Top Toyota Tool Reviews

THIKPO 3/8 inch 64mm 14 Flute Oil Filter Wrench for 2.5-5.7L Engines with Toyota's Cartridge Style Oil Filter System, Oil Filter Cap Removal Socket Tool for Toyota, Lexus, Scion

  • This 3/8" 64mm 14 flute Toyota oil filter cap removal tool is made of premimum 6065 aluminum alloy, which make it tough enough to provide great power to rotate and replace the extremely tight original oil filter cap..
  • Surface of the oil filter wrench is treated with a high quality black anodized finish to prevent corrosion. It greatly increases friction and durability of the tool, and will highly extend the serves life..
  • This THIKPO oil filter wrench is used for vehicles that use 15620-31060, 15620-36010, 15620-36020 oil filter housing cap and 04152-YZZA1, 04152-YZZA4, and 04152-YZZA5 Toyota oil filter system, including the new 2GRFKS 3.5L Tacoma and 8AR-FTS 2.0L in the NX200t and RC200t..
  • The oil filter cap removal tool perfect fit most of vehicles equipped with 2.5L to 5.7L engines, such as Toyota, Lexus , Scion RAV4, Camry, Tundra, Highlander, Sienna, 4Runner, Avalon, Tacoma, IS250, RX350and others which use Toyota's cartridge style oil filter system..
  • WARRANTY from THIKPO - This is NOT a genuine part, it's a aftermarket replacement part. Please feel free to contact us if you have any questions about our products or serves, we will try the best to help you..
Check Stock

Oil Filter Drain Tool Oil Filter Release Hose Tube Pipe Fit for Toyota, Lexus, Scion 2.0L - 5.7L Engines with Cartridge Style Oil Filter System

  • PREMIUM QUALITY: This tool made of high quality heavy brass and include one 39 Inch PVC hose. Allows you to direct the oil into your oil disposal container, help you cut down on the mess even further. Fits Toyota Filter Housing Part# 15620-36020 & 15620-36010..
  • INSTRUCTIONS：you simply remove the drain plug of the oil filter housing and screw in the tool in the closed position, and then turn the wheel to the open the valve to let the oil drain out. When the oil finishes draining, turn the wheel again to close the valve, remove the tool, and then proceed to remove the oil filter housing as normal..
  • FEATURES ADN ADVANTAGES：changing the cartridge type Toyota oil filters is messy compared to their old spin on oil filters. After using this tool to empty the oil filter housing, the job of changing the oil filter cartridge is a lot neater ..
  • FITS THE FOLLOWING VEHICLE MODELS: Fit for Toyota, Lexus, Scion 2.0L - 5.7L Engines with cartridge style oil filter system. If you are not sure whether the oil filterdrain tool will fit, please contact us before purchasing..
  • WHAT YOU'LL GET: 1x Engine Oil Drain Hose, Place order with 100% confidence, we provide 1 click refund for our valued customers in 3month. Please feel free to contact us if you have any questions and....
Check Stock

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • 1X crankshaft damper pulley holding tool.
  • Camshaft Pulley Holder Tool: Used it to held the pulleys when remove camshaft pulleys, have two grooved pins to hold camshaft sprockets stationary to remove the bolts, requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
Check Stock

Universal Cam Pulley Holder Tool & Crankshaft Damper Pulley Holding Holder Harmonic Tool for Lexus & Toyota

  • Fitment – The Universal Cam Pulley Holder works on many Camry, Toyota, Nissan, Mazda, OHC and many others. The Harmonic Damper Pulley Holding Tool work on Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ..
  • Harmonic Damper Pulley Holder – Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines..
  • Cam Pulley Holder – Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tightening/loosening the bolt..
  • SUPERIOR QUALITY – Made of high quality steel with black finish for durability and perfect match, resisting rust and corrosion, ensures a long term service..
Check Stock

OBD2 Diagnostic Scan Tool 1.5M Mini Cable Diagnostic Tool Cable Scanner for Toyota TIS Lexus Techstream

