Top Tool Box Insert Reviews

XINGYHENG 210pcs M3 M4 M 5 M6 M8 M10 M12 Wire Thread Inserts Steel Sheath Helicoil Type Screw Repair Sleeve Assortment Kit with Plastic Box

THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
SPEEDS UP INSTALLATION – Quickly insert threaded inserts for soft wood with this optional threaded insert installation tool without time-consuming thread engagement..
FITS STANDARD POWER DRILLS – A standard hex shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
FOR USE WITH THREAD INSERTS – This threaded insert tool is used exclusively to quickly drive in Hex Drive Inserts..
IT’S AS EASY AS 1-2-3 – Installation is easy. Simply drill a hole with a standard drill. Thread an E-Z LOK thread insert into place with this optional drive tool..

Check Stock

Wacky Rig Fishing Worm Kit Wacky Soft Bait Weedless Hook Jig Head Hook O-Rings Wacky Rig Tool Fishing Lures Tackle Box Kit

WACKY KIT - 136pcs kit includes 1pcs wacky rig tool, 5pcs jig head hook, 10pcs weedless hooks, 20pcs worm hooks, 10pcs senko baits, 10pcs egg sinkers....
WACKY TOOL - Made from durable aluminum and stainless steel, features excellent rust-resistance, accommodates most plastic worms, quickly and easily....
WACKY WORM - Molded with soft, flexible plastic, features superior presentation and durable long term performance. Rigging up in a Wacky Rig, Texas....
HOW TO USE - Quick and easy to rig plastic worms wacky style. Just insert a plastic lure, slide a rubber o-ring over the tool onto the plastic bait....
PORTABLE BOX - These fishing tackles are equipped with a compact box. Box Size: 4.7*3.9*1.3inch. Compact and easy to take arround..

Check Stock

E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6

THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..

Check Stock

Metal Stair Tread Template Tool, Stair Tread Jig w/12 Basement Retread Stairs, Stair Tread Gauge for Accurately Measuring Angle and Length (Black)

❤️Perfect Tread Template❤️: This stair tread tool is made of high-strength aluminum alloy with high toughness and precision CNC machining. The surface is not easy to fade. Highly adjustable and useful for other projects..
❤️ACCURATE❤️: This tool has 12 basement stairs to retread and the scale is etched by laser to ensure its clarity and accuracy. This tool was a must for doing the job. The tool was extremely accurate, easy to assemble, use, and light weight..
❤️VARIABLE LENGTH❤️: This stair tread gauge tool package has extension parts with a length of 16.9 inches (No.A), 11.4 inches (No.B) and 8 inches (No.C). It could be set up for multiples sizes between 8 Inch to 55 Inch..
❤️WILDLY APPLICATION❤️: The jig is perfect for accuratly measurement method of cutting wood to fit stairs and this can be used for so many different applications. Unless something is perfectly square, which is rare, this jig can transfer the angles to the workpiece. The jig is well made and holds tight from the measuring process to the tracing process!.
❤️WELL PACKAGED❤️: All parts neatly fit into the provided box with foam insert to keep and protect tool. Box fit nicely into my tool drawer. Amazing tool without the bulk..

Check Stock

Joywayus 40PCS 3/8 Tube OD Brass Compression Insert Tube Fitting

Suitable for the outer diameter of the pipe:3/8"..
Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..

Check Stock

Joywayus 40PCS 5/16\ Tube OD Brass Compression Insert Tube Fitting

Suitable for the outer diameter of the pipe:5/16"..
Product Material: Brass. 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
Sleeve for a tube compression insert fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way..
Package included: 40pcs Compression Insert. It is packed in plastic box to avoid product damage..

Check Stock

Accusize Industrial Tools 5/8\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0058

Smooth finish on each turning tool holder marked with tool holder style and shank size..
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
9pcs hex screw, Hexagon key and Aluminum fitting case..
*** Insert kit Item#: 2988-0058INSERTS (Sold Separately on Amazon)***.

Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
Screw on triangle style insert with a chip breake.
10 pieces per box, provides longer tool life than uncoated grades.

Check Stock

Carbide Milling Inserts TPCN32PDTR TPG32 Mutilayer Coated Carbide Turning Inserts for indexable End Mill,10pieces/Pack

TPCN32PDTR（TPCN1603PDTR） Indexable Carbide Milling Insert 1/8" Thick,11 degree relief angle..
Material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
For turning and milling carbon and alloy steels, tools steel and stainless steel.
Screw on triangle style insert with a chipbreaker.
10 pieces per box, provides longer tool life than uncoated grades.

Check Stock

15 Pcs Thread Inserts M14x1.5 Female Thread Repairing Accessory Assortment Kit Drill Helicoil Repair Kit

...or engine repair and otherautomotive applications for steel, cast Iron and aluminium. This kit helps create a stronger internal thread in soft metals and protects tapped threads against wear and damage..

Check Stock

Enduro Engineering Trail Side Multi Tool 22mm/27mm/30mm Fits Yamaha YZ/WR 19962019 Sherco 2013-2019

Fits: Yamaha 1996-2019 125-450 YZ/YZX/YZF/YZFX/WR.
Fits: Sherco 2013-2019 250-510 Enduro Models.
Perfect axle wrench tool to carry out on the trail or store in your tool box..
This set includes a wrench with a 27 and 30mm hex along with a two sided insert featuring a 22mm and two stroke spark plug 13/16 hex..

Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..

Check Stock

Enduro Engineering Trail Side Multi Tool 17 27 32mm Front Rear Axle - Compatible with 1994-2019 KTM Husaberg Enduro Engineering

Fits: 1994-2019 KTM, Husaberg, Husqvarna 85cc-530cc.
This set includes a wrench with a 27 and 32mm hex along with a two sided insert featuring a 17mm and twostroke spark plug 13/16 hex..
Perfect axle wrench tool to carry out on the trail or store in your tool box..

Check Stock