Top Tonneau Cover For Ford Ranger Reviews

ESI Ultimate Tailgate Seal with Taper Seal Compatible with All Ford Model Years F150 F250 F350 F450 Ford Raptor and Ford Lightning

  • Upgraded kit uses 2 less cut pieces. The original and patented Tailgate Seal compatible with All Ford Model Years F150, F250, F350, F450, Ford Raptor and Ford Lightning. This kit uses the Large Tailgate Seal for the sidewalls versus the Standard Tailgate Seal which eliminates using 2 extra small cut pieces. To purchase the Standard Tailgate Seal kit for other pickups search ASIN: B00IPQWXZQ. MADE IN USA.
  • Keeps out dust and water that enters in through the tailgate gap and sidewalls, when using a truck bed cap or tonneau cover.
  • Automotive grade EPDM rubber with 3M ST1200 tape. Adheres to all surface finishes including spray on bed liners. Reduces tailgate vibration..
  • Packaged or online directions must be followed to properly install this product. Apply when the air and surface temperature is between 55° - 104°F (13° - 40°C). This product requires 25 lbs. of pressure to bond adhesive..
  • Not compatible with Ford Ranger (search ASIN: B07YF5BL8M). Not compatible with Ford Maverick (search ASIN: B0BWV7HJMZ)..
Check Stock

UnderCover SwingCase Truck Bed Storage Box | SC206D | Fits 2019 - 2020 Ford Ranger Drivers Side

  • Fits 2019 - 2020 Ford Ranger Drivers Side.
  • The UnderCover SwingCase maintains a 3-inch clearance from the truck bed and works with virtually all tonneau covers:....
  • This toolbox swings out nearly 180° towards you for easy access from the tailgate and swings back into a locking position....
  • The SwingCase has a key-lockable lid and can hold up to 75 lbs. of cargo. It features an organizational tray, as well as a....
Check Stock

ESI ROK Block 4.25 inch Tailgate Gap Cover and Ultimate Tailgate Seal with Taper Seal 6ft for Sidewalls

  • Both ORIGINAL ESI EPDM rubber seals eliminate dust and water from entering in through the tailgate gap and sidewalls when using a truck cap or tonneau cover. Adheres to all surfaces including spray on bed liners..
  • 4.25 inch width ROK BLOCK covers the tailgate gap and eliminates debris from falling into the gap, greatly reducing clean-up time when hauling material. Doubles as a tailgate seal for the tailgate gap. For drop in bed liners ROK BLOCK installs under the liner..
  • 6ft patented Ultimate Tailgate Seal with Taper Seal installs on the sidewalls. Packaged or online directions must be followed to properly install this product..
  • PARTS IN THIS COMBO KIT ARE NOT COMPATIBLE WITH THE FOLLOWING PICKUPS: Chevrolet Silverado, Silverado with Multi-Flex Tailgate, 2021 and newer Ford trucks with a hinge retainer bracket, Ford Lightning, Ford Maverick, Ford Ranger 2019 and newer, Ford Raptor, GMC Sierra, Sierra with MultiPro Tailgate, Nissan Frontier, Nissan Titan, RAM 2500 and 3500, RAM with RamBox, RAM with RamBox w/Multifunction Tailgate, Honda Ridgeline with Dual Action Tailgate and all pickups/utes outside the U.S. market..
  • Apply when the air and surface temperature is between 55° - 104°F (13° - 40°C). This product requires 25 lbs. of pressure to bond adhe....
Check Stock

BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover | 448332 | Fits 2019 - 2023 Ford Ranger 5' 1' Bed (61')

  • Fits 2019 - 2023 Ford Ranger 5' 1" Bed (61").
  • ULTIMATE SECURITY | The BAKFlip MX4 tonneau cover has durable aluminum panels that automatically latch as the cover is partially or fully closed, and is fully locked once your tailgate is closed.
  • STYLISH MATTE FINISH | Featuring matte-finished aluminum panels, protecting against marks, scratches and UV damage.
  • as well as premium upgrades to the perimeter seals and hardware.
  • 100% BED ACCESS | Operate this cover closed, folded or flipped up, all without covering the 3rd brake light. Paired with a dual action tailgate seal for tailgate operation open or closed.
  • WE’VE GOT YOUR BAK | The MX4 truck bed cover is rated up to 400 lbs of evenly distributed weight and is easy to install. This hard fold has a 5-year, hassle-free warranty, with a US-based support team.
Check Stock

UnderCover Swingcase Truck Bed Storage Box | SC206P | Fits 2019 - 2023 Ford Ranger Passenger Side

