Top Totalboat Marine Varnish Reviews

TotalBoat-496608 Lust Marine Varnish, High Gloss and Matte Finish for Wood, Boats, Outdoor Furniture (Matte, Gallon)

  • MARINE GRADE VARNISH imparts a rich, clear amber tone that enhances wood grain.
  • creates a durable, waterproof finish that won't fade.
  • ideal for interior and exterior wood, brightwork on boats & outdoor furniture.
  • CLASSIC SPAR VARNISH WITH A MODERN FORMULA: High-build, fast-drying formula allows rapid recoating, multiple coats per day and no sanding between coats. Sand lightly before the final coat - be done in a little over 1 day.
  • DURABLE FLEXIBLE COATING: Premium, oil-based formula won't crack or peel when wood expands and contracts with changes in temperature.
  • perfect for all types of marine and household woods.
  • CHOOSE HIGH GLOSS OR MATTE FINISH: For a high gloss varnish finish apply 6-8 coats of Lust Gloss.
  • for a smooth satin finish, build with coats of Lust gloss varnish.
  • AVAILABLE IN HIGH GLOSS OR MATTE in Pint, Quart and Gallon sizes. Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling).
  • xylene (spraying). Coverage: 360-400 sq. ft./gallon.
Check Stock

TotalBoat Gleam Marine Spar Varnish, Gloss and Satin Polyurethane Finish for Wood, Boats and Outdoor Furniture (Satin Low-Sheen Pint)

  • CLASSIC MARINE VARNISH contains premium tung oil, phenolic resins for a beautiful, warm, transparent amber finish on all types of interior and exterior wood.
  • DURABLE SPAR VARNISH is the ideal outdoor wood sealer and waterproof finish on brightwork on boats, strip canoes, kayaks and outdoor wooden bar tops, garage doors, furniture and more.
  • EASY TO USE, SELF-LEVELING, DRIES FAST: Recoat in 1 hr. @ 72°F.
  • cured varnish remains flexible, expands and contracts with the wood during seasonal humidity and temperature changes.
  • CHOOSE GLOSS OR SATIN FINISH: For a high gloss varnish finish apply 4-6 coats of Gleam Gloss.
  • for a sleek satin finish, build with coats of Gleam gloss varnish and use Gleam Satin for the final coats.
  • AVAILABLE IN GLOSS OR SATIN (low-sheen), in Pint, Quart and Gallon sizes. Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling).
  • xylene (spraying). Coverage: 250 sq. ft./gallon.
Check Stock

TotalBoat-495709 Gleam Marine Spar Varnish, Gloss and Satin Polyurethane Finish for Wood, Boats and Outdoor Furniture (Satin Low-Sheen Gallon)

  • CLASSIC MARINE VARNISH contains premium tung oil, phenolic resins for a beautiful, warm, transparent amber finish on all types of interior and exterior wood.
  • DURABLE SPAR VARNISH is the ideal outdoor wood sealer and waterproof finish on brightwork on boats, strip canoes, kayaks and outdoor wooden bar tops, garage doors, furniture and more.
  • EASY TO USE, SELF-LEVELING, DRIES FAST: Recoat in 1 hr. @ 72°F.
  • cured varnish remains flexible, expands and contracts with the wood during seasonal humidity and temperature changes.
  • CHOOSE GLOSS OR SATIN FINISH: For a high gloss varnish finish apply 4-6 coats of Gleam Gloss.
  • for a sleek satin finish, build with coats of Gleam gloss varnish and use Gleam Satin for the final coats.
  • AVAILABLE IN GLOSS OR SATIN (low-sheen), in Pint, Quart and Gallon sizes. Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling).
  • xylene (spraying). Coverage: 250 sq. ft./gallon.
Check Stock

TotalBoat-482869 Lust Marine Varnish High Gloss and Matte Finish for Wood Boats Outdoor Furniture High Gloss Quart

  • MARINE GRADE VARNISH imparts a rich, clear amber tone that enhances wood grain.
  • creates a durable, waterproof finish that won't fade.
  • CLASSIC SPAR VARNISH WITH A MODERN FORMULA: High-build, fast-drying formula allows rapid recoating, multiple coats per day and no sanding between....
  • DURABLE FLEXIBLE COATING: Premium, oil-based formula won't crack or peel when wood expands and contracts with changes in temperature.
  • CHOOSE HIGH GLOSS OR MATTE FINISH: For a high gloss varnish finish apply 6-8 coats of Lust Gloss.
  • for a smooth satin finish, build with coats of Lust....
  • AVAILABLE IN HIGH GLOSS OR MATTE in Pint, Quart and Gallon sizes. Thinner: TotalBoat Special Brushing Thinner 100 (brushing/rolling).
Check Stock

