Top Top rated Gearbox Products Reviews

Lancer Tactical 9.6V NiMH 1600mAh Butterfly Mini Battery Pack with Mini Tamiya Connector for Airsoft Guns, AEG

  • MATERIALS Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • Polished 6.03 mm tight bore inner barrel for improved air seal and accuracy Full metal Version 2 rear-wired gearbox provides easy battery access and ample space 20mm top optic rail mounts scopes, sights, and magnifiers.
  • Enlarged trigger guard accommodates users wearing gloves One-piece outer barrel provides stability and zero wobble Upgraded gearbox with 18:1 steel gear set and high-speed motor.
  • High capacity magazine holds 300 rounds and only needs one full wind up Retractable crane stock adjusts to meet the battle situation Simple battery placement is sealed with a cover located in the back of the stock.
  • BATTERY Simple battery (9. 6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • Fires in full-auto and semi-auto, with a functional safety Full metal version 2 gearbox with an upgraded torque motor 20mm top optic rail mounts scopes, sights, and magnifiers.
Check Stock

Drfeify RC Gearbox Bottom Plate, Metal Gearbox Bottom Plate Available for AXIAL SCX10 / TFL Carframe RC Accessories

  • NOT BURDEN FOR RC CAR : The gearbox base is lightweight and does not burden your RC model car..
  • DURABLE TO USE : The gearbox base is made of high-quality aluminum alloy and it is sturdy and durable, and screws and nuts are presented as a gift..
  • PERFECTLY FIT : The RC gearbox base is exquisitely crafted and perfectly sized. The gearbox base plate is easy to install and remove and fits perfectly into your RC car..
  • MANY SCREWS AND NUTS PROVIDED : Many screws and nuts are provided for your own installation and repair, with enough parts to replace you..
  • UPGRADE ACCESSORY : If the original parts of the model car are damaged or too old, our products are an ideal replacement for your previous parts..
Check Stock

Qiilu Transmission Oil Pressure Switch 28600-RCL-004 Car Auto Trans Oil Pressure Switch Replacement Fit for Honda Accord for CR-V

  • Scope of Application --- The gearbox oil pressure switch Fits for ACURA RSX 2002-2006, Fits for ACURA TSX 2004-2008, Fits for HONDA ACCORD 2003-2007,....
  • Reference OEM --- This gearbox oil pressure switch replaces the OEM number for reference: 28600-RCL-004. Comply with strict quality control standards.
  • High-quality Materials --- The gearbox hydraulic switch is designed and made of high-quality aluminum and ABS, which is stable and durable, and is a....
  • Easy to Install --- The gearbox oil pressure switch is professionally designed, simple to install, and does not require complicated tools. Can replace....
  • Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every product must go through strict....
Check Stock

STEPPERONLINE 5:1 Planetary Gearbox Nema 17 Stepper Motor 1.68A for DIY CNC Robot 3D Printer

  • Bipolar Stepper, Holding Torque: 1.68 Nm , Rated Current/phase : 1.68A , Recommended Voltage: 12-24V.
  • Frame Size: 42 x 42 mm/ 1.65" x 1.65" , Motor Length: 40 mm / 1.57" , Gearbox Length :27.3 mm / 1.07".
  • 4-wires (Black, Green, Blue, Red) , Weight: 460g.
Check Stock

Planetary Gearbox Nema 23 Ratio 10:1 Gear Head Speed Reducer 1/4\ Input fit for 6.35mm Shaft Stepper Motor CNC Router Lathe DIY(10:1)

  • ★Input shaft hole is 1/4" that can match the 6.35mm shaft motor (without key). The output shaft diameter is 14mm.
  • ★The gear head has Nema 23 Input & output flange,suitable for flange 57mm stepper motor and other motors which can completely match the installation size ..
  • ★Rated speed is 3000RPM, 10:1 gear ratio ,the rated holding torque is 15N.m and the Max. holding torque is 25N.m.
  • ★4pcs screws provide for installation , small size gearbox , very convenient for the machine which has limited space for a gearbox..
  • ★Widely used on kinds of machine , lathe ,engraving machine etc..
Check Stock

Titan Attachments 30HP HD Steel Fence Posthole Digger w/6' Auger 3 Point Tractor Attachment

  • Boom and frame material: 2 7/8" high strength steel tubing Standard 3 point connection For use with tractors up to 30HP.
  • safety shields on driveline gear box Ujoint and gear box output Shaft Oil filled Gearbox.
  • Instructions and safety manual included. PTO Speed: 540rpm.
  • Weight: 206 LBS Gearbox rate: 2.92:1 Matched Auger: 6" 9" and 12" augers available separately.
  • We need your phone number! For the trucking company to schedule delivery. Without it there will be delays..
Check Stock

Titan Attachments 30HP HD Steel Fence Posthole Digger w/9' Auger 3 Point Tractor Attachment