  • Fits 2019 - 2021 Ford Ranger Passenger Side.
  • The UnderCover SwingCase maintains a 3-inch clearance from the truck bed and works with virtually all tonneau covers: soft, hard, folding, and rolling.
  • This toolbox swings out nearly 180° towards you for easy access from the tailgate and swings back into a locking position over the wheel well for maximum bed access.
  • The SwingCase has a key-lockable lid and can hold up to 75 lbs. of cargo. It features an organizational tray, as well as a moisture seal to help keep contents dry and protected against the elements.
Check Stock

SHARCAR USA Hard Tri-Fold Truck Bed Tonneau Cover | Fits 2019-2023 Ford Ranger 5' Bed,Black

  • Compatibility | the hard fold cover fits 2019-2023 Ford Ranger with 5' Bed (Not for models with Factory Utility Track Sys. & Cargo Bar Sys.) Noted:This cover place on the top of truck bed rails, and the first panel near cab can't stand up..
  • Sturdy Hardware | SHARCAR USA hard tonneau cover uses fiberglass reinforced plastic and aircraft-grade vinyl hardware to act as a strong protector of the truck bed and tailgate.
  • Multi-function | the hard folding cover provides a solid storage space for your cargo.
  • the anti-moisture, anti-impact, scratch resistant features allow the product to have resistance against weather exposure, chemicals and corrosion.
  • Easy Damage-free installation | the USA patented design is engineered for super easy installation. Thanks to the new style clamps, there is no need to drill holes.
  • Warranty | 3 year warranty against defects in hardware, materials and workmanship under its intended use (conditions apply).
Check Stock

TOPCOVER Hard Quad Fold Truck Bed Tonneau Cover Fits for Ford for F150 2004-2023 Styleside 5'5\FT Bed, Black Pickup Truck Bed Cover

  • PERFECT FITMENT - TOPCOVER Hard Quad Fold tonneau cover fits for Ford F150 2004-2023 only Styleside 5'5"FT bed, for Ford F150 accessories..
  • DURABLE TONNEAU COVER - This Hard Quad Fold bed cover made of heavy-duty FRP and PP honeycomb core. Full range of accessories and high quality aluminum frame ensure stability and unshakeability..
  • EASY INSTALLATION - You can complete all the installation work in 10 minutes without drilling and extra tools in most cases. NOTE - Small holes will need to be cut for vehicle equipped with over-the-bedrail bedliner to secure the clamps.
  • works with under-the-bedrail bedliner without modification..
  • SIMPLE OPERATIONS - TOPCOVER truck bed cover easy assembled and disassembled, when you need to take or place something, just folding the tonneau cover to a position close to the cab and secure with fastening buckles..
  • GOOD SECURITY - Weather-tight and good value seal create an enclosed space prevent your cargo and truck bed from extreme sun rays.TOPCOVER Hard Quad Fold tonneau cover can overcome rain, snow,strong sandstorms and hailstorms. Locking the tailgate and enjoy your trips!.
Check Stock

MOSTPLUS Retractable Hard Truck Bed Roll-Up Tonneau Cover Aluminum Low Pro Compatible with 2019-2022 Ford Ranger 5.1 Feet Bed, 61 inch

  • [Application]-----Compatible with 2019-2022 Ford Ranger 5.1 Feet Bed, 61 inch.
  • [Easy Installation]-----No Drilling and Further modification. Just clamp the rails and fix the cover. Includes Retractable Tonneau Cover, Side Rails, Secure Clamps.Additional weather stripping and Installation manual included..
  • [High Performance]-----Waterproof and UV resistant.It could protect your cargo even in the extreme weather with good sealing ability. The low profile design takes your truck a unique look..
  • [Convenient Usage]-----This cover is easy to operate by the rolling design.You could close or open it only by one-hand,provide more convenient when loading and unloading goods.It also could be washed with soap and water..
  • [Warm Tips] --- Please measure your truck bed length and make sure you have the correct model before ordering. This Retractable Hard bed cover is for 5.5 Feet Bed, 66 inch!.
Check Stock

UnderCover Ultra Flex Hard Folding Truck Bed Tonneau Cover | UX22022 | Fits 2019 - 2020 Ford Ranger 5' 1\ Bed (61\)

