Top Track Flange Bolt Reviews

maXpeedingrods New GT25 GT28 GT2871 Turbo Charger 350BHP+ 0.64 A/R, GT2860 SR20 CA18DET 5-Bolt Flange Universal Turbocharger for 1.5L-2.0L Engine Water + Oil Cooled Turbo W/Gaskets

  • 【Application】：Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.5L-2.0L engine.
  • 【Specification Size】Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange / Exhaust (Downpipe) Flange: 5-Bolt Flange.
  • 【Horse Power】: Boost Horse Power up to 350BHP.
  • 【Cooling Type】: Water and Oil Cooled. Oil Restrictor: Yes . [Oil Thread Size: M12*1.25 & Water Thread Size: M8*1.25].
  • 【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the specifications and verify compatibility prior to placing your order. 2. Some modification may be required, professional installation is highly recommended (No Instruction Included).
Check Stock

Exhaust Flange Bolts, Quick Fix Exhaust Flange Exhaust Flange Spring Bolt Repair Pipe Kit Quick Fix 2.25in ID to 2.25in OD Universal Stainless Steel 2002 Tacoma Exhaust Flange Bolts

  • Application: Exhaust spring bolt flange is universal for most vehicles and can repair your car very well and effectively..
  • Standard Specification: Quick fix flange repair pipeline assembly, Exhaust Flange Pipe meets strict quality control standards and can be used reliably..
  • Excellent Quality: Universal Exhaust Flange is made of high quality stainless steel material for perfect durability and strength, not easy to deform, has long service life..
  • Easy to Use: Quick Fix Exhaust Flange is easy to use with equipped springs and bolts, wonderful replacement for the previous old or broken one..
  • Function: 2.25in ID to 2.25in OD exhaust spring bolt flange, used for connection between pipe ends..
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

[2-Pack] SBTRD204-12 - 3/4\ Bore 3-Bolt Mounted Flange Block Unit, Bearing SB204-12G, Cast Iron Housing TRD204, Bolt Size M8 (0.3125 inches)

  • ✔️ [Parts] - 3-Bolt Mounted Flange Block Unit.
  • ✔️ [Insert Bearing] - Bearing Number SB204-12G, Inner Diameter 3/4".
  • ✔️ [Housing] - Cast Iron Housing TRD204.
  • ✔️ [Quantity in Package] - 2 Pieces of 3-Bolt Mounted Flange Block Unit.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Exhaust Flange, 2inch Universal Flat Oval Split Exhaust Flange Connection Repair Kit Low Carbon Steel Exhaust Downpipe Flange Replacement Accessory

  • Function: This 2-inch flat elliptical exhaust flange provides an effective fixing solution for the exhaust system, removing the intercooler system and turbine parts, such as charging pipes, intake pipes, diesel engines, turbochargers Compressor and heavy-duty exhaust system, etc..
  • Practical Exhaust Flange Repair Kit: The diameter of the center hole of this product is about 2 inches, and the oval bolt hole is about 2 inches. It has the characteristics of fine workmanship, high precision, high sensitivity, practicality and reliability..
  • Great Quality Low Carbon Steel Material: Our exhaust flange is made of high-quality low-carbon steel, which can ensure high hardness, rust resistance, effectively provide services while ensuring long-term use, and has good practicability..
  • High Precision: Our exhaust flanges are produced in strict accordance with the process, and each part is precision processed to achieve precise tolerances to achieve trouble-free performance. Old or damaged adapters can be replaced directly. Please rest assured to buy..
  • Easy Installation: This exhaust flange can be used without welding or cutting the exhaust pipe, just connect it to the flared pipe, and then bolt it to the existing flange you need to connect That's it, the installation st....
Check Stock

EVIL ENERGY 3.0 Inch V Band Clamp for Flange Kit Stainless Steel

  • [Size] Fit for EVIL ENERGY 3.0inch Flange..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange..
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

Walker Exhaust 36128 Exhaust Flange Repair Kit

  • Flange Thickness-0.430″, Material-Steel, Finish-Bare,.
  • Designed to work seamlessly with Walker aftermarket replacement parts.
Check Stock

Universal Turbo Turbocharger T3 T4 T04E A/R .50 A/R .63 V-band Oil 1.5-2.5L SCB

  • Exhaust (Downpipe) Flange: V-Band Flange.
  • Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns.
  • Horse Power: Boost Horse Power up to 420HP.
Check Stock

Frigidaire FF13DISPC1 1.25 HP Corded Garbage Disposer for Kitchen Sinks

  • Safer Disposal with Silver Guard: Powerful Silver Guard magnetic ring captures most metal objects before they enter into the disposer chamber..
  • Torque Master Powerful Grinding System: Instant, high speed-torque powers through tough scraps and food waste. Your disposer’s system works to....
  • Quietest, High Powered Performance: Designed for maximum sound reduction with fully insulated sound shell..
  • Easy to Install Design: Quickly install your disposer to the existing 3-bolt sink mount flange or use the provided 3-bolt mount flange. Compatible....
Check Stock

3“ Exhaust Gasket 2 Bolt for 3 Inch Muffler Flange Manifold 120-07610-0002 High Temperature 2X

  • For 3"/ 76.2mm flange ID exhaust pipe, 3" 2-Bolt Flanges.
  • Bolt hole size: Center to center 105mm/4.13". Inner bolt to Inner bolt 90mm/3.55", Outer bolt to outer bolt 121mm/4.76".
  • For implications smaller than 12mm or 1/2" Bolt hardware.
  • 5 Layer Galvanized Sheet with Graphite in Construction, 2mm/.078" total gasket thickness..
  • Heavy duty for high temp silencer applications. Comes in 2 pieces in nylon bag..
Check Stock