  • 【Support versions】 The VCI diagnostic tool  cable support all versions of OEM Toyota TIS Techstream softwares including the Latest v13.00.022 !.
  • 【Multifunction】 This code reader Toyota support Double K-Line.
  • Detects battery voltage and contact via by control line.
  • 【High performance and reliability】 The VCI OBD2 diagnostic scan tool cable is high performance and reliability. It is not only with ARM cpu inside....
  • 【Suitable Protocols】 KWP 2000 ISO 14230-4.
  • 【PC Requirements】 The VCI cable works on 32 bit of windows XP & windows7 and only 1 GB of free HDD space..
Check Stock

E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts

  • FITMENT INFORMATION - Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
  • KEEP CRANK PULLEY STILL - Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota & Lexus engines.
  • ROUND EDGE WITH PRECISION FIT HOLE - Small enough so that no need to remove radiator or other components to access and remove Harmonic Damper Pulley, hole in center of tool allows access to removal of crank shaft bolt, users are available to hold crankshaft while tightening the crank bolt with a torque wrench.
  • PACKAGE INCLUDED - 1 crankshaft damper pulley holding holder tool and 2 crank bolts.
  • 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days, no questions asked money back guarantee with 1 year’s warranty.
Check Stock

EEEkit 22 Pin OBD1 to 16 Pin OBD2 Convertor Adapter Cable for Toyota Diagnostic Scanner Black with Two Connectors

  • TWO CONNECTORS: The cable has two connectors:one is Toyota 22 Pin connector,another is 16 Pin OBD OBDII connector..
  • 22 PIN TO 16 PIN INTERFACE: The cable can be used for converting connection from Toyota 22 Pin to OBD OBDII 16 Pin interface..
  • DIAGNOSTIC TOOL: Allows you use OBD OBDII diagnostic tools working with your Toyota vehicles with 22 Pin interface..
  • WIDE APPLICATION: Application,Vehicle fault diagnosis instrument,Vehicle fault detector,Engine fault diagnosis..
  • PACKAGE INCLUDED: 1 x 22Pin to 16Pin OBD1 to OBD2 Connect Cable. If you have any question, please contact us. We offer a 30-days money-back guarantee....
Check Stock

TUPARTS Driveshaft Center Support Bearing Fit for 1993-1998 for Toyota T100 1995-2012 for Toyota Tacoma 2000-2010 for Toyota Tundra

  • Replacement Fit For - 1993 1994 1995 1996 1997 1998 for Toyota T100 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 for Toyota Tacoma 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 for Toyota Tundra.
  • Guarantee - High quality rubber ring and high grade steel construction guarantee long service life OE process - produce for According to OE standard, ensure the same performance and specification..
  • When to replace - When driving there is noise or vibration, timely check whether the bearings are damaged and the internal teeth are excessively worn..
  • Notice - Please check description carefully or use amazon part finder tool to make sure this item fit your vehicle before placing order.
Check Stock

Samman Bullet Antenna Mast Vehicle Antenna Replacement Truck Car Radio Antenna Compatible with Ford F150 Series F250 F350 Super Duty Raptor Dodge RAM 1500 Classic 2500 3500 Black

  • ... ] 8 types of different screw adapters ends for your vehicle. Compatible with Ford F-Series (1990-2020), Ford Ranger (1990-2012), Ford Explorer (1990-2010).
  • Dodge RAM Trucks (1994 – 2018), Dodge Dakota, Dodge Durango.
  • Jeep Grand Cherokee (1993-2013), Jeep Cherokee (2014-2019).
  • Toyota Tundra (2000-2020), Toyota Tacoma (1995-2015), Toyota Sienna (1998-2014), Toyota 4runner (2010-2017), Toyota FJ Cruiser (2006-2014).
  • [ PACKAGE INCLUDE ] 1 x antenna, 8 x different size screw adapters, 2 x ring. The thread type please refer to the picture. (If you have any question, please feel free to contact us !).
Check Stock