TotalBoat Epoxy Primer Thinner 200 Marine Solvent Quart

  • Marine solvent specially formulated for thinning or reducing TotalBoat TotalProtect, TotalBoat Aluminum Boat Barrier Coat, and TotalBoat 2-Part Epoxy....
  • Perfect for brush, roller, or spray applications.
  • Ideal surface prep solvent wipe for rubberized inflatable materials prior to applying TotalBoat Inflatable Boat Paint.
  • Makes it easy to remove paint from tools and equipment after painting is done.
  • Available in Quart size. 100% made in the USA. Use only with the TotalBoat products specified.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

TotalBoat Wood Sealer - Marine Grade Sanding Sealer and Pre Varnish Primer for Boats and Wood Quart

  • ONE-PART PRE-VARNISH WOOD SEALER for new or bare wood.
  • fills and seals the wood grain, and creates a smooth, level surface for varnish.
  • PROVIDES PROTECTION DOWN TO THE WOOD GRAIN: Prevents wood from cracking and checking, and ensures varnish won't peel or delaminate. Creates a stable....
  • EASY TO APPLY by brushing, rolling, or spraying on interior or exterior bare wood surfaces. If thinning is needed, for brushing, use 5-10% TotalBoat....
  • DRIES FAST, NO SANDING BETWEEN COATS: Quick dry, deep penetrating sealer lets you recoat in as little as 2 hours in temperatures above 72°F, and does....
  • AVAILABLE IN QUART SIZE. For interior and exterior use under 1-part varnish or polyurethane.
Check Stock

Penofin Marine Exterior Oil Wood Finish - 5 Gallons

  • Premium Varnish: Our marine varnish is a high-build coating designed for use as a marine epoxy and exterior wood varnish on surfaces like railings, doors or any surface where a clear, durable gloss finish is desired.
  • Features: Formulated to provide exceptional exterior durability for the most demanding environments, this spar varnish contains state-of-the-art UV absorbers designed to keep wood looking beautiful even with constant exposure to strong sunlight.
  • Versatile Application: Use a high-quality, natural bristle varnish brush to apply the varnish to boats, outdoor furniture or doors.
  • Tips and Tricks: Our spar urethane varnish is resistant to scratching and marring.
  • You can spray varnish after taking proper precautions and by applying proper techniques.
  • For Best Results: Weather conditions or sudden drops in temperature will affect any varnish.
  • Do not apply before morning dew has dried, and stop well before dusk.
Check Stock

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas (Gray, Gallon)

  • ...roblems before they become costly damage, or find items accidentally dropped into the bilge.
  • both colors offer excellent coverage and hide.
  • EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
  • prime prepared metals with TotalBoat TotalProtect.
  • for fiberglass prime with TotalProtect if desired.
  • for wood use TotalBoat Topside Primer if desired.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
  • THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100.
Check Stock

TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Black, Gallon)

  • ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection.
  • copper biocide keeps barnacles and mussels from clinging to hull bottoms.
  • ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions.
  • EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat.
  • durable finish withstands trailering & beaching better than traditional ablative paints.
  • FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS.
  • because the ablative coating wears away during the season, there’s no paint buildup, which makes your bottom paint job easier next season.
  • EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller – TotalBoat Special Brushing Thinner 100.
  • spray equipment – TotalBoat Spray Thinner 101.
  • AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
  • this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only.
Check Stock

TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Red, Gallon)

  • ECONOMICAL ANTIFOULING BOTTOM PAINT provides excellent single-season protection.
  • copper biocide keeps barnacles and mussels from clinging to hull bottoms.
  • ideal for sailboats, power boats, fishing and work boats in all types of saltwater conditions.
  • EFFECTIVE MARINE PAINT prevents barnacles from attaching to your hull by releasing fresh biocide as water moves under the boat.
  • durable finish withstands trailering & beaching better than traditional ablative paints.
  • FOR USE ON PROPERLY PREPARED FIBERGLASS, WOOD, STEEL, AND IRON BOAT BOTTOMS.
  • because the ablative coating wears away during the season, there's no paint buildup, which makes your bottom paint job easier next season.
  • EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller - TotalBoat Special Brushing Thinner 100.
  • spray equipment - TotalBoat Spray Thinner 101.
  • AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
  • this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only.
Check Stock

TotalBoat Underdog Marine Antifouling Bottom Paint for Fiberglass, Wood and Steel Boats (Blue, Gallon)

  • ... during the season, there's no paint buildup, which makes your bottom paint job easier next season.
  • EASY TO APPLY: Use a natural bristle brush, or a 3/16” nap or foam solvent-safe roller, or use airless or conventional spray equipment. THINNING (10%): brush/roller - TotalBoat Special Brushing Thinner 100.
  • spray equipment - TotalBoat Spray Thinner 101.
  • AVAILABLE IN GALLON SIZE IN BLACK, BLUE AND RED COLORS. Coverage: 500 sq ft per gallon.
  • this product is a marine paint intended for antifouling use on boats, applied to hulls and boat bottoms below the waterline only.
Check Stock