Top Torque Handle Reviews

ABN Torque Multiplier Wrench – Torque Multiplier 1 Inch Drive Lug Nut Wrench Torque Amplifier Lug Nut Remover

  • REMOVE RUSTED LUGNUTS WITH EASE: Forget about fighting those rusted lug nuts when trying to remove a tire on the side of the road.
  • Not even your extended cheater bar can help now.
  • Instead, use the ABN Heavy Duty Torque Multiplier Wrench Set to quickly loosen and remove stubborn lug nuts with minimal effort.
  • Suitable for most trucks, buses, RVs, semi-trucks and other heavy duty vehicles (not recommended for small passenger cars).
  • DURABLE TORQUE MULTIPLIER: Constructed of alloy steel, these torque multipliers are designed for maximum strength and longevity.
  • With 1:58 gear ratio bringing 3200 NM, the torque multiplier lug nut wrench set easily produces a sufficient output torque to loosen stubborn nuts with minimal effort.
  • 10.6 inch (26.9cm) rocking bar features a textured rubber foam handle for better grip and increased friction.
  • EASY TO USE: Remove lug nut caps and place correct socket on to the lug nut.
  • Connect cheater wrench to socket and anchor the brace rod against wheel hub or an adjacent lug nut to ensure steady operation and leverage.
  • Attach the handle and turn in the direction you wish to move the nut.
  • 3 inch (75mm) extension bar helps to remove nuts quickly after being loosened.
  • Use the square socket for square duel lug studs.
Check Stock

GEARWRENCH 1/2\ Drive 120XP Flex Head Electronic Torque Wrench with Angle, 25-250 Ft/Lbs - 85196

  • 120XP head provides a 3° ratcheting arc to turn fasteners in narrow spaces.
  • Low profile tube, 15° flex teardrop head, and flush mounted on/off switch allow for better access in tight confines.
  • Digitally tracks torque and angle measurements. Vibrating handle, buzzer, and LCD screen alert when target torque is reached.
  • 3 function modes feature peak torque, angle, and peak angle for additional versatility.
  • 5 torque measurement units provide a readout in ft-lb, In-lb, Nm, kg-m, and kg-cm.
  • 10 Available preset torque settings allow you to quickly access frequently repeated applications.
  • Torque accuracy of +/-2% CW and +/-3% CCW between 20% and 100% of wrench capability angle settings offer +/-1% of reading of angle accuracy.
  • Knurled aluminum handle lets you grip comfortably, while clearly marked midpoint promotes additional accuracy.
  • Meets or exceeds ASME standards and specifications.
  • calibration accuracy warrantied for 90 days.
Check Stock

GEARWRENCH 3/4" Drive Electronic Torque Wrench 70-750 ft/lbs. - 85082

  • “Target Torque Alert” gives a warning as you approach the target torque.
  • vibrating handle, buzzer, and solid LED light indicate when target is reached.
  • 24 tooth teardrop shaped head with on/off switch allow even more access in tight spaces.
  • Handle and housing are oil and solvent resistant, protecting the tool from harmful agents and keeping your hands in place.
  • 5 torque measurement units provide a readout in Nm, ft-lb, in-lb, Kgf-m, and Kgf-cm.
  • Torque accuracy of +/-2% CW and +/-3% CCW between 20% and 100% of wrench capability.
Check Stock

LIBRATON Bike Torque Wrench 1/4'', 5-25Nm, 0.1 Nm Micro, Torque Wrench, Drive Click Torque Wrench Set, Hex, Torx/Star Bit Sockets, Extension Bar, Bicycle Maintenance Kit, Professional Bicycle Tool

  • One Set for All Needs: Libraton bike torque wrench set includes 1/4'' Drive Torque Wrench, hex bit sockets (2, 2.5, 3, 4, 5, 6, 8,10mm), Torx/star bit sockets (T10, T20, T25, T30), 1/4'' extension bar and a storage box. A great set for your bicycle or motorcycle maintenance..
  • Quality Guarantee: The 1/4 torque wrench head is made of chromium-molybdenum alloy (Cr-Mo Steel), higher strength than chromium-vanadium steel (Cr-V steel). Aluminum-titanium alloy handle ensure a comfortable and anti-slip grip. Premium spring-loaded adjustment collar can be locked at the settled torque value automatically, which ensures stable working..
  • Accuracy Guarantee: Over-tightening or over-loosening torque highly causes bolts out of their job. Therefore a high-accuracy torque wrench is always needed. Our drive click torque wrench has a 5-25Nm working range with micro-adjustment to 0.1Nm, which helps you to set the expected torque value as needed. We also made tests on each of our bicycle torque wrenches to make sure pre-calibrated to an accuracy of ±3% (Normal torque wrenches only at ±4% )..
  • Easy to Use: Bicycle torque wrench is equipped with a quick adjustment mechanism making you change the torque value smoothly. And a "Click" sound can clearly tell pre-set torque value....
Check Stock