Samman Silver Bullet Antenna Universal Billet Replacement Car Antenna Truck Radio Vehicle Short Antenna Compatible with Ford F150 F250 F350 Super Duty Raptor Dodge RAM 1500 2500 3500 Jeep Cherokee …

  • ...ed 8 types of different screw adapters ends for your vehicle. Compatible with Ford F-Series (1990-2020), Ford Ranger (1990-2012), Ford Explorer (1990-2010).
  • Dodge RAM Trucks (1994 – 2018), Dodge Dakota, Dodge Durango.
  • Jeep Grand Cherokee (1993-2013), Jeep Cherokee (2014-2019).
  • Toyota Tundra (2000-2020), Toyota Tacoma (1995-2015), Toyota Sienna (1998-2014), Toyota 4runner (2010-2017), Toyota FJ Cruiser (2006-2014).
  • [ PACKAGE INCLUDE ] 1 x antenna, 8 x different size screw adapters, 2 x ring. The thread type please refer to the picture. (If you have any question, please feel free to contact us !).
Check Stock

Yoursme Oil Filter Drain Hose Tool for Toyota, Lexus, Scion 2.0L - 5.7L Engines

  • FUNCTION: This tool fits Toyota 2.0L to 5.7L engines that use the cartridge style oil filter system. It makes the oil change process much cleaner by draining the filter housing prior to removal preventing oil spills..
  • FITMENT: Works on many late model Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza Toyota vehicles..
  • SIMPLE TO USE: Simply screw the tool into the drain valve on the oil filter housing, and then tighten the knurled nut to drain the housing. Once the housing is drained it can be removed to replace the filter without the usual mess..
  • FEATURE: The 3 piece all metal body connects to a 30” long drain hose that allows you to direct the oil into your oil disposal container..
  • 100% SATISFACTION GUARANTEE: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months’ warranty..
Check Stock

Nilight 166 Pcs Car Retainer Clips &Screw Grommets - 12 Most Popular Sizes & Applications for GM Toyota Honda Nissan Mazda - with Fastener Remover,2 Years Warranty

  • 【MADE OF HIGH QUALITY NYLON】- Made of very durable nylon that will not break instantly like other brands..
  • 【12 MOST COMMON SIZES】- Covers 5mm to 10mm hole sizes clips and screw grommets for #6 #10 #12 and #14 screw sizes for exact OEM replacement,Great for door, fender, hood & bumper for Toyota, Lexus & Mazda.
  • 【SAVE TIME, FRUSTRATION AND MONEY】- Very durable nylon Toyota Tacoma clips and Toyota inner fender clips won't break instantly.
  • 【TOUGH FASTENER REMOVER】- Durable Plastic and Metal material that has advantage of high abrasion resistance,allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them..
  • 【PACKAGE INCLUDES】-166pcs Clips & Screw Grommets with 1pc Plastic Storage Case, 1pc Fastener Remover Removal Tool.
Check Stock

TOYOTA Genuine OEM 00279-0WQTE-01 Oil (4 QUARTS)

  • ...rovide maximum torque with multiple contact points to rotate the extremely tight oil filter cover, and cooperate with a 27mm socket or 3/8” (10mm)drive ratchet wrench to loosen it..
  • APPLICABLE MODELS: Oil filter cover removal tool is suitable for most car models, such as Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and More vehicles equipped with 2.5L to 5.7L engine that that use Toyota's cartridge style oil filter system. But the filter wrench does not fit the car with disposable conventional spin-on filters and 1.8L engine oil filter cap..
  • DESIGN: The bottom edge of the oil filter wrench has 4 slots for a perfect match with the vehicles using 15620-31060, 15620-36010, 15620-36020 oil filter housing covers. The tooth-like structure inside the 14 flute oil filter wrench can fully fit the filter during the process of disassembling and assembling the filter to prevent slippage so that the caps can be removed easily when you unscrew the oil filter housing with extreme force, and will not damage the fragile plastic filter cartridges..
  • PRODUCT GUARANTEE: You can enjoy our first-class service with 12-MONTH Warranty an....
Check Stock