Hinge Mounting Bolt Holes Are Approx. 3 1/4" Center to Center... Bolts and Fasteners are NOT INCLUDED....
Handle Is Approx. 14" Long... Handle Locking Hasp Receiver Is Approx. 5" by 2"... This Item Only Ships Within The 48 US States....

Check Stock

Trailer Gap Transition Flap

Powder coated all aluminum 1/8" thick with piano hinge.
Covers the space between your trailer door and trailer floor.
Comes in (2) 42" sections for more economical shipping.

Check Stock

1 Pair Heavy Duty Barrel Gate Hinge 5 inches, Door Hinge Barrel Style for Swing Gate, Trailer Ramp Gate 450lb Capacity - Weld On Install

MATERIAL: The door hinge made of cold rolled steel, strong and corrosion-resistant.
SIZE: Total length is 5 inches, barrel diameter is 1.2 inch and pin diameter is 1 inches, mounting plate gap is 1.2 inches.
each gate hinge can easily hold up to 450 lbs.
Matte black coating and durable thick steel material giving it a longer service life and anti- rust features..
EASY TO INSTALL: Welding required for installation, better remove the black powder coat on the mounting plate before welding.
GREAT FOR: Heavy duty swing gate, trailer ramp/ trailer gate, can hold up the gate well and prevent the gate from sagging.

Check Stock

Skelang 2-Set Gate Hinge 7”, Weld-on Hinge Barrel Style for Swing Gate and Trailer Ramp Gate, Total Load Capacity 4400 Lbs

MATERIAL: The barrel gate hinge is made of cold rolled steel and covered black electrostatic powder coating, rust and corrosion resistant.
SIZE: Total length is 7 inches, barrel diameter is 1-3/8 inches and pin diameter is 3/4 inches, mounting plate gap is 1-1/2 inches.
SMOOTH ROTATION: The gate hinge pair features grease fitting and an internal ball bearing, making for a smooth and squeak-free operation.
EASY TO INSTALL: Welding required for installation, better remove the black powder coat on the mounting plate before welding.
GREAT FOR: Heavy duty swing gate, trailer ramp/ trailer gate, can hold up the gate well and prevent the gate from sagging.

Check Stock

Kay 36\ Aluminum Cam Bar Lock Assembly SS Hasp & mounting Hardware

36" Auminum Trailer Cambar latch & hardware, Non polished finish.
4 - 5/16" x 2" carriage bolts & nylon nuts, washers to fasten hinge to frame.
SS hasp 2" W x 5 1/8" L, padlockable hole w/ mount bolts.
Hinges & handle welded to 1" OD Sch 40 Aluminum pipe, non anodized.
Hinge pin of corrosion resistant material to prevent binding.

Check Stock

Kay 36\ Zinc Cargo Trailer Door CamBar Latch Tamper Proof Hinge & Mounting Hardware

36"L Zinc Plated Tamper Proof trailer cambar latch.
Unique hinge design covers center bolt to deter removal.
Padlockable hasp w/ 2 - 5/16" x 2" Carriage bolts w/ nuts to secure hasp to door.
6 - 5/16" x 2" carriage bolts, nylon nuts & washers to secure hinge to door frame.

Check Stock

Bobco Metals Steel 7\ Barrel Gate Hinges for Heavy Gates & Doors - Welding on Larger Iron or Steel Gates Up to 900 Pounds - Grease Zerk Fitting - Steel Barrels & Copper Pin - 1 Pair

Material : 5 inch barrel door hinges are made of high quality cold rolled steel, 900 lb capacity per pair.
Strong & Corrosion-resistant: Black finish and durable thick steel material give it a longer service life and anti-rust features.
Smooth Rotation: The gate hinge shaft is smooth and can rotate freely back and forth, ensuring smooth operation and squeak-free operation.
Application Scenarios: Ideal for heavy duty flat doors, trailer ramps/trailer doors, supports the gate well and prevents the gate from sagging.
Easy to Install: door hinge installation requires welding, it is best to remove the black powder coating on the mounting plate before welding.

Check Stock

ZOENHOU 12 PCS 4 x 3 Inch Black Non Mortise Door Hinges, Heavy Duty Brushed Nickel Flush Door Hinges, Stainless Steel Door Hinges with Screws

THICK HINGE - The door hinge is made of thick stainless steel, the door hinge with good load bearing, solid and durable, not easy to deform. Surface electroplating treatment is not easy to rust..
SMOOTHLY & MUTE - The flush door hinges can rotate 360 °. Bearings with beads can strengthen the bearing capacity, and it is smooth and free to open and close the door. These brushed nickel hinges not get stuck or stagnate as other hinges..
SLOT-FREE INSTALLATION - To replace the old door hinges with these non-mortise door hinges. unlike the traditional hinge, the door hinge is not necessary to groove in the door and door frame and can be installed directly. And no signs of wear or damage..
EASY TO INSTALL - These brushed nickel hinges with screws, the heat-treated screws are not easy to slide when you install the door hinges. Precipitation screw holes can keep stable installation..
WHAT YOU WILL GET - You will receive 12 (6 pack, 2 pcs/ pack) stainless door hinges with 96 solid mounting screws. The size of the door hinge is 4 x 3 inch, thick is 2.5 mm. Great for a trailer, mobile home, camper, RV, etc..