Vortex Optics Torque Wrench | Riflescope Mounting Kit

  • 【The Most Accurate and Wide Torque Force Range】-- Install components with calibrated precision - 2.0 to 20.0 Newton Meter torque range, ensure that the fittings on your bike are tightened to the correct torque. It arrives pre-calibrated with a guaranteed accuracy of +/-4%..
  • 【Simple and Reliable】-- When the wrench’s pre-set torque value is reached, a simple and reliable mechanical operation inside the handle produces a click you can hear and feel, alerting you to stop applying force..
  • 【Easy to Use and Read】--The torque wrench is user friendly.
  • just pull-down the "locking ring" to unlock. Clockwise increases the value and counterclockwise decreases the value. Then push-up the "lock ring" to lock your required torque. High-contrast Nm scale is easy to read and can be operated both clockwise and counterclockwise..
  • 【High Quality and Considerate Accessories】 -- Anti-skid handle made of high-quality aluminum, with a polished and chrome-plated connector for durability and rust prevention, Constructed from durable and quality materials make it lightweight and compact. Includes 9 bits: Torx (T25, T30) and Hex (2.5, 3, 4, 5, 6,8,10 mm) to meet the most common jobs..
  • 【Professional Tool & 1 year Warranty 】--The click style bike torque wrenc....
Check Stock

18 INCH Craftsman 1/2inch adjustable torque wrench 10lb-150ft lbs

  • “Target torque alert” gives a warning as you approach the target torque.
  • Vibrating handle, buzzer, and solid LED light indicate when target is reached.
  • 72 Tooth ratchet mechanism with a 5° swing arc allows you to turn fasteners in tight spaces.
  • Handle and housing are oil and solvent resistant, protecting the tool from harmful agents and keeping your hands in place.
  • 5 torque measurement units provide a readout in Nm, ft lb, In pounds, kgf m, and kg cm.
  • Torque accuracy of +/ 2 percent CW and +/ 3 percent CCW between 20 percent and 100 percent of wrench capability.
Check Stock

GEARWRENCH 1/2 Flex Head Electronic Torque Wrench with Angle 25-250 ft/lbs - 85079

  • “Target torque alert” gives a warning as you approach the target torque.
  • vibrating handle, buzzer, and solid LED light indicate when target is....
  • 72-Tooth ratchet mechanism with a 5° swing arc allows you to turn fasteners in tight spaces.
  • Handle and housing are oil and solvent resistant, protecting the tool from harmful agents and keeping your hands in place.
  • 3 function modes feature peak torque, angle, and peak angle for additional versatility.
  • 5 torque measurement units provide a readout in ft-lb, In-lb, Nm, kg-m, and kg-cm.
Check Stock

FIX IT STICKS Tightening +/- 10% Accurate 15-65 inch-lbs All-In-One Torque Driver Tool Kit w/ T-Way Wrench Bits Socket Adapters

  • MULTIPURPOSE USE - Choose Fix It Sticks All-in-One Torque Driver, Fix It Sticks All-in-One Torque Driver Kit or Mini All-in-One Torque Driver to tighten down your scope rings, mounts, actions screws, red dot sights, mounting plates, etc. to the correct tongue while in the field, at the range, or at home.
  • NO OVER/UNDER TIGHTENING - Enjoy ultimate performance with lightweight and compact All-in-One Torque Drivers - no more over or under tightening your critical components.
  • EASY ADJUSTMENT - Just turn the drive handle until the hash mark lines up with the torque value you need (from 15 - 65 inch-lbs).
  • in case with Mini All-in-One Torquer Driver just turn the drive handle until the hash mark lines up with the torque value you need (from 6 - 25 inch-lbs).
  • 1/4" BIT & DRIVER COMPATIBLE - These adjustable Torque Drivers accept any standard 1/4" Bit and works with any standard 1/4" Driver.
  • ZIPPERED CASE (KIT ONLY) - The Fix It Sticks All-in-One Torque Driver Kit goes with a zippered carrying case with a holder.
Check Stock

ARES 43011-1/4-Inch Drive Micrometer Torque Wrench - Dual Torque Scales - 40-200 in/lbs (4.52-22.6Nm) - Click Torque Wrench - Ultra Smooth Torque Dialing with High Visibility Laser Etched Markings

  • ITEM SPECIFICATIONS: The ARES 1/4-Inch Drive Micrometer Torque Wrench features dual torque scales with in/lbs and newton meters readings and ranges of 40-200 in/lbs and 4.52-22.6 Nm with an accuracy tolerance of ±3%. The ultra smooth handle rotation with high visibility laser etched markings makes it easy to adjust your specified torque. Designed with longevity in mind, all of our torque wrenches are calibrated before shipping and meet ANSI standards..
  • DESIGN CONSIDERATIONS: This click type torque wrench is designed with ultra smooth torque dialing, and the quick torque change mechanism features a spring loaded pull down knurled collar that secures the torque setting with a positive lock mechanism. The quick release mechanism helps you dial in your torque setting effortlessly and instantly. The click type design alerts you when torque is reach and helps to prevent over-torquing..
  • CONVENIENT STORAGE: This click type micrometer torque wrench comes with a high quality storage case, so you'll always have the perfect place to keep it while it's not in use, and you'll never have to search for it when you need it. This torque wrench features a black nickel finish on the shaft and ratchet, and a red anodized finish on the aluminum machine knurled handle. The ....
Check Stock