  • Boom and frame material: 2 7/8" high strength steel tubing. Standard 3 point connection. For use with tractors up to 30HP..
  • Safety shields on driveline gear box Ujoint and gear box output shaft. Oil filled Gearbox..
  • Instructions and safety manual included. PTO Speed: 540rpm.
  • Weight: 206 lb Gearbox rate: 2.92:1 Matched Auger: 9", 6", and 12" augers available separately.
  • We need your phone number! For the trucking company to schedule delivery. Without it there will be delays..
Check Stock

2 Stage Telescopic Transmission Jack 1100lb w/Pedal 360°Swivel Wheel Lift Hoist Adjustable Height Hydraulic Jack for Garage Shop Black

  • Wide Application: Floor jack can be used in many places, including car gearbox, auto repair station and other objects weighing no more than 500KG.Mainly used in high position installati on and removal of automobile gearbox, car engines, conveyor of front, etc..
  • Rated Capacity: Transmission jack holds up to 1100 lbs/ 0.5T weight and Lift Range 39" - 73.
Check Stock

ATF Automatic Transmission Filter, Replace 25430-PLR-003, 044-0382, 25430PLR003, 0440382 Compatible with Honda Accord Civic CRV CRZ Element Fit Insight Odyssey, Acura - ILX MDX RDX TL TSX

  • When shifting gears in the automatic gearbox, friction is generated between the mechanical parts. Over time, this friction causes the generation of metal shavings that the oil will spread through the gearbox. It is essential to have a good filter to prolong its usefulness and ensure the proper functioning of the gearbox..
Check Stock

uxcell DC 3V 5RPM Micro Speed Reduction Motor Mini Gear Box Motor with 2 Terminals for RC Car Robot Model DIY Engine Toy

  • Small speed reducing motor with metal gearbox increases torque..
  • Micro gearbox motor for DIY RC Hobby, vehicles, drones, planes and more..
  • Mini dc gear motor is small and lightweight to easily mount a wheel on the motor's output shaft or copter blade..
Check Stock

Lancer Tactical LT-25 Full Metal M4 AEG Airsoft Rifle (Black with High FPS)

  • Built-in Lancer Fast Trigger with MOSFET to regulate electric flow and protect trigger contacts.
  • MATERIALS – Gen II version upgraded with a Metal body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • Quick-change spring system for rapidly adjusting muzzle velocity.
  • BATTERY – Simple battery (11.1V LiPo battery) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
  • Recommend 11.1v Lipo Battery for Best Performance.
  • Upgraded gearbox with 18:1 steel gear set and high-speed motor.
  • Fires in full-auto and semi-auto, with a functional safety Full metal version 2 gearbox with an upgraded torque motor 20mm top optic rail mounts scopes, sights, and magnifiers.
  • [Require Speed Loader]Mid-capacity magazine holds 120 rounds and only needs one full wind up Retractable crane stock adjusts to meet the battle situation.
Check Stock

Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS

  • Make sure this fits. by entering your model number..
  • Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
  • Includes: Gearbox Halves w/Idler Gear Shaft - Gray (Part # 3691A) Input/Slipper Shaft w/ Spring Pin (Part # 3793) 2 Ball Bearings - 5x11x4mm (Part # 5116 x 3) 20 Fiber Washers - 5x8mm (Part # 1985) Planetary Gear Differential & Steel Ring Gear (Part # 2388X) 22T Top Steel Drive Gear (Part # 3195) Steel Idler Gear - 30T (Part # 3696) 6 Button Head Machine Screws - 3x23mm Hex Drive (Part # 2591) 6 Button Head Machine Screws - 3x20mm Hex Drive (Part # 2580) 6 Flat Head Hex Dri.
  • Part number(s) included (in factory packaging): 3691A 3793 5116 1985 2388X 3195 3696 2591 2580 3931.
Check Stock

Lancer Tactical Gen 2 Airsoft Rifle SD M4 GEN 2 Polymer- Electric Full/Semi-Auto Airsoft AEG Rifle with 0.20g BBS, Charger and Battery (Tan High FPS)

  • MATERIALS – Gen II version upgraded with a nylon reinforced body.
  • version 2 gearbox features metal gears along with the cylinder teeth.
  • Polished 6.03 mm tight bore inner barrel for improved air seal and accuracy Full metal Version 2 rear-wired gearbox provides easy battery access and ample space 20mm top optic rail mounts scopes, sights, and magnifiers.
  • Enlarged trigger guard accommodates users wearing gloves One-piece outer barrel provides stability and zero wobble Upgraded gearbox with 18:1 steel gear set and high-speed motor.
  • BATTERY – Simple battery (9. 6 V Nunchuck) placemen.
  • automatic power shut down once charger (included) detects battery is fully charged.
Check Stock