  • Fits 2019 - 2020 Ford Ranger 5' 1" Bed (61").
  • STYLISH MATTE FINISH | The Ultra Flex’s durable aluminum panels come with a matte-black finish. The cover itself lies flush mount, enabling you to improve the appearance of your truck.
  • PREMIUM COMPONENTS | This tonneau comes with carpeted under-paneling for added cargo protection inside the bed. The Ultra Flex also features an integrated LED bed rail light for added visibility, & full perimeter seals to help prevent water intrusion.
  • 100% BED ACCESS | The Ultra Flex allows you to drive with the cover in three secure positions: closed, partially closed, & fully opened. The cover folds into an upright position with dual prop rods, without resting on the back of the cab.
  • PURCHASE WITH CONFIDENCE | The UnderCover Ultra Flex hard fold is lightweight and easy to install. It comes with a 5-year, hassle-free guarantee, is proudly made in the USA with globally sourced materials, & is backed by a US-based customer support team.
Check Stock

Calffree Hard Folding Truck Bed Tonneau Cover |CFHT-017|Fits 2015 - 2022 Ford F150 6'5\ Bed (78\)

  • Fits 2015 - 2022 Ford F-150 6.5' Bed (78").
  • Protects your cargo from the elements: The Calffree hard fold tonneau cover is made of durable, weather-resistant materials that keep your cargo safe from rain, snow, and other harsh weather conditions..
  • Easy to install and remove: This tonneau cover features a simple, hassle-free installation process that can be completed in minutes. When you need to access your cargo, simply fold the cover back and your items are easily accessible..
  • Security for your cargo: The hard fold design of this tonneau cover provides added security for your cargo, helping to prevent theft and damage..
  • Improved fuel efficiency: By keeping your cargo covered and protected, the Calffree hard fold tonneau cover can help improve your truck's fuel efficiency by reducing wind drag..
Check Stock

MOSTPLUS Tri-Fold Hard Truck Bed Tonneau Cover On Top Compatible for 2019 2020 2021 2022 Ford Ranger 3 Fold Solid 5 FT-61inch

  • Compatible for 2019 2020 Ford Ranger---5' Feet Bed (61 inch).
  • Easy Installation, all required harness are included. US Patent Design. No Drilling and Further modification. Additional weather stripping and....
  • High Quality: Tri- Fold Truck bed is made by 14mm heavy duty sturdy aluminum with powder coated frames. It has 2 horizontal crossbars to ensure....
  • Waterproof & UV resistant: This tonneau cover can be washed with soap and water, Keeps your equipment inside your bed dry..
  • Bed side rails/cargo racks have to be removed. Please measure your truck bed length and make sure you have the correct model before ordering!.
Check Stock

Pop & Lock – Manual Tailgate Lock for Ford F150 Fits 1987 to 1996 - Works Only with Factory Plastic Handle Black PL2310

  • ... handle, raised lock for ease of operation, and comes with 2 keys..Fit Type: Vehicle Specific.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit..
  • THEFT DETERRENT: This manual tailgate lock discourages theft and creates a secured storage space when used in conjunction with a tonneau cover or truck cap. It mounts in minutes without any drilling and has a UV resistant coating to help prevent your gate lock from fading..
  • TRUSTED SECURITY: Pop & Lock provides the aftermarket price on truck accessories with reliable products for your automotive and truck adventures on and off the road. Through continuous improvement, we work to meet our customer’s expectations while never sacrificing quality..
  • WHAT CUSTOMERS ARE SAYING: A customer shared that this manual tailgate lock is easy to install, works well, and went in within a few minutes with a T30 bit, 10mm socket, maybe a flathead screwdriver if the yellow clips in the tailgate. (October 2021).
  • FOR BEST RESULTS: Pop & Lock is made in the USA and are the industry leaders in aftermarket tailgate lock solutions for pick-up trucks. For best results, customers have also purchased the Gate Defender for added security..
Check Stock

KSCPRO Soft Tri Fold Soft Folding Truck Bed Tonneau Cover Fits for 2019-2023 Ford Ranger 5ft New Body Style

  • Perfect Fit: This soft tonneau cover Perfect Fits 2019-2023 Ford Ranger 5 Feet bed New Body Style.
  • Sturdy: KSCPRO Tri-Fold bed cover has 3 built-in horizontal crossbars offering good support when fully unfolded the cover. Heavy-duty aluminum frame, industrial-strength vinyl and superior perimeter sealing protect your cargo in any weather condition..
  • Durable: It is composed of double layer vinyl which has been thoroughly tested for UV protection and superior tensile properties. Pre-assembled powder coated rails and aluminum clamps are included for trouble-free installation and formidable stability..
  • Easy Installation: All frames and clamps are pre-assembled. Just put it on truck, Clamp it, No Tools are required. In the majority of cases no drilling. You will have a smooth and simple installation by following the instruction paper inside box..
  • Warranty: Limited lifetime warranty! (Please measure your truck bed size or contact us before buying. While we do accept returns, the buyer may be responsible for the return shipping fee if ordered wrong.) Feel free to contact us directly..
Check Stock