Check Stock

Barrel Gate Hinge 7\ Heavy Duty Grease Zerk fitting Welding Plate (Lot 2 Pair)

Seven Inch Barrel Gate Hinges include: 1 male barrel, 1 female barrel, steel ball and grease zerk fittings. The welding plates are steel and hinge pins are high quality copper. Holds up to 900 pounds..
Each hinge set measures 7" long and 1.5" wide. The height of the hinge is 1.625". Each welding plate measures 1.94" long and 1.25" wide. The thickness of the plates is 0.375"..
Easy to Mount - Easy to attach to gate or door and the mounting posts. Can be used with spacers. Clearly defined mounting plates make it easy to know how far along to weld. Pre-painted black..
Each pair of barrel gate hinges holds up to 900 pounds. They are perfect solutions for driveway or security gates, swinging security doors, trailer gates, and more!.
Hinges slide apart easily if you need to temporarily remove the gate or door, and slide back together just as easily..

Check Stock

4 Pcs Weldable Barrel Hinges 4⅛x1 LxW Heavy Duty Steel Weld On Bullet Gate Hinge 500 lbs Load Capacity for Metal Swing Door,Trailer Ramp Gate,Windows ½ Dia Pin,Ball Bearing Detachable Hinges

Material：Heavy duty weldable barrel hinges are made of carbon steel Q235B, high strength and hardness for long service life..
Size：4⅛ x 1 inch / 105 x 24 mm (L x W), ½ inch (14 mm) diameter Pin. 500 lbs load capacity..
Smooth & Mute：Welded detachable hinges with ball bearing can be rotated 360 degrees, low friction, more smoother and quieter..
Application：Male to female door hinge can widely for sliding door hinges, metal door, swing gate, trailer ramp gates, windows or anywhere you need a hinge..
Easy to use：Hinge pins are welded to either the outer frame or the gate/door and then inserted into the welded hinge pin to create custom, heavy-duty hinges..

Check Stock

Heavy Duty Gate Hinges 7 Inches- 2 Pack Weld On Install Black Iron Barrel Hinge 900lbs Capacity for Swing Door Trailer Ramp Metal Driveway Gate Drive Gate

Solid Heavy Duty Hinges: Made of durable solid steel, we offer 2 size for you to choose : 7inch and 5 inch barrel hinges, the 7 inch hinge can hold up to 900 lbs capacity and 5 inch hinge can hold up to 450 lbs capacity..
Weld on Install - This metal gate hinge is perfect for heavy duty swing gate, trailer gate ramp, driveway gate and the extra thick back plate make it can be easily welded on..
Smooth Swing Design: Features grease fitting nipple keep the internal ball bearings lubricated, making this hinges swing smoothly and extending the working life of the gate hinges..
Anti Corrosion & Rust-Resistant: Matte black coating finish surface, this heavy duty barrel hinges are suit for outdoor and indoor using..
What You Get: 2 pack heavy duty barrel hinges , our 12 month 100% money back guarantee and friendly customer service..

Check Stock

Bobco Metals Steel 5\ Barrel Gate Hinges for Heavy Gates & Doors - Welding on Larger Iron or Steel Gates Up to 450 Pounds - Grease Zerk Fitting - Steel Barrels & Copper Pin - 2 Units

5" Barrel Gate Hinges are perfect for mounting a wide variety of gates and doors. Each hinge has four parts: 1 male barrel, 1 female barrel, steel ball and grease zerk fittings. The hinges with attached welding plates are made from steel. The hinge pins are high quality copper..
Each hinge set measures 5" long and 1" wide. The height of the hinge is 1.25". Each welding plate measures 1.94" long and 1" wide. The thickness of the plates is 0.375"..
Easy to Mount - these barrel hinges are easy to attach to your gate or door and the mounting posts. Clearly defined mounting plates make it easy to know how far along to weld. They are also easy to use with spacers to allow gates or doors to open as far as the post will allow. All hinges come pre-painted black, but are easy to repaint if you prefer a more neutral shade..
Each pair of barrel gate hinges holds up to 450 pounds. They are perfect solutions for driveway or security gates, swinging security doors, trailer gates, and more!.
Hinges slide apart easily if you need to temporarily remove the gate or door, and slide back together just as easily..

Check Stock