ANPUDS 1/4 Inch Drive Click Torque Wrench Set, 20-240 in.lb/5-25 Nm, 21Pcs Bike Torque Wrench Set, Small Lightweight Inch Pound Torque Wrench, 72-Tooth Dual-Direction Bicycle Maintenance Kit

  • 【Lightweight Aluminum Material】The 1/4 torque wrench head is made of chrome-molybdenum alloy, the body and handle is made of 6061 aviation aluminum within compression resistance and oxidation resistance, the biggest feature is very light. The torque wrench weight is only 390g. It is lighter and higher hardness than normal chrome-vanadium steel. And the handle is non-slip..
  • 【High Accuracy Within ±3%】This bike torque wrench features precise scales of 20-240 in.lb with micro-adjustments to 2 in.lb. Fully tested for accuracy according to the requirements of international standard ISO 6789, GB/15729 and ASME B107.14M within an accuracy of ±3%. Every torque wrench set includes a calibration certificate with traceable serial number..
  • 【Safe and Easy to Use】Pull down the lock knob and hold it until the torque value setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value. You will feel the vibrating handle or hear a ‘click’ from the torque wrench when the pre-set torque value is reached, alerting you ‘stop’ applying force. Warm tips: At low in.lb settings under 40 the click can be ‘subtle’. Between ....
Check Stock

Wheeler F.A.T Stix with 12 Screwdriver Bits 5 Torque Limiters and Storage Case for Firearm Building and Maintenance

  • DIMENSIONS: 5.5" L x 5.5" W x 1.5" D and 2.5 lbs.
  • SPECS: ½” socket with ¼” drive bit, torque limiters are in 15, 25, 35, 45, and 65 inch/pounds.
  • VERSATILITY: Also function in Newton Meters 1.7, 2.8, 4.0, 5.1, 7.3.
  • EASE OF USE: This compact preset torque wrench set takes the guesswork out of setting screws at the correct torque. Simply attach the preset torque limiter to the t-handle, insert the desired bit, and set your screw to the right specs.
  • DESIGN: T-handle has a convenient grip and spin section for added comfort during use.
Check Stock

6mm Rotary Angle Grinder Tool Flexible Shaft Fits Flex Shaft Key Drill Chuck Handle Handpiece Accessory Replacement Flex Shaft Electric Drill Rotary Tool (0.3-4mm)

  • 120XP head provides a 3° ratcheting arc to turn fasteners in narrow spaces.
  • Low profile tube, 15° flex teardrop head, and flush mounted on/off switch allow for better access in tight confines.
  • Digitally tracks torque and angle measurements. Vibrating handle, buzzer, and LCD screen alert when target torque is reached.
  • 3 function modes feature peak torque, angle, and peak angle for additional versatility.
  • 5 torque measurement units provide a readout in ft-lb, In-lb, Nm, kg-m, and kg-cm.
  • 10 Available preset torque settings allow you to quickly access frequently repeated applications.
  • Torque accuracy of +/-2% CW and +/-3% CCW between 20% and 100% of wrench capability angle settings offer +/-1% of reading of angle accuracy.
  • Knurled aluminum handle lets you grip comfortably, while clearly marked midpoint promotes additional accuracy.
  • Meets or exceeds ASME standards and specifications.
  • calibration accuracy warrantied for 90 days.
Check Stock

CDI 2503CF3 Drive Computorq 3 Electronic Torque Wrench, 1/2-Inch

  • ✔️CDI Torque Wrench A Snap-On Company Products are Proudly made in the United States of America. Each tool comes with a Certificate of Calibration and custom molded storage case..
  • ✔️The CDI Torque Wrench A Snap-On Company is a micrometer adjustable 1/2" Drive and an English range of 20-150 Ft Lbs and Metric range of 34-197 Nm. The metal handle series offers the user a rugged, industrial strength torque wrench able to withstand the rigors of professional use and all of CDI's click torque wrenches are calibrated for use in both direction..
  • ✔️Handles are lightly knurled for a tough, non-slip grip. Dual scale, calibrated dual direction, Positive lock with spring loaded pull down lock ring. Accuracy: ± 3% clockwise ± 4% CCW of indicated value, CW, from 20% to 100% of full scale..
  • ✔️Fast, accurate and easy to set, Easy-to-read laser marked scales, Most feature quick release buttons which provide good socket retention as well as easy socket removal. Meets or exceeds ASME B107.14-2004, ISO 6789 standards, Individually serialized with matching certificate of calibration traceable to N.I.S.T..
  • ✔️The metal handle series offers the user a rugged, industrial strength torque wrench able to withstand the rigors of professional use and all of CDI's....
Check Stock